Haircuts for short hair. Haircuts for short hair - step-by-step diagrams with photos

Every morning, millions of representatives of the fair sex around to the globe start with a meticulous look in the mirror. Is everything ok front and back? Does the reflection correspond to our ideas of beauty? And only a woman knows how difficult it is to take into account all the details and achieve implementation ideal image. A stylish, well-executed haircut can help in this difficult work. short hair. In hairdressing, women's hairstyles up to 15 cm in length are considered short.

Pros and cons of short models

The advantages of a short haircut are obvious:

1. it is easy to care for;
2. Styling such a hairstyle is quite simple when using modern styling products;
3. it is possible to freely change the image by slightly changing the usual style of styling;
4. the back of the neck and the back of the head remain open, adding sexuality to the image;
5. along with long hair, a woman’s age visually decreases.

As always, after listing the benefits comes “however...” So, however:

• After washing, your hair must be dried - in the morning you can get a very unexpected look by leaving wet hair at night;
• if you want to grow your hair, you will have to go through an unpleasant period when it’s already a pity to cut it, but it’s impossible to style it;
• you will have to spend a little more money on yourself - a short haircut requires frequent adjustments;
• an unscrupulous or unprofessional master can ruin your mood for a long time and appearance, and it is, as a rule, no longer possible to correct the hairstyle;
• lush hair with a short length can look like the head of a dandelion;
• Finally, short haircuts should not be given to those with heavy or sharp features faces.

Sessun - clearly frames the face, is perfect for smooth, heavy hair, but the technology of execution can only be done by a good professional.

Cascade - a gradual transition from short hair at the back to long hair, the technique can be “torn” or double, it’s good to do a graduation. Great option for an oval face.

Modern hairdressing art allows you to personalize any chosen hairstyle using various technologies (grading, texturing) and the synthesis of classic haircut patterns.

Unfortunately, to achieve the ideal look you have in mind, you will have to suffer - finding a high-quality hairdresser who has a sense of style and understands your hair is not so easy.

We cut the hair correctly

Any haircut traditionally begins with washing your hair. There is no need to wash your hair before going to the hairdresser - good master Be sure to start working with this procedure.

• We divide clean, damp hair into four sectors using two perpendicular partings and secure with hairpins.
• In the lower occipital area (back), comb a strand along the hairline. Holding it between your index and middle fingers, pull the strand at an angle of 90 degrees and shorten it to the desired length.
• We continue to work, moving up to the horizontal parting line. We place the strands on top of each other and pull them at an angle to the working plane. We cut the right and left occipital zones alternately.
• In the parietal zone, comb the hair along the growth line and cut it, as in the previous case. The cut border should smoothly flow into the already treated cutting areas.
• Decide on the length of your temples and, starting from it, cut your bangs. Make sure that the line of the resulting “cap” is even along its entire length.
• Give your haircut a smooth, soft look with thinning.

A bob haircut is performed without pulling the strands, that is, the hair is positioned strictly vertically, and the cut line runs parallel to the floor. As a result, you need to make an even, straight cut line.

Scheme of a classic square

• We make two partings: the first from the middle of the forehead to the middle of the neck, the second from the top of the head to the left and right to the top points of the ears. Then we divide the hair again - from temple to temple at the level of the upper edge of the ears.
• In the lower occipital area, separate a strand of hair in the same way as for a bob haircut. We cut to the required length, making sure that the cut is even and strictly horizontal. The resulting strand will be the control.
• We take the next strand of hair 0.5 cm higher, pull it straight down and cut it a couple of millimeters longer than the previous one. We continue to work according to this scheme to the level of the horizontal parting on the top of the head.
• In the upper occipital zone we comb a strand parallel to the additional parting running from temple to temple. We decorate the temples, based on the line of the square at the back. We cut the hair in the direction from the parting, going from the middle of the forehead to the middle of the neck, to the temples, alternating the left and right sides of the head.
• The hair remaining in the area between the main and additional horizontal partings is divided into two parts and cut along the bob line, not forgetting about lengthening.
• Be sure to check the horizontality of the cut line during work.

