home-Tops-How to draw a ribbon in Photoshop. How to make a St. George ribbon with your own hands: from beads, on a transparent background, a brooch from a St. George ribbon

How to draw a ribbon in Photoshop. How to make a St. George ribbon with your own hands: from beads, on a transparent background, a brooch from a St. George ribbon

I have prepared a tutorial that will help you create a symbolic ribbon in Adobe Illustrator, which you can use not only in connection with the fight against AIDS, but also for any other purpose where you may need a vector ribbon.

Step 1.

Create a new document in Illustrator. Further using Rectangle Tool (M) draw a small rectangle. Now go to the menu Effects > Warp > Arch and apply the following settings:

-select Horizontal

- Bend: 79%

Section Distortion

- Horizontal: 0%

- Vertical: 12%


Step 2.

Expand your figure by going to the menu Object > Expand Appearance. Further using Selection Tool (V) narrow your figure a little. As a result, we got a loop of our ribbon.


Step 3.

Now use Pen Tool - Pen Tool(P). Starting at the top left corner of the loop, draw a ribbon shape working down to the right, maybe bending the shape a little towards the end. The form presented in the lesson consists of four nodes.


Step 4.

Copy the created form Ctrl + C > Ctrl + V to make the left side of the ribbon. Flip it vertically, to do this, select the shape, right-click and select Transform > Mirror reflection(Transform > Reflect) and in the window that opens, select Axis: Vertical


Step 5.

Use Pen Tool+ - Add Anchor Point Tool (+) to add a knot in the middle of the bottom of the right and left sides of the ribbons (see picture). Next take Tool Direct selection- Direct Selection Tool (A) and move the knots you just added inward to make teeth at the ends of the ribbon.


Step 6.

Select the top small part ribbon and open the Gradient panel, add Linear Gradient as a shape fill. I made a gradient of 3 colors, placing them at 5 points along the gradient fill line. Here are the colors used in order: #5C0404, #ED1C24, #F37359, #ED1C24, #6B2326.


Step 7

On the panel Layers move the part of the ribbon that goes from right to left above the other two shapes. Next, apply the following colors as a fill to it (in order of placement on the gradient scale): : #BE2127, #ED1C24, #F2674D, #ED1C24, #921518.

Set the Angle value to 54.7°.


Step 8

Select the second part of the ribbon and apply another one Linear Gradient of the following colors (in order of placement on the gradient scale): #BE2127, #ED1C24, #F26762, #ED1C24, #811F21, #EE3524

Set the Angle value to -24.6°.


Step 9

Group all three shapes (Ctrl + G) and select from the menu Effect > Stylize > Drop Shadow

Blend mode: Multiplication (Multiply);

Opacity: 30%;

Shift along the X axis (X Offset): 20 points;

Shift along the Y axis (Y Offset): - 3 points;

Blur: 6 points

Color: #44383B


Step 10

Draw a square to fit the artboard (Artboard) and put it in the background (Shift + Ctrl + [). Apply as fill Radial Gradient from color #F3F0E1 to color #353542. Edit the radius as you see fit.


Step 11 Changing ribbon color

If you need to make this ribbon a different color, it's very easy. Select the desired object, then go to the menu Editing > Edit Colors > Recolor Artwork (Edit > Edit Colors > Recolor Artwork). Check the box Recolor an object (Recolor Artwork) and then start changing each color individually. Try to choose similar brightness shades for replacement, i.e. Replace dark colors with dark ones, and light colors with light ones.

The St. George ribbon is as constant an attribute of military holidays as fireworks, Eternal flame, parade of troops and others. The history of the St. George's Ribbon goes back a long time. Even during the reign of the Russian Empress Catherine II, the ribbon was established as a sign of reward for valiant service and loyalty to Russia and the autocracy to Russian soldiers and officers. During the days of the Great October Revolution socialist revolution Russian Navy sailors attached the ribbon to their pea coats.

