Types of dress cuts. Dress "Tatyanka" - simple cut and elegant silhouette

If in previous decades the unisex style prevailed in fashion, over the past few years more and more feminine models have appeared on fashion catwalks. The Tatyanka dress is a popular style, characterized by a simple cut and elegant silhouette.

Photos from fashion shows show that designers often use this style for their collections. Moreover, it makes it possible to use a variety of fabrics, combine them and complement them with a variety of decor.

Story

It is impossible to say exactly who and when came up with the cut of this dress. But there is a version of where its original name came from, and it is very plausible.

Most likely, the dress with a gathered skirt at the waist was named after literary heroine- Tatiana Larina. The fact is that when in the mid-60s they staged a ballet based on the brilliant novel, the artists suggested dressing the heroines in dresses that met the requirements modern fashion.

The style proposed by the artists was to the taste not only of actresses involved in ballet, but also ordinary people. Therefore feminine and delicate dress with a gathered skirt, as they say, “it went with the people.”

Of course, it cannot be said that the artists, while working on the production, came up with something exclusive. After all, in fact, the style of the Tatyanka dress is very simple; it has been widely used before, especially when sewing children's dresses. But it also occupies a more prominent place in adult fashion.

Model features

Tatyanka dresses can look quite varied, however, all models have common features, This:

• narrow top;
• fluffy skirt, gathered at the waist.

The model's bodice can have any cut, the main requirement is that it should not be loose, the bodice should fit the figure. The upper part can be either blind or with completely bare shoulders. The neckline can have any shape - semicircle, square, triangle, etc. The model with an asymmetrical neckline - the Tatyanka dress on one shoulder - looks original.

Sleeves can have different styles. Long sleeves are suitable for models that are made for the cold season, summer dress“Tatyanka” can be sewn completely without sleeves, but outfits with puffed sleeves or wings look very cute and feminine.

The length of the dress skirt can also vary. Most often you can see models that are knee-length or slightly higher. This option is universal, it suits everyone without exception. But maxi-length dresses are more suitable for tall girls. The fact is that a floor-length skirt visually reduces the length of the legs, so it is not suitable for short girls.

Who is it suitable for?

Practically universal model is a dress with a “Tatyanka” skirt, but when choosing a model, do not forget about the characteristics of your physique:

• or an inverted triangle. This style suits broad-shouldered ladies with narrow hips extremely well, as wide skirts perfectly hide the disproportion of the figure. But girls with such a figure should not choose a dress with “lantern” or “wing” sleeves. Either outfits with open armholes or narrow ones will suit them. long sleeves.

• . Girls whose hip volume is significantly larger than their chest volume can also wear a similar style. Under a wide skirt, one can only guess about the true volume of the hips. And to balance the top and bottom, you should choose dresses with decoration on the bodice (ruffles, puffed sleeves). An excellent solution is a dress made from companion fabrics; the bodice should be significantly lighter than the bottom.

• . For girls whose waist is not ideal and has a protruding tummy, the dress will suit"Tatyanka" with high waist. This style is also perfect for expectant mothers, as it is extremely comfortable.

• . Girls of proportional build, whose chest volume and hip volume are approximately equal, and have a pronounced waist, should definitely buy such a dress, as it will perfectly emphasize the beautiful curves of the figure and make the image even more feminine.

• This style is also suitable for overweight women , if they take into account the characteristics of their physique. After all, completeness varies. You definitely shouldn’t choose dresses with tight large print, it is better to give preference to outfits made of plain fabric.

What fabrics are used for sewing?

Tatyanka style dresses can be made from a variety of fabrics. The choice depends on the purpose of the outfit and the season of wear. So, for a casual summer look, the Tatyanka dress made of chintz or fine linen is perfect.

If the dress is made for a special occasion, then you should give preference to silk fabrics, satin, guipure, and chiffon. The last option is especially good if the dress is being sewn for a prom.

In order for a model made of thin and soft fabric to fit perfectly, the skirt, or rather its hem, must be “pulled back”. To achieve this, it is recommended to sew a lace braid or frill along the hem.

To make the skirt more full, you can wear a petticoat under the dress. But many models initially have a skirt consisting of two layers of fabric. Moreover, different fabrics are used.

