home-Hats-Knit a shirtfront for a girl with knitting needles with a description. Knitted shirt front for a man: detailed instructions for loving girls and wives

Knit a shirtfront for a girl with knitting needles with a description. Knitted shirt front for a man: detailed instructions for loving girls and wives

Men, just like women, love warmth and comfort. In winter weather, the traditional tying of a scarf can be replaced with a shirtfront that will fit tightly around the neck and chest, preventing cold air from penetrating inside. The pattern for knitting a shirt front for men is practically no different from female version. The difference lies only in the strict approach to the patterns, as well as in the style of the product itself and the selection of yarn color. This article will look at a diagram of how to knit a shirtfront with detailed description the entire work process.

Choosing patterns for a men's shirtfront

Unlike children's and women's bibs, in men's pieces they use completely different ornaments that can emphasize masculinity, as well as add zest to general image and style. Basically, needlewomen prefer to use knitting patterns such as “Aranas” or relief motifs.


A pattern with a description for knitting a Scandinavian pattern is also perfect. Moreover, such ornaments are now at the peak of popularity in men's fashion. On the Internet you can find great amount drawings to knit a great shirtfront for a man.


You can also use your skills and imagination to create your own ornament that will be unique. To do this, use a combination of several patterns at once or knit the product with a simple garter stitch, but with different colors yarn. As a result, you will get an original accessory that doesn’t even require a diagram.

Dickey for a man

Before knitting, you need to take measurements. And it’s best to knit a sample of simple faces. satin stitch Stretch the canvas horizontally and measure its width with a centimeter. Next, measure the circumference of the man’s head from ear to ear, and add another four centimeters to this. As a result, you will get the required neck size so that your head can pass through it freely.

Knitting a shirt front for a man must be done from top to bottom. This is done on five knitting needles or on circular knitting needles. We invite you to knit the basic version of the product. Its scheme is very simple. But you can come up with quite a few ways in which persons. the smooth surface will be replaced by beautiful relief patterns or braids. At the end, it is advisable to crochet the product.


In addition to the main tool, prepare some yarn, which should consist of acrylic and wool. Knitting a two-by-two elastic band will be done by alternately knitting two knit stitches and two purl stitches. In stockinette stitch, all circular rows are knitted with knit stitches. Scheme garter stitch will be performed as follows: the first circular row is done with all knits, and the second with all purls. Pick up eighty-eight links with your knitting needles and join them in a circle, avoiding twisting. Then the loops need to be distributed among four tools, twenty-two pieces each. After this, knit a two-by-two elastic band with knitting needles. Its height should be approximately eighteen centimeters. Although the height is determined individually for each person. If you have the opportunity to try the product on, then do so. If not, then knit by eye. Then move on to the stockinette stitch, simultaneously making an increase in every second row according to the following system:

  • in the first row, as in all odd lines, make only knit stitches with knitting needles;
  • the second stripe starts with eleven knit stitches, then knit three knit stitches. n. from one. You need to make knit 1 from one link without removing it from the knitting needle, then yarn over and knit another knit stitch from the same thing. When you start a new strip, you need to tie the yarn over with your face. The second row is not finished yet. Repeat the above manipulations three more times and complete knitting 10 faces. P.;
  • the fourth row starts with twelve faces. p., then knitting three persons. item from one, which is repeated three times and eleven persons. P.;
  • the sixth, eighth, tenth rows and so on until the twenty-fourth are knitted in the same way as the fourth strip. But the number of persons. p. between increases will be constantly added.


When the pattern according to which you knitted a shirt-front for a man reaches the end of the twenty-fourth row, you should end up with 185 stitches. If you wish, you can add or reduce the length of the product by increasing the number of stripes with additions. At the end, you need to knit four lines with knitting needles using the garter method without adding. Close the remaining loops and hide the end of the thread. Crochet a man's shirtfront.

After practicing on simple version bibs for men, you can use other ways to create such an accessory with a description. For example, knit a shirt front with buttons and a polo collar. This design of the product is classic in men's fashion.

Video: Knitted shirt front

In this lesson we will try to tell you why knitting a piece of clothing called a shirtfront is so popular, how to knit it, and how to wear it correctly. First, let's find out what a knitted shirt front is for men. Then we will figure out what the approximate knitting pattern is, and also give a description of the work.

