DIY multilayer paper sculptures. Paper sculptures

In Japan, paper art such as origami, kirigami and similar sculptures have long been traditional. How they surprise and delight beautiful crafts made of paper arranged in three-dimensional compositions.
Sometimes it can be very difficult, or even impossible, for a non-professional to repeat them even using diagrams and master classes. But if you really want to do something like that, you start looking for compromises. In the current search I came across the author of the paper Benja sculptures Harney. Benja himself successfully applies his favorite hobby in the commercial field, advertising, mass media, so this is not a hobby for him, but a job. Idea of this creativity I really liked it; making a figure this way, in my opinion, is much easier than folding it using the origami technique.

The method is really not that difficult to master. At the graphic design department, we made layouts in this way, while almost no attention was paid to the technology itself. You draw the model, then draw its layout with all sides, leaving bends for fastening and connecting the sides. Remember that we all glued together the same cube or parallelepiped from paper in geometry lessons at school.

In design, more complex figures are glued together in this way, such as building models and other three-dimensional compositions. Of course, three-dimensional vision is very useful in such work, but you can start with simple shapes, gluing them together.

By applying layer after layer of colored paper, the composition becomes multi-level, volume is created, and the figures acquire three-dimensionality.

Benja was fascinated by this process during his studies, still in the same graphic design department, and now very beautiful paper models come out of his hands. They are so interesting and neatly executed that you can’t call them anything other than paper sculpture.

Creation Benja Harney is somewhere on the border between design and art.

His works are original and attract attention. Large brands and famous people are showing interest in them.

For example, Benja made paper wings for the Sydney showcase of the luxury brand Hermes.

For Kylie Minogue's Australian tour, they came up with a pop-up book for her album.

Original creativity Patty and Allen Eckman.

Artists first mix acid-free cellulose using raw cotton, all of which is placed in a mold, compressed by vacuum or by hand. In this case, excess moisture is gradually removed, but the drying process is very long. When the cast is removed from the mold, then the finishing process begins, the most delicate one. Some details are removed, some are added, which ensures very fine detailing.
(MODULE=240&style=margin:20px;float:left;)
This is very Long procces, sometimes taking months of work. In some ways it is similar to the bronze casting process. Finished product - white, very light and with many fine details.

(MODULE=241&style=margin:20px;float:left;)

Calvin Nicholls is a unique artist and sculptor. His sculptures (which can be called three-dimensional paintings) are created from ordinary paper. Paper cut and glued in a special way creates amazing detail in the works. Calvin mostly creates paper portraits of wild animals - bears, lynxes, monkeys, birds and others.
Each voluminous creation takes a lot of time and painstaking work. The first step is to create a rigid skeleton, which is the outline of the future figure. The frame gives the work strength. All other small parts are already attached to the frame. Each piece is cut and textured using a selection of metal and wooden instruments. During the work process, the sculptor constantly monitors the light and shadow on the sculpture. Having completed the main part of the work, the author creates an even more detailed and complex image using studio lighting. At this stage of work, all the nuances of the sculpture are completed.
And finally – photography.

(MODULE=242&style=margin:20px;float:left;)

Danish-born artist Peter Callesen creates incredible works of art from a single A4 sheet of paper. Through a surprising combination of cutting and folding, Callesen creates incredible scenes from the very simple material.
According to him in my own words By eliminating all the information and starting from scratch on a blank white A4 sheet, he feels that he has found material that everyone can relate to. At the same time, the A4 sheet is neutral and open to accept any meaning. The thinness gives the paper sculptures a fragility that highlights the tragic and romantic theme of his sculptures.

Jeff says that he will always become an artist, the most an ordinary artist, but over time he realized that he did not have the necessary abilities and talent. He started working with paper by accident. During his studies, he was given assignments in two subjects: graphic design and according to the drawing. The task was to create something new from some material. He chose paper. And this choice, the art of creating paper sculptures, gave him a sense of what his calling was, in what area he needed to work. He was attracted by the clear boundaries in working with paper and tangible results. And he always enjoyed creating something with his own hands.

Not many craftsmen are engaged in this type of creativity today. And very few have achieved success in this field.