The underskirt is made longer than the upper. Therefore, a beautiful frill of lace or sewing is sewn onto its lower hem. This frill will peek out from under the overskirt, giving the dress a special charm.

If the petticoat is made entirely of lace, then top part cut out asymmetrical, most often, they choose the option when the hem of the overskirt in front is much shorter than in the back. The second option to demonstrate the beauty of the lace from which the underskirt is sewn is through “tiebacks” that gather the fabric of the upper skirt into beautiful folds.

The winter version of the dress can be made from thin wool or any other dense but well-draped fabric. For sewing, use plain fabrics or printed materials. Particularly popular winter dresses made of checkered or polka dot fabric. Combinations of materials are often used, for example, the bodice is cut out from a plain fabric, and the bottom from a checkered fabric.

What to wear with it?

The details of the ensemble are selected depending on the image being created. The dress can be worn with a jacket, the length of which reaches the waist, or a bolero. A silk scarf or neckerchief will be a wonderful addition to the ensemble.

A wide variety of shoes are suitable for dresses of this style., these can be shoes, sandals, ankle boots. The height of the heel is not important; you can wear ballet flats or stilettos. Only sports style shoes are definitely not suitable.

If you choose a monochromatic outfit without additional decor, then you should wear jewelry with it - a string of beads or a large brooch. It is better to choose a brooch in the shape of an exotic flower; you can pin it both on the chest and on the belt. It is better not to wear jewelry with dresses made of bright printed materials.

A narrow waist can be further emphasized with a belt. It can be matched to the color of the dress or based on contrast.

Fashionable looks

Based on the Tatyanka dress, you can create a variety of fashionable looks. Everything will depend on the type of material from which the dress is made and the selected accessories. An outfit of this style can be worn for a walk around the city or on a date. A similar outfit would be perfect for a celebration.

Casual look

The fine wool dress in white, red and blue check has long, slightly flared sleeves ending in a narrow cuff. The dress has a turn-down collar and button closure at the front. The look is completed with a wide belt of blue color, black ankle boots and small bag rectangular shape.

Business style

Dark chocolate colored dress with narrow sleeves three-quarters should be combined with a cropped jacket beige colour. Classic brown shoes and a sand-colored business bag will complement the look. The look can be complemented with a bright neckerchief.

Summer look

Dress made of chintz with bright floral print, with a lace frill along the hem, should be worn with bright red shoes decorated with cute bows. The color of the shoes can be maintained with a wide belt at the waist. The image will complement summer hat made of straw, a wicker handbag and a wide bracelet on the arm.

For celebration

Bright red dress made of shiny satin with bare shoulders decorated wide frill along the hem made of matte textured fabric and the same wide belt with a buckle. The ensemble should be paired with black pumps. Complete the look with a pearl bracelet and pearl earrings. It’s best for this ensemble hairstyle will suit with curls.

Instructions

You can sew a stylish coat dress from thick jacquard. Choose models with a high neckline that will hold its shape well due to the structure of the fabric. For a dress-coat, it is advisable to choose a style with a minimum number of details.

A laconic style and textured dense fabric are indispensable attributes of a fashionable autumn dress. A straight-fit model with three-quarter sleeves is a great idea for a dress in business style. This outfit can be made from “suit” wool fabric in a soft, neutral shade. Choose wool of beige, light gray, milky color. These shades can be easily combined with stylish, bright accessories that will help create a fashionable and elegant look.

From dense denim You can sew a shirt dress. The advantage of this outfit is that it is suitable for the office, for a date or for a party with friends. With the help of a shirtdress, you can create a wide variety of outfits, combining it with leather accessories or combining it with luxurious fur vests.

Another outfit option that can be made from thick fabric- hoodie dress. This style is good because it fits perfectly on almost any figure. The loose cut of the dress will delicately hide imperfect hips and a voluminous waist. When choosing fabric, do not limit yourself to subdued colors and neutral shades. A hoodie dress can be bright and elegant. Viscose, wool or thick cotton are suitable for this style.

When choosing a dress style made of thick fabric, pay attention to A-line models. These dresses look great with long sleeves and wide, massive cuffs.