Any man's shirtfront is simply a knitted scarf that has the shape of a collar. Such unusual shape warm men's scarf has been fashionable for a very long time, and remains in demand in our time. The long-term popularity of shirtfronts for men is due to its extreme convenience. This men's scarf is top part warm winter sweater, which fits tightly around the throat and shoulders, protects us from frost and wind. Such men's accessory you won’t have to wrap it around your neck trying to successfully position and tie it. It simply slips over the head and rests comfortably on the shoulders, while insulating and protecting a man's throat and shoulders.

In this photo you see knitting the simplest shirt-front for men. Such a rough knitting more than anything suitable for men. For needlework, the easiest pattern is used, which will be easy to knit even for beginners. For such a dense, strictly laconic pattern there is a fairly simple description and diagram. Let's measure the circumference of a man's neck and make a sample to calculate the knitting density. Then we will decide on the number of required loops (P), and make a set of them. For an adult man, the set can range from sixty to eighty units. A three by three elastic pattern will require a P that is a multiple of three. Knitting this male model performed with stocking needles from above. First you need to tie the throat area with a 3x3 elastic band. Having reached the required length, we will begin knitting the bottom of the product. To correctly knit the bottom of a man's shirtfront, you need to add units. To do this, add 1 loop on each knitting needle at the beginning of the row. We will add in every sixth row. This knitting is done until the desired length of the man's shirtfront is reached, after which we close the P and crochet the edges.

Types of bibs

Any knitted shirtfront will successfully replace the most luxurious of scarves. Knitting this accessory for men has some features. Now we will describe these small differences. In general, the knitting pattern is almost no different from women's patterns.

These items men's clothing usually performed somewhat more roughly than female or children's models. To knit a men's accessory, the pattern most often used is an elastic band or a rope. If you don’t need to imagine an elastic band, then you will see an example of the “Rope” pattern in the photo below.

Sometimes craftswomen choose hem knitting to make it easier to add P to expand the fabric.

In addition to the double needles mentioned earlier, circular knitting needles are used to make a shirt front. With these knitting needles it is knitted from above, from the throat, using an elastic band or string. For an average piece you will need to cast on about eighty stitches. It is advisable to knit the first three rows with knitting needles in stockinette stitch, and then begin the main pattern. The choice of the type of main pattern depends only on your personal taste. The pattern requires knitting the neckline to the required length, after which P additions begin in the places where the front tracks pass. Additions are made from broaches in place of the front tracks, one per track. When moving to the next row after the increases, do not forget to knit them with purl loops, otherwise unwanted holes will form there. It should be noted that for a man's shirtfront, a somewhat unique shape of the canvas should be formed. It differs in that it has an elongated front part. There should be some noticeable feature that characterizes men. It can be achieved by using a dull color of thread, a coarse dense knitting, where the threads are half as thick as the knitting needles. Melange yarn, or dyed in sections, is also perfect.

To lengthen knitted the front part of the shirtfront, you need to do the throat and shoulder area, then close three quarters of the total amount, leaving the front part on the chest to work on. Then you can knit the length of the shirtfront in the shape of a rectangle, or by decreasing the P. If you decrease the P, you will get a different shape, slightly truncated, semicircular or triangular, as in the photo below.


It's all about which shirt shirt design suits you best. If you knit according to a rectangle pattern in the chest area, then make it about twenty-five centimeters wide and twenty centimeters long. When the length is knitted, cast off the very last row of stitches. If you like a more elastic edge of the fabric, then it is best to knit it with the “Rope” pattern.

Video master class for beginners

To better understand the material on knitting a men's shirt-front, you are offered a video master class, as well as a work diagram. For needlework, prepare number three knitting needles and thick yarn to make the product warm and elastic. The back and shoulder areas of the accessory are knitted with 1x1 elastic, the front part is knitted with stockinette stitch, and the entire product is made of raglan, where the number of loops is increased. There is also a longitudinal harness in front. The number P must be a multiple of four, plus two edges. You determine the height of the gate as you wish. We make a set of sixty-two units with knitting needles, and knit the neck with an elastic band. Having tied the elastic length we need, we move on to performing the shoulder area. To do this, we divide the units into four parts, fifteen pieces each. At the border between these loops there will be a raglan line, so there we will make two from one P.