Now we attach this discreet strip of fabric to our clothes during the celebration of the great Victory Day on May 9. These days there is always a “St. George Ribbon” event, when these ribbons are handed out to passers-by on the streets so that they do not forget about our history and the war. The ribbon is a long strip of fabric made of two colors: yellow-orange and black. Let's draw it here in several stages. The drawing will not be difficult

Stage 1. Draw two straight lines under the ruler: a long vertical line and a short horizontal line. Draw an oval over horizontal line so that vertical line was its axis of symmetry. Below we outline two parallel strokes.

Stage 2. Outline an oval, forming the features of a loop, the edges of which extend forward one above the other. The edges of the ribbon should be widened. Below, with a ribbon-like figure, we show an element of the subject of our lesson.

Stage 3. In the upper part, add two lines to the image of the loop. And from below we will add the edges of the ribbon at both ends. They are uneven, cut at an angle. The result was a ribbon with three waves at the bottom.

Stage 4. Add lines in the center of the tape.

Knowing how to draw different ribbons and bows can be a very useful skill. Most often it is needed when drawing luxurious dolls and princesses. Also, without ribbons, heraldic themes are incredible - coats of arms, orders, medals, honorary diplomas and certificates. Most often, sparkling satin ribbons are depicted, tied in a bow or freely fluttering. Ribbons can be single-color or multi-color (most often, three colors are used, which carry a special symbolic meaning).

You will need

  • – drawing paper;
  • - pencil;
  • – eraser;
  • – colored pencils/paints and brush.

Instructions

1. A freely fluttering ribbon is depicted further. First, draw a wavy line - it can be arbitrary, however, you must initially have an idea of ​​​​how the ribbon will be located in your drawing. The drawn line should convey the movement of the ribbon.

2. After this, draw a second line parallel to the first, at a distance equal to the width of the ribbon. Traditionally, three-color ribbons are quite wide. Repeat the entire movement of the first line.

3. In places where the lines make turns, imitating the bends of the tape, combine the wavy lines with straight segments perpendicular to them. At the ends of the ribbon, these connecting segments may not be perpendicular, but go at an angle of 45 degrees or even be V-shaped, as the ends of ribbons are sometimes cut off.

4. Using an eraser, carefully erase the lines that are on the overlapping sections of the tape. Adjust the ends of the ribbon, giving them a small, regular bend.

5. Start drawing a ribbon tied in a bow from a knot - a rectangle, which needs to be given an uneven soft form. On the sides of the knot, draw the wings of a bow, drawn on the basis of more primitive figures - triangles, the corners of which must also be firmly rounded.

6. Draw a soft curve of the ribbon, showing the depth and volume of the wings of the bow. In the center, close to the knot, the tape is very compressed; therefore, draw radial lines extending from the knot, depicting folds. A bow can have several wings - such a bow will resemble a lush flower.

7. Below the knot, draw the hanging ends of the ribbon, which can also be straight, beveled or V-shaped. Draw the same folds as on the wings.

8. When coloring the ribbon, consider that it should have a satin sheen. You can add it with cool highlights - powerfully highlighted areas. The highlights are located on the bends of the tape, which are in the foreground.

9. The parts of the tape located behind or inside the curved areas, on the contrary, must be darkened. Shade the folds of the ribbon tied in a bow as well. Apply pencil strokes or strokes of paint in the shape of the tape, making smooth transitions from clear to dark. Leave white paper in areas of glare.

10. To color a three-color ribbon, divide it widthwise into three parts. Draw two lines along each ribbon, parallel to its top edge. When coloring, do not forget about highlights and shadows for each color, but at the same time you will preserve the integrity of each ribbon.

Making advance calculations and drawing up plans is much easier and more comfortable on paper than on the site itself. Having drawn a plan of your site, it will be easy for you to correct all possible mistakes. How should you draw a garden plot plan? There are several nuances.

You will need

  • – measuring tape (better than a tape measure),
  • – metal ruler (1.8 m),
  • – pegs,
  • – graph paper,
  • - tablet,
  • - pencils and eraser.

