What can you draw on the birthday theme? What and how to draw for a birthday: the best ideas with photos

This popular way of starting circular crochet is called no matter what: amigurumi ring, amigurumi loop, magic ring (tracing paper with English name"magic ring"), sliding ring.

This technique is very popular and necessary, especially if your knitting starts with a small number of stitches in a circle.

Well, if you like to knit small toys - amigurumi crochet, then you are of course faced with the need knit an amigurumi ring.

Knitting amigurumi rings - important stage, which should not be neglected, because its implementation depends appearance products. And since amigurumi is a miniature knitted toy in its essence, accuracy is a mandatory element to obtain a good result.

Main condition - crochet amigurumi ring must be tightened, this is the only way the initial row will look professional.

How to learn to knit a magic ring or amigurumi ring?

Learn to knit crochet ring with today's lessons it couldn't be easier. See our selection.

2. Video master class from Panda's WOW Shop DIY on knitting a “magic ring” in different ways:

3. Video MK from the channel "Crochet" - "Amigurumi Loop. Magic ring Amigurumi."

The art of amigurumi originated in Japan, but is gaining popularity in Russia every year. More and more housewives are interested in such toys. They are based on one interesting “figure” in knitting. Let's consider detailed master class about how to knit a ring yourself using the amigurumi technique (that’s what this blank is called, the name comes from the toys that will later be obtained in the process).
By the way, why not make a regular ring, as, for example, it is done in napkins? But, if you remember, napkins usually have a hole. But is it normal if the toy (not by design, of course) has a hole in it from which the filler will come out? Of course not. An amigurumi ring is a ring without a hole. This is where its feature and advantage lies.

Stages of knitting an amigurumi ring with your own hands step by step

Let's look at the whole process step by step:

The amigurumi ring is ready! Video materials are also attached at the end of the article for greater clarity.

There are many more options. And this article will demonstrate another one. This method will help the threads not to stretch or unravel at the end, as this can happen over time. Thin threads are especially susceptible to this risk.

Making a ring in two turns quickly and easily

In the first method we made a ring in one turn. The double is knitted in much the same way, but care must be taken when tightening.

Some useful information for general study of the issue

Here is another weaving method described in one of the Japanese magazines.

There are many more diagrams in various publications that can clearly show how to make this ring. You can also watch the videos that are attached after the article, maybe they will help someone understand in more detail how to make an amigurumi ring.

Please note that it is better to take thick threads, as thin ones can then unravel in the middle or become stretched. And it’s better to practice making this ring. Some people say that you should start knitting amigurumi dolls only when a person can make this ring at night without light or with eyes closed. After all, it would seem that this is just the beginning, but everything depends on it. This ring will be used more than once or twice as you knit. You will have to do it for almost every detail. Therefore, you should learn to do it efficiently, because it will be a shame when the toy suddenly starts to unravel in this ring, or the filler (sintepon, padding polyester, holofiber) starts coming out of it. Such a toy sometimes takes hours (depending on the person’s experience, the size of the toy, the number of parts).

Therefore, we wish everyone good luck in such a difficult, but terribly interesting, useful, educational, and also bringing joy (to both you and your loved ones) hobby!

A selection of videos on the topic of the article

Amigurumi toys have won the hearts of needlewomen. More and more craftswomen want to learn how to knit various figures with their own hands. However, having opened a master class on knitting toys, the question arises of how to knit a ring using the amigurumi technique correctly and quickly. You can easily find the answer to this question in this article.

The amigurumi ring is the first thing a craftswoman needs to learn in this technique. Every detail of the future toy begins with this figure. Therefore, it is extremely important to make the ring correct so that the entire toy has good view. First, let’s look at the master class “How to crochet an amigurumi ring.”

There are several methods for crocheting, it is important not to forget that each method has its own pros and cons. A beginner should try both options and find his own.

How to knit an amigurumi ring in 1 turn with patterns

Step 1: Roll the thread into a loop.

Step 2: Insert the hook into the loop and catch the working thread. Then we bring the thread through the ring. A loop is formed on the hook.

Step 3: Pull the thread through the loop. Thus, we have a knot.

This loop is not considered a stitch. Therefore, we do not take it into account when knitting further.

Step 4: We have an amigurumi ring with a tail.

Step 5: Insert the hook into the ring under the two threads (ring and tail) and pull the thread out.

Step 6: We knit the two resulting loops on the hook. We got the first single crochet.

