How to make a straight line. How to quickly draw a straight and beautiful line in Photoshop

Good day everyone, my Dear friends and guests of my blog. Today I would like to tell you how to draw a straight line in Photoshop or its online versions. Of course, the segment looks much neater than something drawn with a trembling hand. Oh, this trembling hand)). Well, okay, let's not pull the cat by the rubber band. Go!

First, let's look at the simplest methods drawing.

Draw lines horizontally and vertically

The easiest way to draw straight line- take any drawing tool (pencil or brush), hold down the key SHIFT and lead in the direction you need (up down or left and right). Rest assured while you hold shift, there will be no trembling hand, everything will be recorded.

Drawing lines at an angle

If you want to draw a line at an angle, select the brush (pencil) tool from the toolbar in the same way, and then put a dot in the place where you want the beginning to be.

Now, hold down the key SHIFT and click in the place where the end should be. After this, the line will be instantly drawn automatically from the start to the end point.

In addition, you can make a real broken line. To do this, you just need to poke in the places where it should break. Just remember to do this with the Shift key held down.

Drawing straight lines using guides

Just yesterday I published an article about that, and today this topic will also be very useful to us. To do this, pull out the guides from the ruler area with the mouse button held down and place them in the places where you need them, and then take the pencil again and draw along it. Thanks to its binding property, it will magnetize your drawing to itself.

Only, unlike the previous method, you will not be able to move away to a long distance, since after all, the guide really acts like a magnet. As long as you draw close, the drawing is attracted, and as soon as you move away, your trembling hand comes into play again.

Figures

And of course, we must not forget about the main tool, namely the figure of the same name. In order to draw a straight line in Photoshop this way, you need to go to the “Shapes” tool and select the “Line” tool there.

Before you start drawing, go to the tool settings above and see what you can customize here:

Now just left-click anywhere on the sheet, after which you will see the beginning. It will be as if nailed down, and at this time you will be able to decide where the end will be. You will end up with what we expected. It is noteworthy that with this tool you can draw lines at an angle, and not just vertically or horizontally.

Drawing lines with the Pen tool

Previously, we used as one of the selection tools. But of course, this is not all of his abilities, and now we will draw a straight line using him.

Now everything is displayed as it should, and you can make not only straight lines, but also broken ones. So this once again proves that Photoshop is just a versatile program and the same tool can perform different functions for different jobs.

Rectangular Marquee Tool

Enough extraordinary way draw a straight line, but nevertheless, some Photoshop users really like to use it.

As a result, we got a black stripe that you can turn into a line. To do this, just go to the transformation mode ( CTRL+T) and simply increase or decrease the length and width by left-clicking on the edges.

Well, if you want it to be at an angle, then use the same transformation to turn it over. To do this, place the mouse cursor next to the corners of the selection until the cursor changes to a curved arrow.

How to draw a line in Photoshop online

I know that not everyone is ready to install a cumbersome program on their computer, so we will try to make do with a special service. In fact, it’s not difficult to draw a straight or broken line in Photoshop online, simply because this version is highly neutered, there are very few ways there.

The first method is that you will need to select the Brush or Pencil tool and poke anywhere on the canvas to create a starting point. Now hold down the key SHIFT and poke the one where you would like to see end point. After this you have a straight line. This method is similar to what we did in the program.

The second method is that we select the Draw tool, assign any color (or leave the default one), hold down the left mouse button and start drawing a black rectangle. You yourself can control how thick or long it will be.

But it is important to remember that there is no Transform tool in Photoshop online, so the segment you draw cannot be changed, enlarged, reduced or rotated at an angle.

Well, that's basically all I wanted to say. I hope that now you understand how to draw a straight line in Photoshop in different ways and without any effort.

Well, if you don’t know Photoshop or don’t know it well, then I recommend that you watch these wonderful video tutorials, where they will tell you and show you from A to Z how to work in Photoshop. All lessons are told in simple human language and with great interest. If you don't mess around, you can learn Photoshop in just a couple of weeks. Highly recommend.

Well, this is where I end my lesson, I hope that you liked my article today. Don't forget to subscribe to my blog and share the article materials on in social networks. I'm waiting for you again. Good luck to you. Bye bye!

Best regards, Dmitry Kostin.

How to draw a straight line in Photoshop?

It's not difficult to draw a straight line in Photoshop.

You can simply hold down the Shift key while taking a pencil or brush. Then the line will be smooth with a fixed point.

Or using a rectangular area if a thick line is required.

You put a point with a pencil without pressing Shift, then press Shift and put a second point. A straight line will appear between these two points.

I recently needed to do this, I couldn’t find the function, but I figured out to hold down the Shift key and just draw with a pencil (or brush). A straight line is drawn, but only either strictly horizontally or vertically (no obliquely). Although, in principle, if you need it obliquely, you can rotate the line.

PS. I'm still an amateur in Photoshop, so maybe there are some special tools for drawing a straight line that I'm not aware of

To draw a line, you need to select a tool in Photoshop from the very top called Rectangular Marquee and draw a line of the desired thickness and length. Next, you need to paint over it with tools like Gradient, Pencil or Fill...

