Draw a theater hall. How to draw a palace - scenery for a puppet theater
Instructions
Draw a rectangle. Divide it roughly into four parts. Parts of the curtain will be placed on the sides and top. And below is the direct place of performance – the floor.
Draw straight lines vertical lines on the left side. There should be at least 5 of them. Then draw 2-3 more, but shorter ones. And after that they are very short, about half as long as the first lines.
Do the same on the right side. Only everything in mirror image.
Place a dot in the middle of the top line of the rectangle. Draw curved lines from it. It’s like you’re depicting a wide-stretched letter “l.” Draw a few more above them. These will be the folds of the fabric. The strokes don't have to be the same. Make them different in both length and thickness. The ends should reach the beginning of the shortest vertical lines. At their junction, draw lines that smoothly diverge to the sides. These will be the curtain holders.
Draw several parallel straight lines bottom of the rectangle. They will represent a plank floor.
Make darkening with deep shading in places that should indicate folds. The same applies to the folds at the top of the curtain. Here the shadow should follow the arched lines. For the effect of spotlight lighting, draw a circle and within it paint everything half a tone lighter. Pay special attention to the color of the plank floor. It cannot be completely monochromatic. Mix several types brown paint or add a little black. Draw the lines of cracks in the floor thick line.
When planning to paint a portrait, landscape or still life, a novice artist is invariably faced with what needs to be depicted folds. These could be folds of clothing or draperies. They are drawn in different ways, depending on the nature and purpose of the work. Sometimes the fashion designer also needs to draw folds. The pleats on the skirt are the most affordable option, so it’s better to start with it.
You will need
- - paper;
- - a simple pencil;
- - colored pencils or paints.
Instructions
Draw the skirt of the model you need. If this is a model with counter fold, then divide the bottom line of the belt in half. From this current, draw 2 diverging lines downwards. Draw lines to the bottom of the skirt. The piece of fabric located between the folds seems slightly shorter than the length of the product. Therefore, step back a little from the bottom and draw a straight or slightly curved line between the folds. When painting such folds, no tricks are required; fill the skirt with one color, and outline the contours of the product and the folds of the folds with a darker color or paint.
To make a skirt or skirt with longitudinal folds, divide the bottom line of the belt into an arbitrary number of parts and add dots. From these points, draw slightly diverging lines downwards. Draw them longer than the skirt itself. Connect end point folds with the point of intersection of the bottom of the skirt and the adjacent fold. Connect all other points in the same way. You should get something like " ". Color the skirt in the same way as in the previous version.
Soft folds are conveyed mainly by chiaroscuro. Draw a product with such folds - for example, or the back of a musketeer's cloak. Please note that if the bottom of the product is projected onto a plane, it will appear not straight, but wavy. Change this line.
In this tutorial we will create red curtains using filters, vector objects and layer styles. You will learn to create realistic textures, draw beautiful ropes, create shadows and work on the shape of vector elements.
Final result:
Step 1
Create a new document in Photoshop (Ctrl + N) with a size of 1000x1000 pixels.
Step 2
Set the default colors (D), create a new layer (Ctrl + Shift + Alt + N) and apply Fiber filter(Filter>Render>Fiber) (Filter>Render>Fiber).
Step 3
Apply Filter Application(Filter > Artistic > Cutout).
Step 4
Apply Motion Blur filter(Filter> Blur> Motion Blur) (Filter> Blur> Motion Blur).
Step 5
Double-click on the layer with the resulting texture to open the styles window. Apply style Color overlay(Color Overlay): Mode - Multiplication.
Step 6
Create a copy of the texture layer (Ctrl + J) and hide the original by clicking on the eye icon of the layer. Tool Rectangular area(Rectangular Marquee Tool) (M) Select the left half of the texture, cut it from the layer (Ctrl + X) and paste it on a separate layer (Ctrl + V). You will notice that after pasting, the red color will disappear. To add color again, copy the color blend style from the previous layer via the context menu and paste it onto the new layer.
While on the layer with half the texture, activate Warp mode(Edit > Transform > Warp) (Edit > Transform > Warp) and change the shape of the texture as shown in the screenshot.
Place the resulting curtain at the left edge, and then create the same one on the right.
Step 7
Select a tool Feather (Pen Tool) (P) and draw the bottom of the curtain as shown below. Lower the layer's opacity to change the curvature of the bottom edge. The color of the figure is not important.
Select the drawn shape (hold Ctrl and click on the layer thumbnail). Go to menu Editing> Clear(Edit > Clear).
Change the bottom edge of the other curtain.
Step 8
Go back to the original texture layer and create rectangular selection. Copy it to a separate layer (Ctrl + J). Place the texture in horizontal position using the mode Free transformation(Ctrl + T), activate warp mode, select warp type Arc from below(Arc Lower) and set the Bend to 70%.
Resize the new curtain piece and center it at the top. Create two copies and place them on the sides.