From thick fabric you can sew an elegant sheath dress that visually models your silhouette. On a plain dress, you can add contrasting inserts on the sides and sleeves. These elements will highlight your waistline and visually make your figure smaller.

You can sew a stylish sweater dress from thick textured knitwear. This dress looks especially good on slender and tall girls. You can complement this outfit with a bright belt or massive jewelry.

Participants in role-playing games are often faced with the need to sew costumes - but not everyone is able to sew even the most simple thing, which will help them emphasize their fantasy image. If you do not have cutting and sewing skills, it will be useful for you to know how to sew a simple hoodie, which, in combination with various accessories and decorations, can create one or another image on role-playing game, dedicated to both modernity and fantasy world.

Instructions

Take a large piece of fabric with loose edges - thin felt or drape works well. The edges hoodie and does not need to be processed, so give preference to material that does not require zigzag and overlock processing.

For sewing hoodie and measure the circumference of the chest, placing the centimeter on the most protruding parts of the chest and shoulder blades, and passing it under the arms. Add 20 cm to the chest circumference. The resulting figure is equal to the required length of your piece of fabric.

The width of the fabric should be one and a half meters. On the chest, back and under the arms hoodie are provided with inserts. The width of the insert on the back is 14 cm, on the chest – 7 cm + 7 cm, and under the arms each insert is 10 cm.

Subtract these numbers from the total length of the fabric that you calculated by adding 20 cm to the bust circumference, and divide the resulting number by 4. Let's call the resulting number “X”. Lay the fabric out on a flat surface and draw stripes on it perpendicular to the edges.

The first stripe should be 7 cm wide, the next - X cm, then 10 cm, X cm, 14 cm, X cm, 10 cm, X cm, 7 cm. Instead of X, substitute the figure obtained after your individual calculations.

On the top edge hoodie and make armholes for the neck and arms, shortening seven-centimeter sections to create the front and back neckline. Reduce the side stripes by 20-25 cm to create armholes.

Fold the fabrics with straps with the wrong sides facing each other and stitch. Bend hoodie along the marked lines and stitch it 0.5 cm from the fold. Sew the shoulder seams. Make slits on the sides so that the suit does not restrict your movements.

note

The hoodie pattern does not have armholes or seam allowances, so even a person who has no idea about cutting fabric can sew it.

Sources:

• how to sew a sweatshirt

If you have an unwanted long-sleeved shirt in your boyfriend's closet that you like in a color, put it to good use. Breathe into the thing new life, sewing from a regular men's shirts flirtatious dress baby-doll The process will not take much time, but both you and the former owner will definitely like the result shirts.

You will need

• - rubber;
• - scissors;
• - sewing machine.

Instructions

First, button up your shirt and lay it out neatly on a large table or floor. Use scissors and boldly cut the shirt crosswise at the armpit level. At the same time, hold the shirt so that it does not move and the cut line is smooth on both sides.

Now take the bottom shirts, which is destined to become the skirt of the future dress. Fold and stitch the top edge so that the elastic can be inserted. Insert pieces of elastic bands (5-6 cm) into the armpits on each side, make gathers and stitch the elastic bands in the drawstring so that they cannot move out of place.

From the sleeve shirts you will get the details for the bodice of the dress. To do this, cut off the sleeve, cut off the seam along its length and cut off the cuff, drawing a semicircle with scissors. Cut the workpiece in half along the fold line of the former sleeve. You should be left with two pieces that resemble a cone in shape.

On the narrow part of the cones, make darts approximately to the middle of the length of the parts, and stitch them.

Finish the edges of the bodice parts, folding them twice by half a centimeter, and connect the parts, slightly overlapping one another. Now the bodice can be sewn to the bottom of the dress. First, baste the pieces for fitting. And only after that finally sew on the parts of the dress.

All you have to do is sew the straps from the remaining shirt fabric and secure them to dress. To do this, cut out long strips 2-3 cm wide, stitch them lengthwise, turn them inside out and iron them with a hot iron. Having given the straps the desired length, sew them to the dress: one end to the edge of the bodice, the other to the back of the dress. You can also make wider straps. An alternative is to place the strap behind the neck, sewing both ends to the bodice.

Dress from shirts ready. If you wish, you can decorate it with a bow, flower or stylish appliqué.