Calvin Nicholas

Paper sculpture made by this a unique artist, amazing and extremely realistic. In 1981, Calvin opened his own design studio in Toronto. And three years later he made his first experiment, trying to combine his love for wildlife and his craving for creativity. This is how paper sculpture was born.

Calvin Nicholas invented his own method of creating volumetric paintings, the subject of which were portraits of animals. First, he creates a rigid paper skeleton of the future object. Then the sculptor attaches small details to it: feathers, hairs, scales. Each piece is given a special texture using wooden and metal fixtures and tools. Nicholas achieves almost one hundred percent realism when depicting representatives of the animal world.

Paper sculpture by Piret Callesen

The whole world today knows the name of this artist. He creates his own paper sculptures using a combination of cutting and folding. Real masterpieces are obtained literally from a single A4 sheet.

These are incredible plot scenes and individual vivid images. His paintings contain deep meaning, the fragility of the material carries romanticism, emphasizes the tragedy of the sculptures, shows how short-lived happiness is, how fragile human life is.

Wet paper sculptures

Spouses Allen and Patty Eckman developed their own unique technique creating real masterpieces from ordinary waste paper. The paper is deoxidized in a special way and turns into a homogeneous mass. A silicone mold is prepared in advance, into which the material is folded, compacted and then dried.

And here the masters get down to business difficult stage work. Using a medical scalpel, the artists work through each the smallest detail, every fold and hair, giving the sculpture amazing liveliness and truthfulness.

It takes craftsmen more than a year to create one masterpiece. After all, first you need to fashion a sculpture from plasticine or clay. Then a silicone mold is made from it to cast the workpiece. And that's just preparatory stage to work.

Of course, the most difficult thing is to remove everything unnecessary with precise movements. Even the smallest mistake in work can nullify all previous work, no matter how long and painstaking it may be.

Paper sculptures at home

Looking at the works of great masters, it seems that this is impossible to an ordinary person. However, it is possible to try to do something similar. Let it turn out not so highly artistically, not so masterfully, but from the heart.

So how to make a paper sculpture yourself?

• First you need to sculpt the figure you want to create from plasticine.
• The template is then covered with layers of silicone sealant. The total thickness of the mold must be at least 3 cm. The procedure is performed in two stages: the first layer must carefully fill all small recesses and crevices, after drying, the second layer directly creates the thickness of the future mold. Then you need to let the form dry thoroughly.
• After all this, the workpiece is carefully cut and the plasticine is removed.
• Now the paper pulp is prepared, with which the form is filled.
• After drying, the workpiece is removed and processed with a sharp scalpel.
• If necessary, paint or varnish is applied to the sculpture.

There are many recipes for creating paper pulp. The simplest one is that the paper is thoroughly soaked and crushed, squeezed out, a little sifted wood ash or gypsum is added to it and kneaded like dough.

From such a mass one can not only cast sculptures, but also sculpt them, as craftsmen do when working with clay and other materials.

Many people are able to make an ordinary airplane out of paper. This is the most simple thing, which can only be done, and also the simplest and light form paper art. In a sense, it can even be called flying art. However, there are people who have taken it to the next level in . Unfortunately, there are not so many of them.

Such masters can transform the classic form of origami in combination with miniature cutting, bending, in different forms and paper cutting techniques, as well as using quilling, into the most beautiful creative artwork that you have ever seen.

Viewing this article, you'll learn how these artists turn sheets of paper into masterpieces and transform ordinary paper cutting into real art. In addition, you will see all these works with your own eyes. The photo shows paper sculptures that were created by the best paper crafts worldwide.

Jen Stark

Jen Stark - contemporary artist. Most of her works are paper sculptures. She also draws and does animation. Jen draws inspiration for her work from microscopic patterns in nature, wormholes and tissue cross-sections (illustrations in anatomy books).

Up and Out Opposite Coriolis Effect

Simon Schubert works and creates in Cologne, Germany. His works are paintings with architectural objects depicted on them. This ordinary situations or objects. Simon Schubert uses white paper And mixed media embossing.

Emma Van List

Daniel Grein

Digital and Print Designer at the University of Applied Sciences, Schwäbisch Gmünd, Germany.