In the next purl row, raglan should be knitted with purl Ps, and the rest according to the pattern. Next comes the next front row, where in the raglan area it is necessary to make P increases. These increases are made from broaches that are lifted onto a knitting needle and knitted according to the elastic pattern. The raglan line can be designed in any way you like, but in this master class it is designed exactly as shown in the video. In the area of ​​the front shelf we knit a strip in garter stitch, so that we can then make a decorating strand on it. We make additions in each row, directly next to the edges, as well as in the place of the raglan line. As the length of the canvas advances, the raglan line begins to be drawn, and the width of the canvas increases, the back, front shelf and shoulders are formed. On the front shelf it is necessary to tie a decorating rope, which is formed using removed and transferred loops. Having knitted the shirtfront to the required length, we will close some of the loops on the front side, not reaching the raglan line of the front front. Next, we knit the row without adding, and turn the fabric over. Then we close the loops of the second shoulder, and knit the front front according to the pattern. On the front side of the front shelf we make several decreases along the raglan line. Having tied the front shelf almost to the harness, we close all the loops. Now all that remains is to sew the shirtfront with a needle or crochet it.


Photo MK

During the cold season, it is always worth warming your body so as not to catch a cold at one point. Everyone insulates themselves as best they can and uses those things that they consider more attractive both in price and in convenience. Every part of the body should be protected from the cold efficiently, and this is especially true for the neck. Most people nowadays prefer to use a scarf, which does a good job of retaining heat. However, with modern trends Most people have forgotten that there is such a wonderful thing as a shirtfront. And the knitted shirt front for men looks especially beautiful.

From the photo you can see that such a wardrobe item fits perfectly into the life of any man who lives a measured life. As already mentioned, such a wardrobe item will perfectly brighten up any man. This type of work is perfect for beginners, and such clothes can be made by a person who does not even have great knitting skills.

Preparation and necessary materials

Before you start the knitting process, you should specifically decide for which seasons. this item wardrobe will be used. If a man will wear a shirtfront in late autumn or winter, then it is advisable to use thick yarn so that the man feels warm and comfortable. If a man will wear a shirtfront in early autumn and spring, then it is recommended to use thin yarn, which can protect a person from slight frosts, without greatly interfering with everyday life.


The shirtfront should be comfortable and not interfere in any way with the person who will wear it, so you must first take measurements of the neck of the man who will wear it. To make the measurements correctly, you need to use a centimeter to measure the distance of the circle between the man’s two ears, and ultimately add 4 centimeters to the resulting measurements. Thus, you can get the neck size that will be comfortable for the man who will wear this item.


Once the decision on the thickness of the yarn has been made, it is worth thinking about the color and texture of the future shirt-front. It is recommended to choose fairly strict colors and not to use very bright or eye-catching colors in decoration. The drawings should be made straight, and not much emphasis should be placed on them, since the shirtfront for a man should be strict. For a man's shirtfront you can use several different patterns:

  • knitting knit stitches in purl and knit rows. This pattern is called a scarf pattern.
  • The loops can be alternated. First, one knit stitch, and then one purl stitch. Thus, an elastic band is obtained.
  • If you take one knit stitch and one purl loop and knit them alternately, shifting them by one loop on each next row, you can get a pearl pattern

These are the patterns that are most suitable for a beautiful, and at the same time strict, men's shirtfront.

What do you need to take before you start work?

  • For the final connection of the parts you will need either a darning needle or a No. 4 hook.
  • The knitting material itself will be 100% acrylic yarn (100g/350m) approximately 200g.
  • Of the main knitting needles, you will need straight knitting needles No. 4.5 and circular knitting needles No. 4


Knitting a men's shirtfront

The pattern for knitting a man's shirtfront using knitting needles is not complicated; every girl can use it. Next, instructions will be shown on how to knit a regular shirtfront, but this does not mean that it cannot be somehow decorated with any patterns, and how it will look and look depends on the preferences of both halves. After all the materials have been prepared and all measurements have been made, you can begin to work.