A dress is the most attractive thing in a woman's wardrobe. It helps to surprise, delight, attract and charm the male sex. Evening, cocktail, classic black - there are hundreds of options, and each has its own zest. Buying and choosing such an outfit often causes a lot of trouble. Cut, style, size, color, quality - you need to try on dozens of models to find the one and only perfect one. However, you can look at the situation from the other side and save own time and the means to sew a fashionable dress yourself.

You will need

• - sewing machine;
• - scissors, needles, threads, measuring tape, ruler, crayons;
• - sewing magazines;
• - decorative ornaments;
• - cuts of fabric.

Instructions

Look through sewing magazines and just fashionable glossy publications to find the model you like. Choose dresses that have a simple cut if you are new to DIY tailoring. Think about what you will wear with your chosen outfit, whether it will look good on your figure, what color is best to choose. Then head to a fabric store to get everything you need.

Prepare your workspace. A table or flat surface is required for cutting. Take care of good lighting and cleanliness of the surface of the sewing machine, namely the plates and feet, where the fabric may inadvertently get dirty during the sewing process.

From fabric with sequins, cut a rectangle 18 cm wide and about 90 cm long. It is advisable to use elastic fabric, since the bustier dress model requires a tight-fitting bodice. Sew the side seam and use an overlocker. Fold the top of the top in half and stitch at a distance of 5 mm from the edge. Set the stitch speed to minimum if your sewing machine has this function. Otherwise, sew slowly, carefully lowering the needle, because the sequins, when placed on top of each other, prevent the needle and stitch from moving evenly.

Fold the gray fabric into a square, like a napkin, so that the front side of the cloth is inside. Now cut the circle skirt. Let the length of the skirt remain arbitrary for now, and let the base of the top be free.

Gather the top edge of the skirt using spandex threads. Then hand baste the top to the skirt, creating decorative folds on both sides of the product, offset to the center. Try on the dress, it should fit tightly on your chest, not fall off and not interfere with movement. If everything fits as it should, stand on your heels and mark the required length of the finished product with chalk or a pin near the mirror.

Sew both parts together, take out the basting, and finish the edges. Focusing on the mark of the required length, grind straight line, leaving a hem allowance of one centimeter. Cut off the excess and overlock the bottom edge of the part. Then fold the fabric and stitch 0.3 mm from the edge.

The dress can be decorated with a thin openwork strip of lace along the bottom of the skirt, peeking coquettishly from under the main fabric. You can add decorative straps made of rhinestones, beads or metal chains.

note

Ironing the lines in finished product, do this from the wrong side using a piece of white calico or gauze. Sequins melt when they come into contact with the surface of a hot iron, so be careful.

Helpful advice

Choose fluid, delicate fabrics such as crepe satin, double-layer chiffon, wet silk or stretch satin. The panel with sequins can be replaced with a lace piece embroidered with beads and bugles.

The coat has reigned in the collections of many fashion designers for several years now. Plain coats made of cashmere, wool, and bouclé are in fashion. The coat makes a woman's image elegant and graceful. You can become the owner of a fashionable item without huge expenses if you sew a coat with your own hands. Of course, sewing it is very difficult, but the result will pay off handsomely.

You will need

• - coat fabric;
• - lining fabric;
• - matching threads;
• - pattern;
• - tailor's chalk;
• - scissors;
• - buttons;
• - sewing machine.

Instructions

Pick up a model in one of the fashion magazines. Take your measurements and compare them to the included size chart. Copy the pattern according to your size. To do this, it is best to use tracing paper. Lay out the sheet with the pattern on a flat surface and place tracing paper on top of it. The part numbers of the pattern you need are indicated in the margins (note that the color of the number must match the color of the pattern lines). Transfer all markings and inscriptions onto paper. If your figure differs from the standard one, then add or reduce the required number of centimeters in the problem area (for example, at the waist or hips). Although this can be adjusted during fitting.

Fold the fabric in half with the right side facing inward. Lay out the pattern, taking into account the direction of the grain thread, and trace it with chalk. Cut out the parts, leaving seam allowances of one and a half centimeters along the side and shoulder sections, one centimeter along the neckline and three centimeters along the bottom line.

Using running stitches, transfer marking lines to the front side, for example, the middle of the front and back or the place for pockets.