Features of the cascade

The cascade haircut technique is a bit like a bob, only the work is directed in the other direction. The same length of hair is maintained when combing it to the top, supported by a control strand in the lower occipital area.

Focusing on the type of face and hair, the age and physique of a woman, her individual preferences, based on basic haircut patterns, real masters of hairdressing can create unique hairstyles.

Each woman gets the opportunity to show her individuality, correct minor flaws appearance and enjoy your reflection in the mirror.

Content:

Currently among women different ages Short haircuts are especially popular. The diagrams for their implementation described below will help you perform the haircut correctly.

A woman with short hair always looks well-groomed, modern and dynamic.

In addition to the fact that short haircuts are convenient and practical, they allow a woman to quickly change her image, and the technology for their implementation is very simple. However, keep in mind that short haircuts are not for everyone. Of course, if a woman has an impeccable oval face shape and healthy skin, then short haircut will suit perfect for her. Otherwise, you need to approach the choice of haircut very carefully and scrupulously.

For example, it is advisable for large-boned and overweight women to avoid such haircuts, because this will only emphasize their angularity and massiveness. Very tall and skinny girls This hairstyle is also not suitable, since it is unlikely to add proportionality to them.

But for flexible, slender, graceful women, short haircuts will suit them very well. They will successfully emphasize chiseled shoulders, a slim figure, expressive eyes and a swan neck.

However, some “deviations” from ideality can be disguised by choosing the right haircut. For example, round face A hairstyle with a high crown will lengthen it. If the face, on the contrary, is too elongated, then you need to choose a “boyish” haircut with voluminous sides. The pear-shaped face shape is corrected using a short bob with a voluminous crown and long, torn front strands.

Universal short haircut scheme

This haircut, like any other, is performed only on clean, damp hair.. From the forehead in the center of the head to the highest point, you need to comb out a small strand of hair, about 1-1.5 cm. If the hair is too thick, the width can be reduced to 0.5 cm. This will be the control strand. The remaining hair is pinned up so that it does not interfere with work.

The selected strand should be held vertically and cut, gradually reducing the length from the forehead to the back of the head. After this, the following strands are selected parallel to the control one, moving first to one side of the parietal zone, and then to the other. The technology for carrying out this haircut is called “strand by strand”, that is, each new strand is cut at the same level as the previous one.

Cutting the temples is a little difficult. It is advisable to have some skill to confidently and calmly hold a comb, scissors and short hair at the same time. However, you can quickly adapt to this. The length of the temporal strands is determined by the parietal strands; they must be the same. You need to cut this part, moving along the entire circumference of the head from one temple to another.

After the temples, you can proceed to the lower occipital part. The reference point here is the already trimmed short parts. Small strands should be combed with a vertical parting, gradually reducing the total length of the hair towards the hair growth line on the neck.

If desired, the hair on the back of the head can be made much shorter. To do this, shading is performed. After the hair of all zones has been trimmed, they need to be combed at an angle of 45 degrees and short hairs that interfere with the general form haircuts.

That's it, the main work is over. Now you need to make the edging. To do this, comb all the hair in the direction of growth onto the face and straighten the line with scissors.

The final step will be thinning the hair all over the head. It is performed with special scissors. The depth of thinning should not be more than 3 cm. More modern look will give the haircut new technology thinning called "pointing".

Scheme for a super short women's haircut

The technology for performing this haircut is a bit similar to the universal one. Slightly damp, clean hair is combed in the direction of its growth. Then the highest point of the head is determined. This is easier to do with an ordinary comb. At the highest point, the comb lies horizontally. A strand with a diameter of about 5 cm is separated around this point; if the hair is very thick, then a little less can be done. Then the hair is twisted into a rope and cut off. The height of this cut should be approximately 1.5 cm higher than the desired cutting length. After this, the trimmed part of the hair is combed and pulled up, pinching it between the middle and index fingers. Then the finger hair removal technique is applied. Use it to straighten the cut. This will be the control strand.