Instructions

1. Draft drawing Take measurements of the main elements of the site (paths, trees and bushes, garage, etc.) and write them down (no need to draw on the plan those elements that you do not need on the new site). Draw objects on the plan by simply measuring the distance from them to the boundaries of the site at right angles. If the area is not rectangular, lightly stretch the rope at right angles to its sides and take the necessary measurements. Remember that the draft drawing should be as simple as possible; only include basic measurements.

2. Intermediate version of the drawing Here you can give freedom to your imagination, easily translate all your ideas into a sketch (while being careful to maintain the scale). Trace the 1st sketch of the garden onto drawing paper or graph paper (preferred). This way you will be able to determine the length of the boundaries of your site, the sizes of all objects and the number building materials(brick, stone blocks). Draw the boundaries of the future site, the house and everything that you want to leave from the former site.

3. If the area is small, you can draw a sketch on a standard sheet of paper; if the area is large, then sketches individual parts Draw on several sheets of paper, but make an overall plan on a large sheet of graph paper. As for the scale, for small areas a scale of 1:50 is suitable; for areas of significant size, choose a scale of 1:100.

4. Before you get it final version Most likely, everyone will have to draw more than one or two sketches. Try using tracing paper, placing it on top of the main plan and drawing on it, so you can try different variants without spoiling the plan itself. Also try cutting out the main elements (keeping in mind the scale) and simply moving them according to the plan, coming up with new combinations. However, later than necessary solution will be discovered, better draw all the objects on the plan, on the contrary, the overall feeling and integrity of the sketch may be lost.

Video on the topic

If a person has the ability to draw, then it manifests itself in childhood. However, many adults, who never reach for a canvas or a brush, occasionally encounter the need to create a wavy line. What's the best way to do this?

You will need

  • pencil, example of a circle, compass, pattern, Paint program.

Instructions

1. Prepare an example; it will be much easier to use it to recreate waves on paper or fabric. In this capacity, utensils with a round base can be used, which will form the basis of the wavy line comb. In order to maintain symmetry, it is possible to draw a straight beam, and place the round workpiece with the center towards it and circle it alternately. In this case, you will get an even wave with equal ridges on both sides.

2. You can create hand-drawn pictures using wavy lines of intricate shapes with the help of patterns. It is a curved ruler that can be purchased in any office supply department. To create a wave, place the shape on the paper and trace it.

3. Take a compass. It will also help to draw a wavy line according to the same thesis as using the example. It's easy to do. Determine the center of the wave crest and place the leg of the drawing tool at this point. After this, carefully and with minimal pressure draw a circle. If it lays down according to plan, then outline the part of it that is needed to create a wave. And erase obscene strokes with an eraser.

4. To draw a wavy line in Photoshop, you really need to have basic skills in working in the program. For beginners, Paint will be much more comfortable in this regard. There the wave is drawn according to the following algorithm: On the toolbar, select the corresponding wavy line icon; Place the cursor on the screen in the place where she will take the preface from, click the left mouse button; While holding the button, move the cursor to the final point, then release; It should be straight; Visually mark 2 points on one or two sides of the line where the wave crests will be directed; Move the cursor to those places one by one and, using a single click with the left button, make a wave (there is no need to hold the button).

Video on the topic

Note!
Insert - Shapes - Lines - Curve - click where you have the bends of the line, at the end double click.

Helpful advice
Two points will connect to each other. Keep doing this until you have a W shape like the one in the picture. To draw new line, click on the Selection tool (black arrow icon), then click on the Pen tool again. Closing a Path. To close the path, click on starting point. Let's draw Wavy Line. Click on the line and drag to make the line curved. Changing Path Directions.

Video on the topic

An integral attribute of May 9 are carnations, ceremonial flags and, of course, the St. George Ribbon. It is distributed completely free of charge by members of automobile communities or volunteers, and the orange-yellow symbol of victory is also sold in stalls, markets and local supermarkets. According to many surveys, the majority of residents Russian state they don’t know where the St. George Ribbon came from and what it means. The history of this symbol goes far back to the roots of the formation of the state and the Russian Army, which we will talk about today in our article.