Step 7: We knit the number of columns indicated in the selected pattern.

Step 8: Pull the tail to close the ring.

Step 9: Connect the row to the first loop using a half-stitch so that the amigurumi ring is completely closed.

This method of knitting an amigurumi ring has both advantages and disadvantages. For example, the advantage is fast execution; a ring made in this way is easy to tighten. But there is also a drawback: this method of knitting an amigurumi ring is not suitable for some types of thread, especially thin ones. Due to poor adhesion of the threads to each other, the ring may unravel. Therefore, this method is only good for wool threads.

Mastering the second method for beginners

Another technique is a 2-turn ring.

Step 1: We tie the fingers with two turns of thread. We leave the tip of the thread “from ourselves”.

Step 2: Knit a zero loop. To do this, insert a hook into a ring of two threads and pull through the working thread. Then we knit the resulting loop on the hook. Thus we have a setting.

We do not tighten it too much, so that later it will be easier to tighten the entire amigurumi ring. Make sure that the ponytail is not tightened, but remains loose.

Step 3: We knit the required number of single crochets, as in the first case.

Step 4: Tighten the ring. To do this, take the tail and begin to pull it slightly. Let's see which of the two threads of the ring begins to come together. Let go of the tail and pull this thread until the ring closes.

Step 5: We See big loop. This is the noose that was pulled. Next, pull the tip of the thread so that this loop is hidden inside.

Step 6: Both loops are hidden. You can now join the row to the first stitch to complete the amigurumi ring.

The amigurumi ring is ready!

Today, many knitting techniques are known, the most popular of all is. The technology came to us from Japan. Products produced using this technique consist of many spherical or cylindrical elements, stitched together and filled with soft filler.

Video tutorial on how to knit an amigurumi ring

Ring is one of many options for starting the first row when crocheting. The amigurumi ring compares favorably with other methods with its so-called adjustable loop, which allows you to tighten the hole in the center.

Instructions for knitting an amigurumi ring

Let's look at the process step by step.

Take the yarn and wrap it around your index finger, but leave the tip a little longer.

Using the free tip, make a loop and hold it thumb so that it doesn't fall apart.

Insert the hook into the loop, grab the working thread from index finger and pull it through the loop. The structure can easily fall apart, so always hold it with your thumb.

Grab the working thread again and pull it through the loop, i.e. make a regular air loop.

After this, insert the hook into the loop again, pick up the working thread again, pull it out and knit both loops together.

We repeat the previous point as many times as you need columns.

Hold the last column with your finger, pull the free end and tighten the ring.

To prevent the ring from falling apart, reinsert the hook into the outer loop, pull it up and insert the hook into the first stitch.

Make a connecting stitch, that is, pull the thread through all the loops at once.

The ring is ready! You have knitted an amigurumi ring!

Knitting amigurumi rings with double winding.

Sometimes the yarn is too thin. In this case, you can make an amigurumi ring with double winding. It is knitted similarly. The difference is the number of times you wrap the working thread around your index finger; instead of one, you make two turns.

Such a ring is a little more difficult to tighten, but it will definitely not fall apart. The further quality of the work depends on its accuracy, because this particular detail will be a kind of foundation for further work. The amigurimi ring will require scrupulousness and accuracy from you, so show maximum concentration. If you suddenly fail to do everything correctly right away, do not give up. Be persistent and attentive, and then you will succeed. Good luck!

Master class in Russian. I’ll tell you in detail and with pictures how to knit an amigurumi ring or how to skip it, and what you can replace it with.

Photos in good quality and high resolution (including desktop wallpapers, diagrams or other pictures) can be enlarged and downloaded, links under the corresponding images (photos).

Why skip? Some people don’t fully understand how to make this very ring; for some, the necessary thread doesn’t stretch, so a replacement may come in handy.

The first method is the most correct, used for most toys. In this method, it does not matter how many single crochets there will be in the first row.

Important! If the ring is used to replace the starting ring of a napkin, then it is not single crochets that are knitted into it, but those laid according to the napkin pattern. As, for example, with a butterfly from the starting ring, you first need to knit 4 air lifting loops, and then double crochets.

To begin our work, take a thread (a ball or skein of yarn) and prepare a suitable hook.

Wrap the thread around the index finger of your left hand (palm facing you, finger bent 90 degrees and “looking” at you) 1 time clockwise so that the torn end of the thread is behind the loop being formed and hangs to the left of the finger. I'll show you an example on a pen. taken from https://www.site