In the future, the haircut is performed in radial zones. The hair needs to be divided into zones with radius partings. If they interfere, you can stab them, and if not, then simply mentally follow the given pattern. Hair strands are taken as wide as they can be held between the middle and index fingers. You need to comb them vertically, pulling them slightly towards the control. Already cut hair is grabbed and, focusing on it, new strands are cut. For this purpose, the pointing technique is used.

After finishing the haircut, thinning is done with a special razor. The bangs are trimmed with straight scissors. The slicing technique is also suitable for this purpose.

Scheme of a short youth women's haircut with torn edging

This haircut is suitable for those women who want to visually lengthen their face. The cutting technology and original edging will require experience from the master, so it is not advisable for beginners to take on it.

First, as in previous schemes, zoning is carried out. The haircut starts from the temporolateral zones. A small strand is combed with a horizontal parting. Afterwards you will need to set the length. To do this, you can use the pointing technique. The technology of this haircut implies that the hair cut line will pass slightly above the earlobe. The strands are combed to a width of 1-1.5 cm, and the haircut is done using the strand by strand method. Having reached the back of the head on one side, go to the other side and perform the same actions. Afterwards, the hair is dried and the treatment of the occipital area begins.

The strands are lifted with a comb and the hair is cut with the tips of scissors. First, the central part of the back of the head is processed, and then they move on to the sides. Then a unifying haircut of the upper and lower occipital zones is performed. For this, the technique of cutting hair with a comb is also used.

A better quality haircut can be achieved by processing short trimmed strands using the slicing method. Finishing touch the back of the head is given a border. The entire area is combed with a comb in the direction of growth, and excess hairs that violate the cutting line are cut off. Afterwards, shallow thinning is done with straight scissors.

Now they begin to cut the frontal-parietal zone. On the face, parallel to the growth of the hairline, comb out a strand 1-2 cm wide and determine the length. They begin to do the haircut, moving first from the center in one direction, and then from the other side to the center. This entire area is cut using the strand-by-strand technique; there is no need to pull it back. The bangs are processed along the edge line using the pointing method.

However, to give the haircut a more modern look, it will need to be processed using a non-joining technique, that is, the edging line should be broken and should not have smooth transition. You can also make steps at the temples. This emphasizes the dynamism of the style.

Haircut "Halfbox"

Rice. 4.8. Haircut scheme "Half-box"

The haircut (Fig. 4.8) begins with removing the hair with an electric clipper. The line where the machine exits the hair runs along the occipital protuberance and 1 cm above the ear. The hair of the parietal zone is divided into horizontal partings, cut from the outside of the fingers, combing each strand of hair perpendicular to the head. The length of the hair after cutting is 3...5 cm. After cutting the parietal area, the hair is combed to the temple and back of the head, then shading is done using scissors and a comb, making smooth transition from short hair to long hair. Edging is done with an electric machine.

Boxing haircut

Rice. 4.9. Boxing haircut pattern

A haircut (Fig. 4.9) begins with removing the hair with an electric clipper. The line where the clipper comes out of the hair runs higher than in the “Half Box” haircut, from the temporal protrusion and 1...2 cm below the crown. The hair of the parietal zone is separated by horizontal partings and cut from the outside of the fingers, combing each strand of hair perpendicular to the head. The length of the hair after cutting is 3...5 cm.

After cutting the parietal zone, the hair in this area is combed to the temple and back of the head, then the hair is shaded using scissors and a comb, making a smooth transition from short hair to long hair.

Edging is done with an electric machine.

Haircut "Tennis"

Hair cutting begins from the temple. Using a machine, shading is performed 1...1.5 cm above the upper edge of the ear. Using the same technique, hair is sequentially cut behind the ear and in the lower occipital area. The edging on the temples and neck is done with a machine. The hair is combed in the direction of its natural growth and cut with thinning scissors, creating a smooth transition from short to long hair. Having combed the hair away from the face, proceed to cutting the parietal area. The hair is cut using the finger method, smoothly connecting with the length of the hair at the temple and back of the head. Hair on the parietal area can be cut using either a straight cut or a serrated one. In the crown area to create volume with inside fingers are thinned with straight scissors. The hair of the parietal zone is combed onto the face, the bangs are cut in a straight line.