The St. George ribbon appeared long before such an event as the Great Patriotic War (WWII) of 1941, with which we associate the Great Victory Day - May 9, on which it is customary to wear a ribbon.

The orange-yellow symbol is pinned onto clothing, worn as a patch, or used as decoration on vehicles during the May holidays. It is at this time that Victory Day falls. People who wear such a ribbon keep the memory of fallen and surviving soldiers Patriotic War. In fact, the St. George Ribbon was a valuable reward for participation in hostilities, which took place before 1941. Therefore, it is worth taking into account the earlier merits of soldiers.

Over time, the St. George Ribbon has undergone changes. Now it looks like a brooch, but previously it was worn as a separate award over the shoulder. The length of the tape has become shorter and the width much narrower, but the color still remains yellow and black. This color belongs to Russian coat of arms, which depicts a black eagle on a gold background. More detailed history occurrences will be discussed below.

History of the St. George Ribbon

George the Victorious or Saint George became the progenitor of the St. George ribbon. A silk ribbon with two-color stripes was named in his honor, which began to be awarded to combatants from the time of Catherine II.

The official decree was issued on November 26, 1769. An entry was made into the state statute that from this date (11/26/1769) an award was established - the Order of St. George. He relied on the officers of the Russian Army for valor and courage in battles for the fatherland.

The order had 4 degrees and was awarded depending on the degree of feat. At the same time, it was customary to wear orders of all degrees on silk ribbons, called the St. George Ribbon. This is where the name of the ribbon came from, which was exclusively associated with the award order.

What do the colors of the St. George's ribbon mean?

St. George's ribbon can be made from various materials, but the colors on it always remain the same. The Victory symbol is painted in yellow and black stripes. Yellow and black colors were taken as the basis for the St. George Ribbon for a reason. In 1833, in his writings, Count Litta wrote that the colors of the order implied the color of gunpowder (black) and the flame of fire (yellow).

1833 Chief Chamberlain Count Litta: “The immortal legislator who founded this order believed that its ribbon connects the color of gunpowder and the color of fire.”

However, according to historians, black and yellow mean the colors of the coat of arms that were approved in the state. Moreover, if you look closely at the paintings of those times, you will notice that the yellow color is sometimes replaced by orange. And one more opinion of experts, which is confirmed: yellow and black colors were present on the family estate of the Askanievs, from which Catherine II came.

Beautiful St. George ribbons, photo 3 options

How to make a St. George ribbon with your own hands, step-by-step instructions

Get ready for May 9th by making the St. George Ribbon yourself. This is quite simple to do, buy several colored ribbons for decoration of the Victory symbol, get that same ribbon at the distribution points in your city or buy it in a store and set aside 30 minutes of time to make it. Below we will look at several options on how to make the St. George Ribbon yourself.

St. George's ribbon made of satin ribbons, step by step with photos

To make the St. George Ribbon you need:

  • strip of St. George's ribbon 20-25 cm;
  • satin ribbon white(width 2 cm) - 12 cm;
  • satin ribbon blue color(width 2 cm) - 12 cm;
  • red satin ribbon (width 2 cm) - 12 cm;
  • glue gun;
  • glue sticks;
  • matches;
  • tweezers;
  • scissors.

In the example with the photo we will tell you how to do St. George's ribbon with your own hands. In the meantime, heat up your glue gun and set the two-color tape aside.

Cut red, blue and white ribbons into squares 2 cm long. From the available length you should get 6 pieces of each color. We need to make decorations for the St. George ribbon on each side of the brooch. To do this, we need to build kanzashi petals. Each decoration requires 3 colored squares of different colors.

Take 1 square of satin. Bend it in half and hold it with tweezers.

Now you need to bend the triangle in half. Hold the tweezers at the base. A petal begins to appear.

Fold it in half again. Use a match to singe the exposed edges of the fabric.

Be careful not to let the fabric stick together or burn black.

One petal is ready. Follow the same pattern for the remaining petals.