From the lining fabric, cut out the details of the front, back, sleeves and burlap pocket. However, if you are sewing a light coat, for example, from gabardine, then you can do without a lining.

Stitch the darts. Iron them upward on the chest, and the longitudinal ones towards the middle of the back/front. Sew a middle seam in the middle of the back, leaving the vent open. Iron the seam allowances to the left side of the back. And on the right side, iron the allowance for the vent to the wrong side. Sew the left side diagonally, taking the allowance for the vent.

Next, sew the side and shoulder sections. Sew the hems along the shoulder sections with facings. Please note that the edges of the lapels should be slightly wider than the front lapels so that they do not puff up or ride up. To ensure that the skirts keep their shape, duplicate them with non-woven fabric.

Stitch the collar pieces together, trim the seam allowances close to the seam and cut the corners diagonally. Turn it right side out and sew it into the neck of the coat, inserting it between the coat, the collars and the facing. Pin and stitch all the parts. Turn the lapels right side out. Stitch and iron cleanly. Make raised seams.

Now start sewing the sleeves. Fold them in half and sew a seam. Fit them along the edge and sew them into the armhole. Sew on the shoulder pad and try on the garment to determine the sleeve length. Press the hem allowance at the bottom and hand-stitch it with blind stitches.

Sew strips to the pockets. Sew the burlap from the lining fabric to the facings, leaving an open area in the middle, through which you will subsequently turn the pocket out. Turn the facing and lining right side out and stitch to the edges of the pockets. Turn inside out, iron and sew to the fronts by hand using blind stitches.

Make side and shoulder cuts for the lining. Sew in the sleeves. Sew it to the inner edges of the hems and the facing of the back neckline. Place the lining sleeves into the coat sleeves and sew with blind stitches.

Turn the hem allowance to the wrong side of the coat, iron it and hem it with blind stitches by hand. Sew the lining along the vents and bottom by hand. Iron the product and hang it on hangers.

Mark the location of the loops and buttons on the front of the coat. Process the loops using a special foot on a sewing machine. Use a sharp blade to cut holes. Sew on the buttons.

Sources:

• sew a light coat

One of fashion trends is multi-layering. In such outfits, the lead singer is the vest; it is made from suit fabrics, knitwear and fur. By the way, fur vests are the hit of the season. They were presented in their collections by J.Mendel, Loewe, Cynthia Steffe and many other brands. It is not at all necessary to pay dearly for a designer model; any needlewoman can sew such a vest.

You will need

• - several fur plates;
• - lining fabric;
• - pattern;
• - “magic” tailor’s chalk;
• - fur coat hooks;
• - finishing trim made of leather or textile;
• - needle;
• - threads;
• - razor blade;
• - sewing machine.

Instructions

When you go to the store to choose fur for sewing a vest, take the pattern with you. There you can attach plates to it and buy the required amount of fur. If you are going to alter an old fur coat, then peel off the lining, mark the worn areas on the inside and attach the pattern.

Trace the pattern with “magic” tailor’s chalk, traces of which disappear by themselves. It can be purchased at specialized fabric stores. Watch the direction of the pile. Cut out the parts with a blade or a sharp scalpel, being careful not to damage the fur.

Cut out similar pieces from the lining fabric. Sew the shoulder and side seams of the lining. Press the seams.

Place the parts of the back and shelves together with the fur facing inward. Sew the side and shoulder seams by hand using an overcut or goat seam.

Place the lining into the fur vest (with wrong sides facing each other). Stitch the cuts.

On the wrong side of the vest, using a tailor's chalk, draw lines for combining the finishing trims at a distance of 5 cm from the cuts. Transfer the matching lines using running stitches to the front side of the vest.

Sew the details of the finishing tape using a zigzag stitch along the outer edges of the vest, while unscrewing the pile onto the details of the tape. Place folds on it at the bottom corners of the shelf. Turn the binding to the front side, going around the edges of the vest, pin it with safety pins along the alignment line and sew a zigzag stitch on the front side.