Step 9
Now we will create the curtain tassels. Choose #ecc242 as your main color. To draw ropes we need to prepare a brush. Create a new document in Photoshop measuring 200x150 pixels with transparent background. Tool Feather(Pen Tool) (P) draw this shape:
Apply the following styles to this shape:
Stroke(Stroke): Position - Outside, Mode - Normal, Stroke Type - Color.
Inner shadow
Result:
Go to menu Editing > Define Brush(Edit > Define Brush Preset) and save the brush as “Rope”. Return to the main document, open the brushes panel (F5), select the created brush and configure it like this:
Select a tool Feather(Pen Tool) (P) in Paths mode and draw a line as shown in the screenshot. Right-click on it and select Stroke the outline(Stroke Path).
In the window that appears, select Brush(Brush) and the outline will be outlined with the previously configured brush.
Step 10
Select all the rope layers and merge them (Ctrl + E). Apply the following styles to the resulting layer:
Inner shadow(Inner Shadow): Mode - Multiplication.
External glow(Outer Glow): Mode - Lightening, Method - Soft.
Casting a Shadow
Step 11
Select for tool Feather(Pen Tool) (P) Shape mode. Draw two elements as shown below.
Apply to bottom element the following styles:
Inner glow(Inner Glow): Mode - Overlay.
Gloss(Satin): Mode - Overlay.
Casting a Shadow(Drop Shadow): Mode - Multiplication.
Result:
Apply the same styles to the top element, except for the style Gloss(Satin). Create a copy of the two elements, rotate them in the other direction (Edit > Transform > Flip Horizontal) (Edit > Transform > Flip Horizontal) and place them on the right curtain.
Step 12
Create a new layer under the top curtains. Select a soft brush with 20% opacity and paint the shadows underneath.
Step 13
Now let's create shadows from the side curtains. Create a copy of the left curtain layer and lower it under the original. Apply style Color overlay(Color Overlay): black color. In Warp mode, change the shape of the shadow a little.
Reduce the opacity of the shadow layer to 30%. Then do the same with the right curtain.
Step 14
Create shadows from the brushes in the same way. To draw a shadow on the floor, use the tool Feather(Pen Tool) (P). Opacity of shadows on the floor - 30%.
Step 15
Place all existing layers into a group (Ctrl + G). Merge the group on one layer (Ctrl + E) and apply a filter Gaussian blur(Filter > Blur > Gaussian Blur) (Filter > Blur > Gaussian Blur) with a value of 5 pixels.
Final result.
Today's lesson will be about how to draw a ballerina with a pencil. A ballerina is a girl who dances incredibly beautiful dance, and although the drawing cannot convey all its chic, it is possible to capture one moment. The most common ballet movement, often depicted, is when a girl stands on one leg, reaches up, and, throwing her head back, extends her arms. She is gentle as well as sophisticated. There are many figurines in the same pose. Although not everyone understands ballet, in reality it is the most complex and sophisticated dance. The girls dancing remind him grape vines, because they are also elegant and flexible.
But its grace is not as easy to convey with pencil on paper as it might seem. So you should proceed step by step.
So, in order to understand how to draw a ballerina step by step, you need to take a pencil and a sheet of paper. Just remember the rule - do not put pressure on the pencil to easily remove errors.
Step 1. Any person begins to be drawn from a frame. For a ballerina, you need to start with three circles - the head, chest and hips. They are connected by lines. The arms are extended to the sides, one leg is back, and the other is on the ground, slightly bent. 
Step 2. Next you need to give it a little shape - that is, add a shoulder and legs, up to the knee. 
Step 3. This step is probably the most difficult, because you need to depict the face and head beautiful dancer. To do this, draw the neck, face and hair. Since the girl is dancing, her hair seems to be in flight. The face needs to be drawn very carefully, not forgetting about the ears, which are exposed in this pose.
Step 4. We need to finish the face and draw the hands. Graceful arms in flight, hands and thin fingers.
Step 5. The next step will be to add volume to her body and chest. You also need to draw a pack.
Step 6. Here the legs are already drawn, dancing, shod in special shoes. The girl stands on her tiptoes, stretching out her other leg, also stretching out her toes. For clear example You can view photographs of dancers - ballerinas.
Step 7. At this stage, you need to erase all unnecessary lines, remove the frame lines and add little details, such as folds of brocade, curls of hair, bends of the neck and body. Draw the top of the dress with a pencil.
Step 8 Now the graceful and unique ballerina can be decorated.
Step 9. The next step will be the background. You can draw a theater scene in the background, or a starry sky, because everything in the drawing should not be natural. You can add a little fantasy.
This is the end of the lesson on how to draw a ballerina correctly. The main thing to remember is that if you don’t get it realistically the first time, you don’t have to give up everything. And draw lines again and again in order to still achieve success in this interesting art– drawing.