Haircuts “Hedgehog”, “Beaver”, “Bob”

The styles of these haircuts (Fig. 4.10) are very similar, differing only in the shape of individual sections of the hairstyle, the hair length is short. The “Hedgehog” haircut gives the hairstyle the shape of a slightly elongated ball (see, Fig. 4.10, a). The “Beaver” haircut on the parietal area of ​​the head has the shape of a flat platform (Fig. 4.10, b), the remaining areas of the hairstyle are the same shape as in the “Hedgehog” haircut. The “Bare” haircut differs from the previous two in that it has the shape of a flat platform not only on the parietal area, but also on the temporal areas of the head (Fig. 4.10, c).

Rice. 4.10. Haircuts “Hedgehog” (a), “Beaver” (6), “Bob” (c)

The hair on the parietal part of the head is combed perpendicular to the skin. The peculiarity of this haircut is that the better the hair is pulled up, the higher the quality of the haircut. It is easiest to fulfill this condition on straight and coarse hair; the length of the hair in the parietal area should not exceed 5 cm. If the hair in the parietal area is longer than 6 cm, then it should be shortened using the finger method. After shortening, the hair is moistened with water, then with gel.

The hair is placed in a vertical position, holding the comb in the left hand and the brush in the right. The comb is placed at the edge of hair growth on the forehead and combed through the hair from the forehead to the crown. The comb is moved towards the crown by 5...6 cm, and the brush is inserted into the hair. The brush is moved in the same direction as the comb. When the brush begins to move to the back of the head, the comb is removed from the hair and returned to its original position, retreating 2...3 cm from the edge of hair growth on the forehead. All hair in the parietal area of ​​the head is treated in this way. At the border between the temporal and parietal zones, as well as the occipital and parietal zones, the hair is combed by moving the comb and brush upward to the parietal zone. After combing, the hair must be allowed to dry, then proceed with further processing.

The area is performed holding a comb in the left hand and scissors in the right hand. The comb and scissors must be placed in a horizontal position. From the edge of hair growth on the forehead, the comb is inserted into the hair and begins to slowly move towards the back of the head, while the scissors are held over the comb parallel to it. As the comb advances, the hair it captures is cut off, but provided that the hair is in a vertical position.

The work is done smoothly, the scissors and comb simultaneously move towards the back of the head. When cutting the parietal area, you need to look in the mirror more often, where the result of the hairstyle being performed is more clearly visible.

The hair of the temporal and occipital zones is removed using a machine or using the shading method, giving the cut a vertical or oval shape.

"Bob-kare" in a men's haircut

Rice. 4.11. Bob haircut

A control strand of hair is isolated with an arched parting (Fig. 4.11). The width of the control strand at the temple and above the ear is 3 cm, at the back of the head the width of the control strand is 6...7 cm. The hair of the control strand is removed and edging is performed. Parallel to the arcuate parting, a control strand 1 cm thick is isolated, combed down tangentially to the head and cut from the inside of the fingers, giving the hair cut line the shape of an arcuate parting. The cut line runs along the section of hair that has been removed, covering it by 1...1.5 cm. Parallel to the control strand, the next strand of hair is isolated, combed down tangent to the head and cut from the inside of the fingers, focusing on the length of the previously cut hair strands And so, strand by strand, tangentially to the head, all the hair is cut to the central parting.

The edging of the hair on the bangs can be done according to the length of the hair, which was obtained during the haircut, or the hair can be shortened, giving the edging an oval shape.

Haircut "Garson"

Separate the hair with a parting (Fig. 4.12, a). The parting runs from ear to ear through the crown of M. The haircut begins from the occipital area. At the top of the head, along the entire length of the parting, a control strand is isolated, combed perpendicular to the head and cut from the outside of the fingers (Fig. 4.12, b). A vertical parting is made in the center of the occipital zone, dividing the occipital zone in half. Using a vertical parting in the center of the back of the head, select a control strand, comb it perpendicular to the head and cut it from the outside of the fingers, focusing on the length of the hair of the control strand on the top of the head. The length of the hair of the vertical strand towards the neck decreases to 1...2 cm (Fig. 4.12, c).