There is another less complicated way to process the cuts, however, the fur in these places will be wiped off, but if you plan to wear the vest only occasionally, then this method will suit you. Fold 0.5 - 1 cm of fur to the wrong side and carefully hem it with a hidden seam. Start at the neckline, then hem the placket while sewing on the fur coat hooks. Then process the armholes and bottom of the product. The fashionable vest is ready.

Sources:

• Review fashionable vests season autumn-winter 2011-2012
• sew the vest yourself

On cool days, an autumn coat gives you a feeling of comfort and warmth. For the elegant stylish woman, who follows the latest innovations and follows modern fashion trends, a classic-cut coat is a win-win option. Best collections world fashion is not ignored this item clothes.

You will need

• - coat fabric;
• - lining fabric;
• - buttons;
• - buttons.

Instructions

Choose your favorite coat model from a fashion magazine. Measure your chest and waist circumference, chest height, shoulder and back length. Decide on the length of the product and sleeves. According to the results obtained, select your size from the table attached to the patterns. Copy the pattern onto paper.

From lining and coat fabric made of wool or mixed fibers, cut out two pieces of one-piece trim, front and back. Then make two upper and elbow parts of the sleeve, as well as a collar and its stand.

Sew the darts along the chest, place them down and press. Sew the strips to the shelves, press the seams. Cut the allowances closer to the stitching. Turning the leaf inside out, stitch it along the entrance of the pocket to the shelf.

Sew a raised seam at the top and bottom of the pocket entrance. Iron the seam allowances and press the leaf to the side edge. Fold the opening allowances into the pockets with burlap, baste and stitch the leaves along the stitching seam. Set the burlap to the front, press and sew. Sew the edges of the leaves by hand using blind stitches.

Place the middle seam, then the shoulder and relief seams. Place the one-piece edgings on the right side and stitch the facing of the back neckline. Baste the facing with the edges to the neckline and stitch. For a while, leave them with their coats facing each other with their front sides facing each other.

Sew the collar elements to the stand pieces. Cut seam allowances and press. Sew each piece closer to the seam. Then stitch the outer collar sections. Make sure that the lower collar is slightly narrower than the upper one. This will prevent the corners from lifting.

Place the collar between the coat and the collars. Sew the lower collar into the neck of the collar, and the upper collar into the neck of the coat. Press the seam allowances open and, turning back the facing, sew them as close to the running seams as possible. Then turn the facing down.

Sew the elements together and sew the seams of each sleeve. Sew the sleeves into the armholes, attach the shoulder pads to the product. Make a tab and sew it to the coat through large buttons, placing them along the edges. Having previously sewn the lining, tuck and hem the coat.

Cut out the fabric. Fold it in half and attach the pattern, trace the pattern and cut out the parts, leaving 1.5 cm allowances for all cuts. Next, you need to transfer the lines of darts and seams as accurately as possible to a second similar part. To do this, fold the patterns with the wrong sides facing each other, exactly matching all the cuts and tap the surface with your palm; chalk lines should be imprinted on the second part.

Baste all darts, side and shoulder seams and do your first fitting. Make any necessary adjustments. To make it easier to specify the lines of seams and darts, put the dress on the wrong side. Baste along the refined lines and do a second fitting. A sheath dress should fit your figure perfectly, so try to achieve the best result.

How to make a shirt dress pattern

To make a dress pattern, use any suitable shirt pattern straight cut. Extend the pattern of the front and back to the desired length of the product. There is no need to change the remaining elements, since this model has the same fastener, collar and sleeves as an ordinary shirt.

Fold the fabric for sewing the dress lengthwise with the right side inward. Attach the pattern to it and trace along the contours. Cut out the pieces, leaving 1.5 cm along all cuts for seam allowances, and start sewing.

Sewing technology is advanced

Place the details of the front of the shirt dress on top of each other, matching all the cuts, and stitch in the middle to the fastener mark. Unfold the seam and press it to the right along with the full clasp facing.

Sew the facing to the left side of the front fastener. Turn it inside out. Sew the straps for the fastener along. Right side For the front, stitch across the end of the fastener, catching the left edge. Sew the loops on the right side.

Back sewing technology

On the back part from the wrong side, sew the folds from the top edge to the mark. Place the folds towards the sides. Baste them along the top edge of the back.