Watch the video, it shows how to beautifully draw a ballerina in motion with a pencil. Even a child can master this lesson.
Palaces are different - historical fortresses, fairytale castles or medieval citadels. While studying the past, reading a book about wizards with your child, or watching a fantasy film, you may ask the question: “How to draw a palace?”
A person with a good understanding of art can depict this building in all its splendor, but make the scenery in the form of a fairy-tale castle for your own puppet theater It's quite possible for everyone. And how much happiness home performances bring to children! Or maybe you just want to draw an illustration with your baby for a bedtime story you read? In any case, creativity with children is always productive and great for the development of the baby. So, let's look at how to draw a palace with a pencil.
Preparatory stage
To get started, let's select everything necessary materials: paper, simple and colored pencils, eraser, paints (gouache, watercolor) - and let’s start the image. How to draw a palace, what to do? First of all, you need to pay attention that it is a residential building of very complex architecture. Therefore, when determining the place on the sheet, it is necessary to take into account the height of the roofs of the turrets that will be on at different levels. To correctly place the drawing on the sheet, it is better to determine in advance how many tiers the palace structure will have. In our case there are three of them.
It is best to place the future building in the middle of the sheet, stepping back quite a bit from the bottom. To get started, let's draw a vertical line down the center of the intended image. Let's slightly tilt its top away from the middle of the sheet. This will be the tallest tower of our building. On this preparatory stage finished. Let's move on to creating the building itself.
Image sequence
The main part of the turrets of our castle will be round, and the roof will be in the shape of a cone. In order to consider how to draw a palace with a pencil, we will break down the process step by step:
If you follow in order the description of how to draw a palace step by step, by this moment you should already have the basis of the future building. To complete it, very little is required: select small elements and add some color, so let's continue.
Drawing details
A distinctive feature of a fairytale palace is the many small parts. To give our image a more believable look, we need to draw windows in all the turrets and a door that resembles a gate. They can be depicted as semicircular, rectangular and additionally decorated with ornaments, and curtains can be drawn in the window openings. The result will be different if all the details are done in the same style. That is, both windows and doors should be drawn in a similar manner.
Draw many flags on the pointed tops of the roofs. How to draw a palace so that it is clear who lives in it? Everything is very simple! At your discretion, you can depict not only flags fluttering in the wind, but also, for example, stars and the moon (and then you will get the castle of an astrologer or a wizard). Or maybe it will be snowflakes or ice crystals? It will turn out very similar to the house of the snow queen.
Shutdown
On final stage all works are deleted auxiliary lines, the background is drawn - the area in which the castle is located. It could be the green hills and garden surrounding the palace. Or is your building located on a high cliff, at the very edge of an abyss, against the backdrop of an azure sky? It all depends on your imagination. The last part of the work is adding tone - for this you can use colored pencils, watercolors or gouache paints or
Well, you know how to draw a palace, which will be a wonderful decoration for puppet shows or will make dreams of a fairy tale come true.
Theater is the oldest of different types arts Theater originated a very long time ago. According to historical data, performances were already given in theaters Ancient Greece And Ancient Rome. Back then, all the roles on stage were played by men. Later, theaters developed. And now, despite the widespread use of the Internet, the theater still exists and continues to operate. After all, you can’t compare the performance of actors seen live with anything. This smell of the wings, the stage, the very atmosphere of the theater is something magical and bewitching.
The actors put their whole soul into their performance, they live the lives of their characters on stage, give us their emotions, and we empathize with them. If you have the opportunity to go to the theater at least sometimes, do not deny yourself this pleasure. Be sure to go and as often as possible.
The theater has long had its own unspoken symbols. And one of them are images of theatrical masks. They personify different theatrical plots: comedy and tragedy. Masks appeared in ancient times. The actors put them on their faces and, with the help of masks, conveyed the character of their character. Then masks could depict human faces, animal faces, or even any invented characters. But it is usually believed that two masks: the tragic and the comic represent the theater. We will draw here step by step theatrical masks. Stage 1. Draw auxiliary lines (framework) of our future image. We draw vertical lines and then intersect them with perpendiculars. And on the second mask we will also draw the angle of the line. Then we begin to smoothly outline the contours of the faces of the masks.
Stage 2. Draw slits for the eyes and mouth along the lines. The eyes are oval, the mouth of the masks differs in shape, since one mask should be laughing, the other crying. Next, we add eyebrow lines on top of the eyes along the horizontal lines and noses along the vertical lines.
Stage 3. To the image of the laughing mask we will add a few more features that look like wrinkles from laughter. Then on both masks we will add features above the eyes, at the nose and at the corners of the mouth.
Stage 4. There are still some lines left to draw. These are spots on the cheeks and chin.
Stage 5. Our masks are ready. We didn't color them too brightly. It turns out that they seem to have just been made and have not yet been completely painted for any plot. Preparations, so to speak. But you still need to tint them. Ehto light colors depicting shadow and light areas.