Rice. 4.12. Haircut "Garson":
a - identification of zones through the crown; 6 - cutting the control strand of hair along the parting; c - cutting hair from the occipital area; d - cutting hair in the temporal zones; d - hair cutting of the parietal zone

Parallel to the previous strand, the next strand is separated with a vertical parting, combed perpendicular to the head and cut, focusing on the length of the hair of the previously cut strand. So, strand by strand, the entire occipital area is cut from the center to the right, then to the left.

Temporal area hair cutting. Using a vertical parting parallel to the edge of hair growth at the temple, select a control strand, comb it perpendicular to the head and cut it from the outside of the fingers, reducing the length towards the ear. The length of the hair at the top of the strand is 4...5 cm, and downwards it decreases to 1...2 cm. So, strand by strand, the entire temporal zone is trimmed (Fig. 4.12, d). Attach the hair of the occipital zone to the hair of the temporal zone, grab a strand of hair behind the ears in one movement and cut it from the outside of the fingers, trimming their length.

The hair of the parietal zone is cut using the finger method from the crown to the face. Each strand is cut in three grips, first in the middle, then from the sides, connecting the hair of the parietal zone with the temporal zones (Fig. 4.12, e).

The edging is done with straight scissors, starting with the bangs. The fringe line is made in a straight line slightly below the eyebrow line. The temples are shaped in a straight or oblique line with the ear open. The hair of the occipital zone is edged depending on individual characteristics hair growth

Haircut "Ring"

The hair on the crown area is separated with a circular parting and secured with a clip.

The haircut begins from the lower occipital area, where the shading is performed with thinning scissors. Hair length 1...2 cm is determined taking into account individual characteristics. Then shading is performed on the temporal areas. Haircutting the parietal area begins with the design of a control strand. Using vertical partings in the center of the back of the head, select a control strand of hair. They comb it perpendicular to the head and cut it with straight scissors from the outside of the fingers. The length of the strands is 3...5 cm, depending on their individual characteristics. The hair of the parietal zone is separated with horizontal partings, strands of hair are combed perpendicular to the head and cut from the outside of the fingers with straight scissors, focusing on the length of the hair of the previously trimmed control strand.

The hair in the area of ​​the crown is combed perpendicular to the head and cut with straight scissors using a general grip on the outside of the fingers. Hair length is determined at 10...12 cm, taking into account their individual characteristics. To ensure a smooth transition from long strands on the crown to short hair in the occipital, temporolateral and frontal zones, the hair is combed from the crown in different directions and separated by radial partings. Each strand of hair is combed perpendicular to the head and cut from the outside of the fingers, smoothly connecting long hair crown area with shorter hair in other areas of the head. Edging is done at the end of the haircut, making it with straight scissors or a clipper.

Features of performing a bob haircut

The hair is separated by partings. The first parting runs from the forehead to the middle of the hairline on the neck. The second parting runs from ear to ear through the top point of the head (Fig. 4.13, a). The haircut begins from the back of the head. Using a horizontal parting parallel to the edge of hair growth on the head, select a control strand of hair. The hair of the control strand is combed down tangentially to the head and cut from the inside of the fingers in a straight line. So, strand by strand, all the hair in the occipital area is cut, combing it tangentially to the head (Fig. 4.13, b).

Rice. 4.13. Bob haircut":
a - dividing hair into zones; b - cutting hair from the occipital area; c - cutting hair in the temporal and parietal areas of the head

Hair cutting of the temporal and parietal zones. Using a horizontal parting parallel to the edge of hair growth at the temple, select a control strand of hair, comb it down tangent to the head and cut it from the inside of the fingers, continuing the straight line of the occipital zone. So, strand by strand, all the hair in the temporal and parietal zones is cut, each strand of hair is combed tangentially to the head (Fig. 4.13, c).