Attach the yoke pieces to the front and back sides of the back and stitch everything together. Topstitch along the stitching seam. Sew the yoke to the shelves in the same way. Next, sew the sides of the shirt dress. Try it on and check the armhole line and length of the product.

Collar sewing technology

Duplicate the part for the upper part of the collar with non-woven fabric. Fold it to the bottom with right sides facing each other and stitch the parts along the outer edges. To make the collar look neat in the finished product, you need to cut off the seam allowances close to the stitching and cut the corners diagonally. Turn the collar right side out, carefully straighten the seam and iron its edges.

Fold the rack pieces right sides inward. Insert the collar between them, matching the cuts, and stitch the parts together. Turn the stand inside out and stitch along the top edges. Stitch the bottom edge of the stand into the neckline. On the right side of the post, make a loop for the fastener.

Technology of sewing sleeves and processing the bottom of a shirt dress

Sew the seams on the sleeves. Iron hem allowances to the wrong side and hem using a machine. Place the parts along the edges. To do this, lay a wide stitch from mark to mark close to the cut. Pull the seam slightly, dampen it and iron.
Sew the sleeves into the armholes.

Sew buttons on the left side of the fastener. Try on the dress, buttoning it up. Check the length of the bottom again.

Bend the cut to the wrong side 2 times. Do a fitting. The lines of the right and left shelves should match perfectly. Sew the hem or hand hem it with a blind stitch. Remove the basting and iron the product.

note

Many fabrics shrink after the first wash, so wash the material before you start cutting. Thick fabric will become much softer after washing, and it will be easier for you to work with it.

Helpful advice

When starting to sew a dress made of thick fabric, take a sewing machine needle that is several sizes thicker than the needle that you use for sewing thin fabrics.

Modern women have taken on themselves great amount men's responsibilities. Not only do many of them support families, run businesses, fly airplanes, raise children, build houses and plant trees, but they also prefer a clothing style that is close to that of men. Today you can much more often see a woman in jeans, shorts or pantsuit than in feminine outfits. But they are the ones who create that elegant image of a woman before whom men bow their heads, knees and even hearts. This is probably why skirts, blouses, and sundresses have become so popular today. But for different life occasions, as well as for different women, not the same styles of dresses fit, but completely different ones.

Classic dress styles

A dress is the main element of a woman’s wardrobe, thanks to which she becomes elegant, gentle, sweet, mysterious and so attractive to men. Let them wear T-shirts, jeans and voluminous sweaters terribly comfortable, a wardrobe without dresses is definitely not a woman’s. And a closet that does not contain this outfit is evidence of a real crime. But if there is a bunch of shapeless rags hanging in it, then this is also not a plus in favor of the woman. She should know which outfit suits her figure, color type, and lifestyle. To do this, at a minimum, you need to be familiar with the styles of dresses.

The dress is a must-have in every girl’s wardrobe!

So, the first type is a sheath dress, which was preferred by the graceful Edith Piaf, the sophisticated Jacqueline Kennedy and the sophisticated Audrey Hepburn. With the help of a sheath dress that fits tightly to the body, you can emphasize the slimness of your figure. But its advantage is that it is suitable even for obese women.

A sheath dress will highlight your figure.

Often this model does not have sleeves, and the neckline is made square, round or oval. The classic length for such a dress is considered to be knee length. An everyday outfit of this style is usually made from cotton, but suiting fabric and viscose are also suitable. For evening options, satin, silk, brocade, velvet and satin are used.

You can wear a sheath dress to work, a party, a restaurant or on a date. They wear shoes under it classic pumps on high heels. But it doesn't have to be a stiletto heel, because a thick heel also looks great with this romantic outfit. And girls who do not recognize heels can be offered a choice in favor of ballet flats, but on condition the right choice these comfortable, elegant shoes.

A classic-cut jacket, blazer, or stylish coat and a leather jacket. As an addition, you can choose accessories in the form of a wide bracelet, beads, brooches or earrings.

A classic cut jacket and accessories will complete the look.

Significant corrective possibilities are hidden in the cut of a tulip dress. Its skirt, shaped like a bowl or an inverted tulip, was developed in the 60s of the last century. The length that does not reach the knees is classic for this style. Such dresses can be made from any type of fabric, but most often preference is given to satin, linen, denim and silk, which can hold their shape and maintain soft, deep folds.