From the received parts it is necessary to form a tricolor flag. Connect the white pieces in one line.

Glue blue petals on top of the white side using a glue gun. Insert the first blue piece between the first and second white petal.

Shape them like a brooch.

Do the same with the red petals.

After the red petals are glued, the first branch of the tricolor is ready. Do the same with the petals for the second branch. Now take St. George Ribbon and form a buttonhole out of it, as shown in the photo. Secure the edges with glue. Place tricolor branches on the sides of the ribbon and also secure them with a gun. Now the last step remains. To keep the St. George's ribbon on your clothes, attach a pin to it.

St. George ribbon on a transparent background, step by step with photo

St. George Ribbon zooming in May Day Victory becomes an omnipresent symbol. It is used not only in festive attire for adults and children, but is also used to decorate websites, blogs, and personal photographs.

Ribbon clipart is usually placed a few days before and after the Victory Day. Accordingly, advanced users prepare in advance and download St. George’s symbols. We invite you to use our selection.

St. George's ribbon on transparent background- another selection of clipart.

St. George's ribbon made of beads, photo 3 options

Pattern of St. George's ribbon with beads

The St. George Ribbon is a fairly simple exhibit for beading. Even a novice master can start it. Stock up on orange (yellow) and black beads and fishing line. If you want the tape to be more flexible, use nylon thread instead of fishing line.

From the resulting diagram we get this nice St. George’s ribbon.

How to make 9 from the St. George ribbon, details with photos

Symbol of Victory - St. George's ribbon is usually tied to accessories or attached to clothing. However, it can be folded in different ways. Some people like to wear the ribbon like a bow, others like a loop, and some even fold it in the shape of the number 9. The finished number can be decorated at your discretion. Take a blank - St. George's ribbon and measure 15-20 cm from it. This length will be enough to make a brooch.

Lay out the resulting length in the shape of a loop.

You will get 2 tails of ribbon, carefully cut the right one with scissors. If the ribbon is silk, singe it so that it does not “creep”. Secure it with threads, a stapler or glue. Now you can decorate the resulting number as you wish.

St. George's Ribbon Kanzashi, master class

We offer another master class plot with a visual demonstration of the steps for making the St. George Ribbon. The video explains in detail what materials need to be used, the stages of the composition and, finally, a few secrets from the master.

Do-it-yourself brooch from St. George's ribbon, details with photo

The ribbon brooch appeared on sale by local craftsmen and market stalls relatively recently, but during this time it has gained great popularity. In order not to spend money on an original decoration, we will tell you how to make a brooch from the St. George ribbon with your own hands.

To make a brooch you will need:

  • St. George ribbon - 30 cm;
  • Satin ribbon orange color width 5 cm - length 35;
  • Black satin ribbon width 5 cm - length 35 cm;
  • Narrow satin white ribbon 20 cm;
  • Glue gun;
  • Cartridges;
  • Decorations;
  • Scissors;
  • Lighter.

Cut the orange and black ribbon into squares. There should be 7 pieces each.

Take 1 square of each color, fold them in half, as in the top photo. Now put them on top of each other.

Fold the corners of the triangle towards each other. You will get a triangle folded in half.

Cut the edge of the triangle and singe it, as in the photo.

Make the remaining 6 petals in this way, you should get 7 pieces in total. You can alternate colored sides, orange on the inside or outside.

Form a trefoil from three petals. Glue them together with glue.

Glue on the petal decoration, and attach beads or stars on top of it. Form a loop from the St. George ribbon, and cut its ends like a check mark. Then secure the ribbon with glue and decorate with a sprig of kanzashi petals. Add a white bow to the side of the brooch.

Flower from St. George's ribbon, detail

A flower from the St. George ribbon is no less impressive decoration than eyelets, bows and numbers. You can also make a brooch out of it and secure it with a pin.
We will form the St. George flower from a two-color ribbon. It is better if it is a satin ribbon, it is more flexible. We will need:

  1. St. George ribbon - 1 m;
  2. Flower decorations (you can choose according to your taste);
  3. Lighter;
  4. Scissors;
  5. Tweezers;
  6. Glue gun;
  7. Glue cartridges;
  8. Ruler.