Elodole

Helen Musselwhite

Carlos N. Monila

Olafur Eliasson

This sculpture is in the form women's dress made from pages of a telephone directory.

“I don't stick to tradition, but I strive to create a mixture of modern and traditional styles and create your own own world using this super thin paper lace technique,” ​​says Aoyama.

Cher trained in sculpture at the University of Wolverhampton with a BFA in 3D Design. She passed her final exam at Covent Garden in 1992. Sher works with clay forms and paper.

Yulia Brodskaya was born in Moscow. Before moving to the UK in 2004, she was interested in a variety of creative techniques: painting on fabric, origami, collages, as well as traditional art. In her works she often uses the technique quilling.

Another Western hobby is paper sculptures.

(photo from etsy.com/shop/PaperwolfsShop)

They are used as home decor. Mostly hung on walls:

Placed on shelves and on the floor:

But their point is probably not to somehow decorate your home. The point is to do such a thing with your own hands. This is a kind of handicraft kit, working with which a person calms down, is distracted by something good, and then admires the results of his work.

The paper sculptures shown above are made by computer animator Wolfram Kampfmeier from Germany. He sits at home (because in his main profession he works remotely), invents and does.

He sells on Etsy (through his store etsy.com/shop/PaperwolfsShop, where 6,150 sales were recorded) and, perhaps, not only there. Everyone liked his sculptures so much and sales increased so much that he could no longer cope with orders (despite the fairly high price of a paper kit to create one figurine - on average 55-65 dollars). Then he founded the company and now full-time employees are engaged in the production and dispatch of orders. And the business ideologist was left with a lot of free time and the opportunity to create and come up with new models.

What is good about selling such a product is that it consists of several sheets of paper and can be sent by letter (even abroad). I looked at the international tariffs of Russian mail for sending such letters - they are not that expensive. Delivery of a letter weighing from 101 to 250 g by air costs 180 rubles (3 dollars).

But it’s even better to send your creativity abroad not by paper letter, but by electronic file. Then there is no need to waste time on forwarding, and the file will reach the client in a matter of seconds after payment.

Another computer scientist familiar with 3D model creation programs, Frenchman Stéphane Chesneau, has achieved similar results in selling similar models of similar paper figures:

(this and subsequent photos are from the page etsy.com/shop/OXYGAMI)

And although he sells them cheaper than their paper counterparts (from 11 to 16 dollars per figurine), he sells more (and he doesn’t have to bother with production, packaging and delivery at all). In less than a year, he has already sold more than 3,000 electronic copies (through his Etsy store - etsy.com/shop/OXYGAMI).

And, of course, such a number of sales were ensured by the originality of his models and the quality of the images:

And this despite the fact that there are only 15 models in his store:

But he sold each one several dozen (or even hundreds) times.

It’s interesting how the young man came up with the idea of ​​creating 3D models of paper figures. In the 7th grade of school, during a geometry lesson, they learned how to lay out a three-dimensional three-dimensional figure on paper, in the form of a flat pattern (we did not study this). The boy was so excited about this idea that he began to create similar paper patterns for future volumetric figures. Not everything worked out perfectly for him - because he did the calculations manually (no one had computers then).

Then he abandoned this idea. But he remembered already in adulthood, when insomnia began to overcome him. He remembered his childhood hobby and began creating patterns of 3D figures using a computer. He did them without errors!

At night, he drew his patterns using a computer, and then assembled the figures himself.

And then I decided to sell my designs on Etsy. Judging by the first review from one of his customers, he started selling in November 2016, that is, he sold 3,014 units in about 8 months, which is approximately 376 units per month, or approximately $3,000 in income per month.

It is not surprising that the young man decided to make his childhood hobby his main job. After all, there is nothing better than doing your favorite thing at home, at the computer, and, without making any special movements, receiving $3,000 into your account every month.

I want to emphasize in this regard that if you sell digital information on Etsy ( electronic files), then buyers don’t care what country you live in. The main thing is that using your files you can easily create the figurine that is presented on your sales page.

And another useful idea is that your purpose touched your life back in childhood. Remember what fascinated you then. What were you passionate about? Maybe it's worth doing this again, for a more high level? Then you won’t need to look for a business, you’ve already found it.