Based on the basic bob haircut, you can create various haircut silhouettes. Let's consider several options.

Option 1 (Fig. 4.14). Perform the “Care” according to the above method, determining the total length of the hair.

Rice. 4.14. Option 1 for a bob haircut

Hair cutting in the parietal area. From the edge of hair growth on the forehead, a control strand of hair is separated with a horizontal parting, combed perpendicular to the head, and cut from the outside of the fingers in a straight line. So strand by strand is cut to the middle of the parietal zone. A strand of hair is isolated with a vertical parting coming from the middle of the frontal notch. The length of the selected strand is equal to the section of hair taken on the fingers. The hair of the selected strand is pulled to the trimmed hair and cut from the outside of the fingers, focusing on the length of the hair in the parietal zone. Vertical partings are extended to the crown and encircled in a half ring. The hair from the crown area is combed perpendicular to the head, twisted into a rope and cut with a straight or oblique cut, focusing on the length of the hair in the parietal area.

Option 2 (Fig. 4.15). Hair is cut according to the above method. The temporal and occipital zones are separated by vertical partings. Each strand is combed from the surface of the head at an angle of 90°, i.e. perpendicular to the head. The hair of the selected strand is cut from the outside of the fingers, connecting the length of the hair of the parietal zone with the edging obtained with the “Bob” haircut.

Rice. 4.15. Option 2 for a bob haircut

Option 3 (Fig. 4.16). The haircut is performed on shoulder-length or below-shoulder length hair. When performing a bob haircut, they create the length of the edging of the future haircut. A horizontal parting, running from ear to ear through the top point of the head, separates the occipital zone from the parietal and temporal zones. In the center of the parietal zone, a control strand of hair is isolated with vertical partings, combed perpendicular to the head and cut from the outside of the fingers, giving the cut a straight or oblique line (Fig. 4.16, a). Then all the hair is combed one by one to the control strand of hair and cut at its level (Fig. 4.16, b).

Rice. 4.16. Option 3 for a bob haircut:
a - cutting the central strand on the parietal zone; b - cutting of the temporal and parietal zones; c - cutting a strand of hair along a vertical parting; d - haircut of the occipital area

If the hair along the vertical parting on the trimmed side is raised perpendicular to the head, you will get a straight cut line. This line will be the control line when cutting hair in the occipital area (Fig. 4.16, b). The hair of the back of the head is divided in half with a vertical parting, which makes it possible to conveniently divide the hair of the back of the head into horizontal partings. So, strand by strand, the hair is cut at the top of the back of the head, pulling it towards the control strand passing through the top point of the head, cutting off from the outside of the fingers.

Hair cutting of the lower occipital zone is done as follows. The hair is separated by vertical partings, each strand is combed perpendicular to the head and cut from the outside of the fingers, smoothly connecting the length of the hair of the upper occipital zone with the hair of the edging obtained with the “Bob” haircut (Fig. 4.16, d).

Haircut "Sesson"

The hair is separated by partings. The first parting runs from the forehead to the middle of the hairline on the neck. The second parting runs from ear to ear through the top point of the head. The third parting runs along the entire edge of hair growth on the head, highlighting the control strand (Fig. 4.17, a). The control strand is cut from the back of the head. The strand is combed down tangentially to the head and cut from the inside of the fingers, giving the cut an oval shape (Fig. 4.17, b).

Rice. 4.17. Haircut "Sesson":
a - dividing hair into zones; 6 - cutting the control strand of hair on the back of the head; c - cutting the control strand on the parietal zone; d - cutting a control strand of hair at the temple and performing a graduated haircut over the entire scalp

Then they move on to cutting the parietal area. The hair is combed onto the face and cut from the inside of the fingers, giving the cut an arched shape (Fig. 4.17, c). The temple hair is combed down and cut from the inside of the fingers, smoothly connecting the bang line with the nape line.

In parallel to the control strand of hair, select the next strand, comb it tangentially to the head and cut it from the inside of the fingers, focusing on the length of the hair of the control strand. Using this method, one or two strands of hair are cut tangentially to the head.

All subsequent ones are combed from the surface of the head at an angle of 45°, while observing exact method haircuts - strand by strand. When cutting hair using this method, hair is graduated (Fig. 4.17, d).

Haircut cascade"

The hair is separated by partings. The first parting runs from the forehead to the middle of the hairline on the neck. The second parting runs from ear to ear through the top point of the head.

At the place of their intersection, a square is selected, each side of which is 3...4 cm, the selected strand of hair is the control.

Rice. 4.18. Haircut cascade":
a - selection of a control strand of hair; b - cutting strand by strand

The control strand is combed perpendicular to the head and cut from the outside of the fingers in a straight line. The length of the control strand is arbitrary (Fig. 4.18, a).

The haircut begins from the left occipital area. Using a parting parallel to the control strand, select a strand of hair, comb it up tangentially to the head and cut it from the outside of the fingers, focusing on the length of the control strand. So, strand by strand, all the hair in this zone is cut (Fig. 4.18, b). Selected areas of the head are cut alternately according to the same pattern as the right occipital area.

Layered haircut

Using a circular parting, select a control strand on the top of the head, comb it perpendicular to the head and cut it from the outside of the fingers, giving it certain length. The length of the control strand is 7...9 cm (Fig. 4.19, a).

Rice. 4.19. Layered haircut:
a - selection of the control strand; 6 - hair cut line from top to bottom

In the center of the occipital zone, a control strand of hair is isolated with a radial parting, combed perpendicular to the head and cut from the outside of the fingers. The hair cut line starts from the control strand at the top and goes down to the extension (Fig. 4.19, b).

So, strand by strand, all the hair is cut around the circumference. Then edging and styling are done.

ADVICE FROM A HAIRDRESSER
When choosing a haircut length, do not forget about convenience (styling, daily care) and hair condition.

ADVICE FROM A HAIRDRESSER
No matter your hair length, you can create different variants hairstyles, if, of course, the haircut for hair of equal length is done accurately and accurately.
From straight hair middle length Try a wild mane with curls. To do this, dry your hair and apply strong holding foam to your hair. Then, directing the hair strands back, curl your hair with medium curlers. Blow dry your hair and let your hair cool. Remove the curlers and gently straighten the strands with your fingers. Shape individual strands by lightly moistening the hair strands with gel.

Now cut the temples and hair behind the ears to the hairline on the neck.
When all the hair is trimmed, take a comb and comb the entire head lengthwise and crosswise to remove any protruding hairs.
After this, comb your hair the way it should be in your hairstyle, and make edging and thinning.
A haircut of equal length can be done according to other schemes, for example, starting from the top of the head.
Then you can move in any direction. The main thing is to pull the strand at 90° to the head and comb strands no wider than 1 cm.
The third way to cut hair of equal length is to comb the hair along the growth line around the entire head with zero pull, that is, straight down. Cut hair to desired length.
This will be the control strand. Then move to the center of the head, while all subsequent strands must be pulled 90°.

ADVICE FROM A HAIRDRESSER
You have to be especially careful when cutting curly hair because you can't predict how much shorter your curly hair will be when it dries.
If possible, wet a section of curly hair at the top of your head, blow dry it, and estimate the difference in length between straightened and curled hair.

Hair cutting can be done using any technique, including thinning scissors or using the
No matter how you cut your hair, at the end you definitely need to do some edging and thinning of your hair.
To perform edging, comb all hair thoroughly in the direction of hair growth and cut off all strands and hairs that violate single line haircuts.
Repeat the edging several times.
Thinning can be done in any way.
For thin hair, it is good to do root thinning, especially for hair in the upper occipital zone.

Dividing hair into zones

Frontal hair cutting

Upper occipital hair cutting

Side hair cutting

A HAIRCUT

1-3. Divide your hair into zones as shown in the diagrams.

In contact with

4. Cut the hair of the occipital area inside the triangle with partings parallel to the sides of the triangle, with a 90° extension to the surface of the head. The control strand is movable.

5. Cut the temporolateral zones, separating the strands with diagonal partings with a 45° extension to the face. Take a control fixed strand from the previously trimmed occipital area.

6. Comb the hair of the temporo-lateral zones and draw the perimeter with a 0° pull, as shown in the figure.

7. Comb the hair of the facial “horseshoe” zone forward and shape the perimeter with a 0° pull, connecting the bangs with the temporo-lateral zones.

8-9. Connect the hair of the top of the head with the bangs, combing them up towards the center, and cut them lengthening towards the bangs.

COLORING

Color formulas:

Formula A. Tinta Color 2000 (60 ml) + Tinta Cream Developer 6% (1:1).

Formula B. So Pure Color 754 (30 ml) + So Pure Color Developer 6% (1:1).

Formula C. So Pure Color 754 (30 ml) + So Pure Color Developer 3% (1:1).

Formula D. So Pure Color 8.4 (30 ml) + So Pure Color Developer 3% (12).

10. Dye the hair roots with Formula B. Select diagonal strands on the parietal part, as in the picture, and lighten them with Formula A. Tint the rest of the hair with Formula C. Rinse thoroughly. Apply Formula D to bleached strands.

COLORING

Natural level 7.

1. Lighten your hair to a light blonde using 40 g of CHI Blondest Blonde clarifier and 10 g of CHI Infra Highlift BB lightening ammonia-free ionic cream dye with 6% CHI Color Generator color developer (1:1).

Mix 20 g of lightening ionic cream color CHI Ionic Permanent Shine Hair Color 10B and 4 r CHI Ionic Permanent Shine Hair ODlor Blue Additive with 3% color developer 10 Vol CH Color Generator (1:1).

2. Apply a thick layer of dye to the hair of the side areas and the back of the head. Comb the hair on the top of the head.

3. Evenly distribute the paint along the entire length from roots to ends using a brush.

A HAIRCUT

4. Cut the occipital area, starting from the middle, using the “scissors over comb” method. Hold the scissors and move the comb horizontally.

5. Connect the hair of the side zones with the back of the head, holding the comb parallel to the arched parting.

6. Use the tips of the scissors to trim around the ears, avoiding the sideburn area.

7. Cut the hair of the lower layers of the temporal zone, separating the strands with vertical partings and slightly pulling them away from the side zones.

8. Trim the hair of the crown area short and evenly using the “razor over comb” method. Part the hair towards the crown, cutting off the ends using the slicing method to create a short, soft texture.

9. Cut your bangs horizontally using the pointing method.

Haircut for short hair No. 3.

COLORING

1. Lighten your hair using lightening ammonia-free ionic cream dye CH Ionic Permanent Shine Hair Color 5CG with 3% CHI Color Generator color developer (1:1).

Swipe over top point ear diagonal parting with a forward tilt and a diagonal parting with a backward tilt.

2. Apply CHI Ionic Permanent Shine Hair Color 6RR with 3% CHI Color Generator color developer (1:1) to the hair of the selected section. Apply CHI Ionic Permanent Shine Hair Color 7C with 3% CHI Color Generator color developer (1:1) to the hair of the adjacent section.

3. Alternate coloring formulas, creating play of colors.

A HAIRCUT

4. Divide the hair of the entire surface of the head into five zones, with the exception of the back of the head. All partings should start from highest point heads.

5. Separate the lower occipital part with a horizontal parting. Cut it with strong graduations. The control strand is movable.

6. Cut the side zones using the “scissors over comb” method to avoid hair tension.

7. Connect the side zones with top part the back of the head using graduation and thinning techniques. When cutting the side zones and the back of the head, use a movable control strand.

8. Divide the hair of the front triangular zone into sections with partings starting from the top of the triangle. Cut with a pull towards the crown area. To create a softer texture, use the pointing technique.

9. Comb your hair in the direction of its natural growth and shape the outline of the haircut using the “scissors over comb” technique.

10. Comb the hair from the crown area and bangs towards the side areas, cut with a razor with maximum care.