We cut the tape into strips of 7 cm.

Fold it as in the photo and hold it with tweezers.

Let's roll it up again.

Fold the formed part in half.

Turn the bottom edge up and singe the protruding threads of silk.

It turns out to be a flower petal.

It is necessary to make 5 St. George petals.

Now you need to cut 20 cm from a long strip. Cut the ends with a tick.

We roll the tape separately, as in the photo below. We fasten the front and back sides together with glue.

Attach a pin to the reverse side.

Now we connect all the parts of the color onto the brooches using glue, and attach the decorations on top. The flower is ready!

St. George's ribbon with carnation, DIY craft

The best materials for making cloves is foamiran paper. This material resembles rubber, suede and paper at the same time. At the same time, it is easy to form flowers from it. Foamiran segments different colors sold in craft stores.

Prepare the following items:

  1. Foamiran (green, pink) - 1 sheet each;
  2. Straight scissors;
  3. Scissors with uneven edges;
  4. Glue moment;
  5. Iron;
  6. Gun with glue cartridges;
  7. Foil balls (1.5 cm);
  8. Wire rod for flower;
  9. Paper;
  10. Pen-pencil;
  11. Pin.

Prepare a template for foamiran.

Prepare the details for the flower. Then measure out the tape from which we will form the loop for the brooch. Trim the edges to the shape of a swoosh.

Fold the ribbon into a loop.

Trace the foamiran according to the templates, as in the photo. Cut out the parts Pink colour scissors with uneven edges, cut the green blanks with straight scissors.

Cut the pink foamiran blank as follows:

Turn on the iron. We need to bend the edges of the carnation. Place the foamiran circles against the iron, holding the edge.

Do this for each pink piece.

Fold over the edges on all pieces. You should end up with blanks with folded edges, as in the photo.

Now pin circles of pink foamiran onto the wire (flower stem).

Place a drop of glue on the bottom center. Form a bud.

Continue attaching carnation petals to the wire.

It should look like a clove like this.

Let's prepare the base of the flower.

Apply a drop of glue under the outermost petal.

Glue the neck of the flower.

Now all that remains is to glue the leaves.

The flower is ready.

Glue the carnation to the ribbon. Apply glue at the flower head and stem. Press down and hold for 3 seconds.

On back side secure the pin.

Our brooch with carnations is ready.

Video Ribbon of St. George master class

St. George ribbon made of foamiran, photo 2 options

Star from the St. George Ribbon, detailed video

Car pendant from the St. George ribbon, photo 2 options

  • Craft “Memorable Panel”.

How to tie the St. George Ribbon

It is customary to wear a memorial ribbon in plain sight, so it is important to know how to tie it correctly.

  • The St. George ribbon can be tied in a bow. This is absolutely not difficult, remember your first grade lessons;

  • The St. George ribbon is pinned on May 9, so it is often folded in the form of a number;

    • How to wear the St. George Ribbon

    If you follow the rules, it was customary to wear the St. George Ribbon on the chest, neck or over the shoulder. There was no question of any ties on hair, shoes, or door handles. This memorial symbol was initially considered an award ribbon for great services to the fatherland and now, through the burden of centuries, it has been somewhat modified. They wear it in different ways, just like they come up with it different shapes. Here are the main ways to wear the St. George Ribbon:

    • On the chest in the form of a ribbon;

    • On the chest in the form of a brooch;

    How to fold the St. George ribbon, diagram

    • Scheme 1;

    • Scheme 2;

    • Scheme 3.

In that simple lesson you'll learn how to create a custom feed for your website.

Necessary materials

Step 1. Create a new document and name it “Tape”. IN this lesson The size used is 600x600 pixels.