The hotkey U at the top of the toolbar will be a line.

You select a brush, color, put a point where you want to start the line, then press Shift and without releasing it, put a point where you want to finish the line.

2 days before entering the program, refrain from drinking alcoholic beverages and intoxicating drugs.

• • Select the brush tool.
  • We set it up in such a way that any dynamics of shape and size are turned off.
  • hold down Shift and draw up/down or left/right, depending on where you want to draw the line. If you draw in a new layer, you can then rotate it to the desired angle with the transform tool - Ctrl+T

In order to draw a straight line in Photoshop, we just need to use a pencil in this program to press the left click and without releasing the Shift button. After this, we point the mouse in the direction we need and we get a straight line.

There is nothing difficult here)

I wish you good luck with your drawing in Photoshop.

As I remember, you can draw a straight line in Photoshop by pressing and holding the Shift key and at the same time selecting a brush or pencil and then drawing your straight line, but you can draw either vertically or horizontally..

For example, when I need to draw a straight line in Photoshop, I simply take a pencil or brush in the program, then put a dot in the required place and, without releasing it, press Shift and draw my straight line in the required direction.

• How to draw a line in Photoshop

  If you take the Rectangular Marquee Tool, you can easily make a thin horizontal selection in the form of a line, which can be filled with some color (Edit -> Fill...).

  There are quite a lot on BV various issues by Photoshop. For example:

  • How to whiten teeth in Photoshop?

Draw a straight line in the program Adobe Photoshop It's not difficult at all. First, you need to choose a brush or pencil (if you need thin line, That better pencil, if it is thick with a shaded border, then select the appropriate brush), set the desired thickness and color. And then, holding down the Shift key, draw a line. It will turn out perfectly smooth.

Method number 1. Circle.

To begin, draw a regular circle using the tool oval area. With this tool it is easy to draw a circle in this way: having selected the tool, change the tool style from "Ordinary" on "Specified size" and simply set the same size for the height and width of the circle. Or you can do all the operations not with a circle, but with an ellipse. Then just click on the sheet with the mouse, and you will have a selected area of ​​a given size. After that, right-click on the selected area and select the item from the menu “Stroke”. In the window that appears, select the color and size of the brush. Next, just press on your keyboard "Ctrl" + "D" and your selection will disappear.

Now create another layer on top of the circle. And in a new layer draw a circle, but without a stroke.

Now just fill the inside of the selection with the same color as the background and press the keys "Ctrl" + "D" to remove the selection.

Method number 2. Rectangle.

To begin, draw a rectangular area, outline it, but do not remove the selection yet (how to do this is described in method No. 1).

Then go to menu “Filter” (Filter) – “Plasticity” (liquify). Or press the keyboard shortcut "Shift" + "Ctrl" + "X".

And bend your figure, then press OK. After that, all that remains is to deselect and use the eraser to remove unnecessary details.

Method No. 3. Feather.

Perhaps the easiest way is a tool "Feather". Many people do not understand what this tool is for only because they do not know how to use it. Everything is simple here. Selecting a tool "Feather", first give it a style "Paths". Then simply mark a dot on the sheet with this tool. Release the mouse button and place a second point on the other side, but this time, without releasing the mouse button, drag and you will see how the outline of a curved line appears.

After this, all that remains is to trace the outline, as in the first method with a circle, and also by right-clicking on the outline, select the item "Delete outline".

This method is very convenient for drawing wavy lines.

It is more convenient to draw wavy lines with an anchor pen. To do this, you need to use a pen to place two dots on the page, which will automatically be connected by a line. And then, pulling the middle of this line, use the same pen to bend the line.

Good day, dear readers of my blog. It would seem, what does it cost to draw a straight line in Photoshop? Hold down Shift and there you go. Nevertheless, this can be done in as many as three ways. Everyone's result will be different.

In this article you will learn three ways to draw a straight line in Photoshop. Which filter to use to create a wave. How to do this with the help of another interesting instrument. I'll show you how to achieve a dotted line and draw under certain angle.

A lot of information awaits you. Shall we get started?

Line Tool

First, I'll show you how to use a tool that's designed to create straight lines. In this place you can have a rectangle, oval, ellipse or polygon. Just hold down the left mouse button for a few seconds to open a menu with additional tools.

First things first. One of the most important parameters– thickness. Thanks to the line, you can even draw rectangles. You just need to make it fatter.

Next comes “Fill” and “Stroke”. Click on the color block to the left of the inscriptions and select a shade. If you want to make a stroke, enter its width. Now, my screenshot shows the option without it. The no color icon looks like this. Gray line crossed out in red.

You can see the settings and the result in this screenshot. It's not very visible, but the thickness here is 30 pixels. On big picture 30 pixels may look like a modest stripe. Everything needs to be adjusted to your own dimensions.

This is what the line will look like if you select red for the stroke color.

The next button will allow you to create a dotted stroke.

If you reduce the thickness and remove the fill, you will just get a dotted line.

Here you can align the stroke to the inner edge, outer edge, or center of your outline.

And round the corners. True, it will not be so noticeable.

If you press Shift while you're drawing a line, Photoshop will automatically create a straight line. Horizontal or vertical. Depending on where you are taking her.

If you need a line at a certain angle, then the easiest way is to look at what the information window shows and adjust it manually, pointing it in a certain direction.

Well, now I’ll show you another one.

Brush Tool

I drew these rectangles using lines drawn with a brush.

Choose the type and size that suits your brush line.

Place a dot at the expected beginning of the line, hold down Shift and left-click where the strip should end.

There are two lines in front of you. The yellow one was painted using the Line tool, and the purple one was painted with a brush.

How to make a wave

No matter what tool you used, do wavy line The easiest way is to use a filter. Go to this category, find “Distortion” and select “Wave”.

Based on the preview picture, you will quickly understand what's what and how to set it up. The amplitude should be approximately the same. If it doesn’t work, you can just click on “Randomize” until a suitable one appears.

The last applied filter is always quickly accessible. I apply it to the layer with yellow stripe, drawn by the tool.

This is the result I got. As you can see, it is different.

Pen Tool

To be honest, I still can’t use a pen professionally. I know that you can draw anything with it: smoothly, quickly, fun and cool, but it takes me a lot of time and the result is not always at the level I expected. And yet I can even draw straight lines with a pen. It's worse with curves, but I'll try. I select “Feather”.

I put a dot, then a second one. While I haven't released the mouse button, I adjust the smoothness.

I do the same thing with each new point.

After all the manipulations are completed, right-click and select “Stroke outline” from the menu that appears.

You can choose several tools: pencil, brush, stamp, pattern, and so on. Now let this one be a brush.

I press the right mouse button again and select “Delete outline”.

This is the result I got.

Well, don’t forget that you can always use your collage making skills. Read the article about how to take a line from any picture and insert it into your image.

If you want to learn how to professionally use the pen and other tools found in Photoshop. I can offer you a course " Photoshop for beginners in video format ».

Lessons created by professionals will teach you everything you need to know about this program. You will save a lot of time searching for answers to this or that question. Ideas on how to complete the task will spontaneously appear in your head.

By the way, do you know how to make sure that you always have interesting needs related to Photoshop? This could take your relationship with this program to the next level. All you need is to be passionate about web design. People of this profession never sit idle. There are always clients, projects and new tasks.

There is a job for everyone, and you can do what you really like and bring good money. Read the article about or. Stop inventing tasks for yourself, let someone else pay money for your time.

Don't know where to start? Take the course Commercial Web Design Basics " Try a few free lessons, this will help you understand yourself and understand whether you are ready to explore new horizons.

OK it's all over Now. It's up to you. Decide when you are ready and start conquering new heights. If you liked this article, subscribe to the newsletter and take one step closer to your cherished goal every day.

Learn as much as you can about the Internet, write your success story, stop sitting around waiting. Take action. Your dream is realized by others every day. Today they are doing what you have been wanting for so long. Do they think about preparedness? The right moment is right now. Don't miss it. You have the strength to do this.

I wish you good luck. Until next time.

Of course, one of the simplest and most frequently used elements in drawing is the line. Adobe program Photoshop is no exception. Especially if you plan to seriously study the field of website design.

One of the advantages of the Photoshop program is the interchangeability of actions. You can achieve the same result with many different different ways. Now we will study several options for command sequences with which we can make a line in Photoshop.

Let's start by creating a new document. A document of 1000 by 1000 pixels is quite suitable for us. Detailed description Creating a new document in Photoshop can be found here.

Let's start with the line tool. We will find it on the tank panel.

Now let's set the characteristics of our future line.

Let's set the line thickness. I decided that a thickness of 4 pixels would suit me. If you wish, you can choose its style. I'll make do with the simplest ones.

Let's decide on the color. You will also find the primary color selection icon on the sidebar. By clicking, a window for choosing a color is called up.

Well, that's it now! Let's draw. Click on the work area and draw a line with the mouse.

Now our line is a smart object. You can turn it into a regular layer in the layers window using the “rasterize layer” command.

The line is ready. As you can see, drawing a straight line in Photoshop is very easy. We have discussed an elementary method, which, despite its convenience, has a number of limitations. Let's take the second one apart and draw a line using the pen tool.

It should be noted that in in this case It’s worth changing the settings of your brush or pencil to the appropriate ones in advance, because your line will repeat these outlines. Therefore, let's set up the pencil tool together. Select it in the sidebar. And click on the work area.

Set the following pencil settings. How to choose a color is mentioned above.

In the sidebar, look for the pen tool.

We make two clicks on the work area. It should be noted that if you want to make the line smooth and strictly horizontal or vertical, hold down the shift key while clicking.

Click on the line with the left key. In the drop-down list, select the “outline outline” command.

We trace the outline and click again with the left mouse button. Select the “delete contour” command.

So, the line is ready! In just five minutes we learned two ways to draw a straight line in Photoshop.