Modern designers These feminine styles of dresses are complemented with large pockets, they are made with draperies and flounces, and decorated with sparkles, beads, sequins and rhinestones. A tulip dress is suitable for a date, going to a restaurant, or going to work, but only if there is no strict dress code. It is also important to choose the right accessories for it.

A formal shirt, a blouse with a jacket, or a jumper will go perfectly with a tulip skirt. Suitable for knitwear Jean jacket. The top is also complemented with a chiffon top, corset, lace blouse or cardigan. As for shoes, there is one rule: to more long skirt a higher heel is selected.

We often choose a dress style not just by its beautiful cut and fabric, but by its practicality. In this regard, the recognized leader is the wrap dress. Its author is Diane von Furstenberg. She came up with the design of this outfit in the 70s of the last century, but to this day this style is an invariable attribute of her collections. A robe dress is a semi-fitting or adjacent model, wrapped to one side. Often the cut is complemented by folds or frills. Distinctive feature The outfit has a V-shaped deep neckline. A nice feature its advantage is that it suits both skinny and plus-size girls. A must-have for a modern summer wardrobe is a robe dress, decorated with bright colors and prints.

This outfit is indispensable on vacation and while walking around the city. Such a dress in a discreet plain color is suitable for work. color scheme. In the evening version, the dress can be ideally complemented with high heels, a clutch and a large necklace. For fans of casual style, the option of combining a dress with moccasins or ballet shoes, a neckerchief, and a large bracelet is appropriate. A true lady will maintain her impeccable image if she shaves such a plain outfit made of knitted fabric and complements it with pumps with elegant stiletto heels, long coat or a trench coat and a small handbag. The ideal length of the dress in this ensemble is at knee level.

A dress in a solid color scheme and stiletto heels are ideal for an evening out.

Dresses for body volume correction

A very popular dress style that hides excess volume and gives a slim figure is the shirt dress. It was introduced into fashion by the legendary Coco Chanel, but it was invented by Cristobal Balenciaga. This dress is cut in the form of an elongated shirt, slightly fitted, with a loose fit, a classic shirt collar, and full-length buttons. It can be worn under a belt or without it. Since only light fabrics are used to sew it, it is worn mainly in the warm season. A shirt dress can be an evening dress made of silk, or an everyday outfit made of cotton fabric.

Shirt dress - with or without a belt, made of light fabric - a good choice for urban style

You can show off in this universal thing on vacation, go to a cafe, and even to work. For everyday use, the option is the most practical, and it is made of linen or cotton. It is better to choose evening attire for a restaurant from satin or silk. Jeans, thick colored tights or tight leggings go well with a shirt dress. You can throw a loose vest over it, or even better, a light leather jacket, which will make your look stylish and relaxed. Shoes for this look are sneakers, leather high wedges, or even sandals. And the latest fashion trends dictate the combination of a shirtdress with a blazer or bomber jacket.

Bag dresses do not go out of fashion either. Moreover, such outfits do not have to be considered only as styles of dresses for overweight women. The authors of this model are Hubert de Gevanchy and Cristobal Balenciaga, who created this brilliantly simple outfit when the shirt dress was not yet a thing. The fabric of this style glides freely over the body, hiding all the flaws of the figure. This silhouette is the opposite classic dress emphasizing the waist. The model is sewn without sleeves, has a loose fit, and is slightly tapered at the bottom.

This dress is most suitable for slender, tall girls. It is appropriate on a date, in a restaurant, and goes best with high-heeled pumps. The choice of shoes suitable for it depends on its length. For example, under a floor-length bag dress, it is best to wear summer sandals, ballet shoes and other shoes with flat sole. It is better to choose high-heeled shoes for a short dress. But the platform and wedge heel are better in created image do not turn on. As for jewelry, then the best option- long beads. A tiny handbag or even a clutch will complete the look.

Tube dress, Empire style, bandage dress, polo dress, bustier dress - this is just a small list of outfits that never lose their relevance. Each of them has a lot of its own advantages, with which you can easily bring your parameters to the desired ideal. Only visually, of course, but it means so much for a woman to be satisfied with her appearance! And isn’t this a good reason to return the dress to your wardrobe?