Step 2. Create a new layer and name it "Background Texture". Fill it with something light color(I used #cccccc). Then we move on Filter - Noise - Add Noise(Filter - Noise - Add Noise) and add some noise to give the layer some texture. I used these settings:

Amount: 10%
Distribution: Gaussian
Monochromatic: Active

Reduce the opacity of the “Background Texture” layer to 15%.

Step 3. Now let's create rectangle, in which we will draw a ribbon. I used the Rectangle Tool (U) with a fixed size of 300x200 pixels.

Place the shape in the center of the canvas and name the layer “Clipping Mask”.

Step 4. Apply layer styles to the Clipping Mask to add a shadow and stroke.

Step 5. Take any image (I used a screenshot from the PSD Tuts site) and place it in the center of the working canvas above the “Clipping Mask” layer, then go Layer - Create Clipping Mask(Layer - Create Clipping Mask).

Step 6. Now we have the image ready on which the ribbon will be placed. Tool Rectangle Tool(Rectangle) (U) draw the base for the ribbon. Rotate it 35 degrees. For this we use Free Transform(Free transformation). This function can be activated with a key combination CTRL+T or through the menu Edit - Free Transform(Editing - Free Transform).

Make sure the edges of the tape extend beyond the rectangle.
Ribbon color on this moment doesn't matter since we'll apply a gradient fill later. Let's call this layer "Ribbon".

Step 7 Now we'll create a mask for the "Ribbon" layer that will hide the extra areas. We do the following:

1. Hold CTRL and click on the “Clipping Mask” layer thumbnail. This will load the rectangle selection.
2. We need the ribbon to extend slightly beyond the boundaries of the rectangle, so we expand the selection by 4 pixels with the command Select - Modify - Expand(Select - Modify - Expand).
3. Next, select the “Ribbon” layer and create a mask. You can do this in two ways:
A) Layer - Layer Mask - Reveal Selection(Layer - Layer Mask - Show Selection)
b) Click on the button Add layer mask(Add layer mask) at the bottom of the layers panel

Step 8 Let's add some layer styles to the ribbon to add shadow, light, and texture.

Drop Shadow(Shadow) (outer shadow)
Inner Glow(Inner glow) (testura)
Bevel and Emboss(Bevel and Emboss) (light on edges)
Gradient Overlay(Gradient Overlay) (ribbon color)
Stroke(Stroke) (gives the edges of the ribbon crispness)

We get this result:

Step 9 Now we need to create the folded corners on the ribbon. Remember how we expanded the selection by 4 pixels?

1. Create a new layer “Corners” and place it above the “Background Texture” layer and below the “Clipping Mask”.
2. Choose dark color(I used #240500).
3. Take brush(B) approximately 9 pixels in size with hardness 100%.

Use this brush to draw small circles on the corners of the ribbon. Since the layer is under a clipping mask, we will only see the dark part near the corners.

To better understand this point, look at the image below. This is what our document will look like if we reduce the opacity of all the layers above the “Corners”.

Step 10 Let's add some text. I used these parameters:

Chunk Five font
24pt
Letter spacing 75
Color #240500

Place the text on the ribbon and rotate it 35 degrees (using Transform (CTRL+T) as in step 6). Now let's add layer styles for the text.

You should end up with something like this:

Step 11 Now we will add stitches to the ribbon. Let's take it Text Tool(Text) (T) and write dotted line from hyphens. Then we change the text parameters:

Chunk Five font
13pt
Letter spacing 200
Color #700404
Text layer opacity: 50%

Place the text on the ribbon and rotate it 35 degrees like we did in steps 6 and 11. Then add layer styles to give the stitches a realistic look.

Duplicate the text and move it to the bottom of the feed. We get this result:

Step 12 The last thing we need to do is apply a mask to the stitches so that they don't extend beyond the edges of the tape. To do this, duplicate the “Ribbon” layer mask and move it to the layer with stitches.

Repeat these steps for both layers to get something like this:

Final image
This is all! Now you know how to create a simple ribbon in Photoshop. You can experiment with other settings and change the color. Or create rounded edges on tape. This can be achieved using Pen Tool(Pen) (P) and layer masks. Good luck!



Related publications: