Black and white art online. How to Make Art from a Photo in Adobe Photoshop
Hello everyone, in this tutorial I will tell you how to make such artWhat is needed:
1)Adobe Photoshop cs6, you can download
2) Straight arms
3) Photo with which we will work
Let's start:
Step one: photo selection. The photo must be in a minimum resolution of 800x600 so that it can be processed efficiently. I will use this photo
Step two: create a new transparent layer Shift+Ctrl+N
Step three: Let's start outlining the face. Select a regular brush: size 1, hardness 100%, color black.
We put a dot in the place from which we begin to trace.
Hold SHIFT and place a second point; a straight line will be drawn between these points, so make sure that the line follows the contour of the place that we are tracing. It should look like this:
Step four: Let's start filling.
Select the FILL tool, select the desired part of the photo, press ALT, the eyedropper appears, then fill the selected area. It should look like this:
Decide for yourself whether to outline background objects or not, I did not do this.
Step five: Here comes the most Difficult choice how will you draw a face if you want maximum approximation to real photo, then go back to step 3 and outline the lips and nose.
Or you can make parts of the face using simple lines, I will do this. It should look like this: (I changed the skin color because I didn’t like it).
Now the choice is yours, you can leave the black lines, or you can paint them over and emphasize the chin more dark color skin.
Our art is ready, save the picture and show it off to your friends.
I didn’t try too hard because I was tired.
I hope the article was useful;D
Everyone knows that Adobe Photoshop allows you to create anything you want with photographs and images. Most users resort to using Photoshop only when there is a need to do retouching, correct the skin and face. However, you can also create very interesting and unusual effects for photos. There are many effects and it is impossible to talk about each one. In this article we will figure out how to make art from a photo in Photoshop. Let's get started. Go!
Interesting effects in action
For example, let's take a photograph of a famous actor
The first step is to choose the photo you will work with. Next, create a duplicate layer. Please note that it is always better to work with the duplicate rather than the image itself. Now go to the “Filter” menu and in the list that appears, click “Blur”. Select "Smart blur". In the window that opens, you need to set the desired parameters. In the "Quality" section, select "High" and in the "Mode" section, select "Edge Only". Move the Radius and Threshold sliders to get the desired result. Choose values close to 8 for Radius and 48 for Threshold.
We set the parameters close to what is shown in the example
The next step is to invert the resulting image. To do this, use the keyboard shortcut Ctrl+I. Now you can turn off the current layer. Above the layer with original photo create a new one and fill it with white.
Next, create horizontal lines in a separate document. Use the Shift+Ctrl+Alt key combination by pressing the right arrow to copy the line. Copy about 20 or more of them. Combine all the lines together, and then rotate them at an angle of 45 degrees.
The next step is to select a square 100x100 pixels in size and cut out a fragment with lines so that the result is a square completely filled with lines.
Now you need to exactly repeat the last two steps only with the lines inclined in the opposite direction.
Go back to the main document and duplicate the layer, then place it above the white layer. Open the “Image” menu, click “Adjustments” in the pop-up window. Then select Threshold. In the corresponding box, set the level value. It should be close to 118. In principle, you can stop at this step, but let's go further and use the prepared blanks with lines.
Isohelium image correction
Go to the layer style and check the box for “Pattern Overlay”. In the “Blend Mode” section, set it to “Lighteen”. Next, select the striped pattern you created earlier.
The main effect is achieved precisely by the combination of inclined lines
Now we need to convert the layer into a smart object. Right-click on the layer and select “Convert to smart Object”. Set the layer's blending mode to "Multiply".
Create a new duplicate of the original layer, moving it to the top. Apply isohelium to it, overlay the layer and convert it to a smart object similar to the previous steps, only now set the isohelium level to 100 instead of 118, and use a reverse stripe pattern when overlaying the layer. Turn on the layer that you turned off at the very beginning. Ready.
After this you can add some texture. Apply it to the resulting image by overlay, selecting the “Multiply” mode. Adjust the transparency level and your art is ready.
Now let's look at how to make pop art in Photoshop. This is a fairly popular effect that is often used by social network users.
Original photo for pop art
After selecting the photo you want, make a duplicate layer. Open the Filter menu, then go to Artistic and select Cutout. In the parameters window, move the sliders “Number of Levels”, “Edge Simplicity”, “Edge Fidelity” so as to get the desired result.
Move the sliders as desired
The next step is to create another duplicate layer, but this time the one to which you applied the filter. Go to the Filter Gallery, this can be done through the “Filter” menu. Then open the "Sketch" section. There you will find the “Halftone Pattern”, which is exactly what you need. On the right, in the settings block, set “Dot” in the “Pattern Type” item and move the sliders to get the desired look.
Dot size and contrast may vary
Next, set the blending mode to “Overlay”. You can stop at this stage if you are satisfied with the resulting photo. You can also select the original layer, duplicate it and place it above all the others, and then adjust the transparency value based on your own preferences. Ready.
Simple manipulations - new pop art is ready
This Photoshop lesson will introduce you to very well-known destination V fine arts like Pop Art.
Next to pop art is the name of Andy Warhol, who was an artist, a photographer, a film director, and a publisher.
It was he who, in the mid-20th century, created unique collage paintings from completely unexpected things - from images tin cans to such glamorous collages with Elvis Presley and Marilyn Monroe.
This style became incredibly popular at the time, resulting in countless imitations of this artist's work.
Because creating pictures in the Pop Art style is very simple, especially if you know Photoshop.
The technique we want to tell you about is that first a black and white stencil is made based on the original drawing. And then parts of this drawing are painted in very bright colors in different variations.
Any portrait can be turned into a pop art drawing, but a photo with clear boundaries is especially suitable for this.
It is advisable that the person in the photo looks directly into the camera lens.
1. Below is the process of cutting out a boy from his original background and placing him on a new one. It is important for us that the boy and the background are placed on different layers.
To quickly remove plain background use the tool - Magic wand, if the background is multi-colored, then take the Pen tool
2. Most likely, you have already noticed that pop art images are famous for their very high contrast.
The following steps will remove a lot small parts, so you don't have to be too careful as you work.
Place the bright background layer directly below the working layer (with the boy).
3. To make a high-contrast image, first make sure you are on the cutout boy layer and select Image > Adjustment > Threshold.
Adjust the slider so that the image contains enough shadows that all the main shapes and features are preserved.
4. Roughly select each part of the image that you will color later.
Press Alt + Ctrl + J to copy each part to a separate layer. Give each new layer a name. Change the blending mode of each layer to Multiply, and click OK.
5. Activate each layer in the Layers palette one by one.
For each, press Ctrl + click on the layer window and go to the menu Edit> Fill.
Click on the Use line, a window will appear where you can select the Color line. Thanks to this, a palette of colors will appear, where you can choose a bright one to suit your taste. saturated color to paint over some part of the image.
6. In the “Layer Style” window (Layer Style, appears if you double-click on the layer), select the Color Overlay style (color fill) and change the blending mode there to Color. Select bright color and click OK.
7. When you repeat these steps for each individual section of the image, you will see that in front of you is a real masterpiece in the pop art style.
8. Save this file in Photoshop format (.psd) and make copies of the layers where you did the coloring. In your layers panel, each area is painted a certain color. Now you can very easily change the color of the area using the Hue/Saturation function (Ctrl + U).
In the end, you can combine all the options into one large image.
This combination various options of the same image is very typical of the style of 60s Pop Art.
But still, it offers you a fairly extensive online image editing program, perhaps the simplest, but very functional. Combining traditional simple editing features and filters with advanced tools such as smart recoloring (Advanced tab), color curve, and more, FotoFlex editor allows users to create, adjust, enhance and ultimately transform photos and images from virtually anywhere with access. in Internet. The editor also offers a wide range of enhancements, fonts and special effects.
FotoFlex also has functions such as rotation, size measurement and cropping, rotation, drawing, erasing, filling. Once you upload a photo for editing, you will see a simple interface on the basic tab: Auto fix, Red eye fix, Crop, Resize. The program has a wide range of effects, such as blurred contours, black and white photography, comic book effect, art, stencil and many others.
Unlike the program, this editor is simplified and has some effects, using which you do not need to be professionals in photo editing.
One-click effects
This photo shows how you can make a photo effect in one click. different styles and in pop art style. And these are just two of more than 20 effects - pixelation, night vision, painting, blur outlines, old photo, saturation and much more!
Insert face
This function is located in the Design tab, using it you can insert your face or the face of your friend into a hole in another photo.
In one click you can “paint” your face onto another photo from the offered assortment (bodybuilder, dollar bill and several celebrity options). You can change the size and angle of the face to fit the new photo. This option contains few templates to use, but it is surprisingly easy to use!
Let's look at how to fix red eyes or change eye color using this photo editor
1. First you need to add a photo in which we will remove red eyes. Click on the Add Image button and upload a photo.
Navigate to the folder containing the photo you would like to edit and double-click on it. The photo will be loaded into FotoFlexer and will be available for editing.
2. Go to the "Basic" tab at the top of the screen, and then click the "Fix Red Eye" button. 
If you want to know how to change your eye color, then skip to step 4.
3. Once you have clicked the "Fix Red Eye" button, you will simply need to click on the center of each eye and click the "Done" button.
The photo shows how the eyes will look after using this function. Just a couple of clicks and no more red eyes!
4. Upload the photo you want and go to the Advanced tab at the top right of the editor and click the Custom Recolor button.
5.
A window like this will appear. Zoom in on the photo by moving the slider to the right to make it easier to change the color. Under the View option, click on the arrows and select “Processed” and set the brush size you need and the color you want. There is no need to change anything else.
Graphic editors nowadays are capable of a lot. Using them, you can change a photo by removing anything from it or adding anyone you want. By using graphic editor you can make art from regular photography, and this article will talk about how to make art from a photo in Photoshop.
First, you need to download the program from the link above and install it, which this article will help you with.
Preparing the photo
After installation, you need to open the photo you need. To do this, you need to open the “File” submenu and click on the “Open” button, after which, in the window that appears, you need to select the photo you need.
After this you need to get rid of the background. To do this, create a duplicate layer by dragging the main background onto the “Create a new layer” icon, and fill the main background with white using the “Fill” tool.
Now erase the background using the Eraser tool and apply a layer mask by right-clicking on the mask.
Correction
Once the image is ready, it’s time to apply the correction, but before that, create a duplicate of the finished layer by dragging it onto the “Create New Layer” icon. Make the new layer invisible by clicking on the eye next to it.
Now select the visible layer and go to “Image-Adjustments-Threshold”. In the window that appears, set the black and white ratio that best suits the image.
Now remove the invisibility from the copy, and set the opacity to 60%.
Now go back to “Image-Adjustments-Threshold” and add shadows.
Next, you need to merge the layers by selecting them and pressing the “Ctrl+E” key combination. Then we paint the background in the color of the shadow (we roughly match it). And after that we combine the background and the remaining layer. You can also use an eraser to erase unnecessary parts or add black to the parts of the image you need.
Now you need to add color to the image. To do this, you need to open the gradient map, which is located in the drop-down list of the button for creating a new adjustment layer.
By clicking on the color strip, we open the color selection window and select a three-color set there. Afterwards, for each square we select a color.
That’s it, your pop art portrait is ready, you can save it in the format you need by pressing the key combination “Ctrl+Shift+S”.