  1. First you need to knit the back. You need to cast on 72 loops on the knitting needles, and then knit 8 rows with a pearl pattern, which will ultimately result in 3.5 centimeters for the bar. After this, you need to knit in a strict order, and the order is as follows: the edge pattern, after, a pearl pattern in the amount of 5 loops, then 60 garter stitch loops, and then the pearl pattern, also in the amount of five loops, and then the edge pattern again. Now you need to count exactly 20 centimeters from the beginning of knitting, and at the same place you need to make a shoulder bevel. The bevel needs to be closed on both sides and to start with 11 loops, and after 1 row another 12 loops. After this, through the row you need to close the neck with another 26 loops that remain.
  2. After the back of the shirtfront has been knitted, you can start working on the front. The front can be knitted just like the back, but you need to make a cutout in the front, which will ultimately be a neckline. To do this, you need to count 20 centimeters from the beginning of knitting and at that place you need to close the middle 12 loops. After this, both sides need to be knitted separately. To round the neckline, starting from the inner edges, you need to bind off 3 loops in every second row only once, also 2 loops, and then one loop only 2 times. After all this has been done, you need to start knitting the shoulder bevels from the outer row, and this should be done only after the fourth row of rounding the neckline, which is located on the neckline.
  3. Now that both pieces have been connected, they can be sewn together. You need to cast on 76 stitches on the knitting needles and start knitting with an elastic band 14 centimeters along the edge of the neckline. And then, focusing on the drawing, you can easily close the loops.
  4. The resulting shirt-front needs to be steamed using an iron with damp gauze under it. Thus, giving the product the correct shape. Photo of the final product:

Video lessons on this topic

Also, if you are interested, there are videos that can also teach similar crafts.


You can knit a great gift for your man on the eve of the upcoming holidays, Valentine's Day and February 23rd. He will definitely appreciate it, because you put the warmth of your hands into it. In addition, the shirtfront is very comfortable - it does not slip like a scarf and protects the throat well. There are a lot of options for shirtfronts, you can knit a circular one, but I settled on a shirtfront in which two parts, front and back, are knitted separately - this is the wish of its future owner.

For the size 52 shirt-front I used Uniti Light yarn from the Vita company; I needed 100 grams, that is, one skein. I really liked the yarn I used – it’s soft and lays flat. And for a small decor in the form of stripes I used 30 grams of dark gray yarn from some leftovers. You can knit without stripes or use some other color. And you will also need 5 circular knitting needles, number 4.

Let's get to work. We start knitting from the neckline, which is knitted on circular knitting needles with a 2 by 2 elastic band. It is more convenient to knit on circular knitting needles, since there will be no seam. Take 2 knitting needles and cast on 88 stitches. You can vary the number of stitches, but remember that it must be a multiple of 4 for the elastic pattern to match.



Next, we pull out one knitting needle, as usual - be careful, loops fall off very easily from such circular knitting needles. Next, take the first of the circular knitting needles and knit 28 loops with an elastic band 2 by 2. Next, release the first knitting needle, take the second knitting needle and also knit 28 loops with an elastic band. After which we release the second knitting needle again and take the third circular knitting needle - we knit the remaining 32 loops with an elastic band. Please note that after knitting all the loops, the elastic pattern should match - that is, if the first two loops on the first circular knitting needle were knit, then the last two loops on the third circular knitting needle will be purl.

I used 4 knitting needles - one for working and 3 for fabric. Three knitting needles are quite enough for such a fabric and knitting is easier and faster.

In the end it turns out like this:



Next, we close the knitting and continue to knit 36 ​​rows with an elastic band. The neckline is tied and it looks like this.



After this, we move from the elastic to the regular stockinette stitch, but for now we continue to knit with circular knitting needles. When moving to the stockinette stitch, I switched the fabric to 4 knitting needles to make it easier to follow the increases.

So, we begin to knit the next row after the elastic band, at the same time we distribute the loops and begin to increase as follows:

We knit with the first knitting needle - 1 knit, 1 increase from the broach, 20 knit stitches, 1 increase from the broach, 1 knit;

We knit with the third knitting needle - 1 knit, 1 increase from the broach, 20 knit stitches, 1 increase from the broach, 1 knit;

We knit with the fourth needle - 1 knit, 1 increase from the broach, 20 knit stitches, 1 increase from the broach, 1 knit.

In total, we used all 88 loops of our neck and added 8 new loops. Before adding, for beauty, we simply leave the knit stitches, they will delimit our canvas - in the photo in the center you can just see this decorative strip of knit stitches. There are four such demarcation stripes in total - two on the shoulders, one in front and one in the back.

Next, we knit 14 rows of black yarn in stockinette stitch, adding 8 loops in every second row according to the same pattern. We knit the first row - 1 knit, 1 increase from the broach, 22 knit stitches, 1 increase from the broach, 1 knit. We simply knit the second row all knit stitches. We repeat the first and second rows, the only difference is that with each repetition, two will be added to the average 22 knit stitches, which we also knit with knit stitches.

After this, we switch to contrasting yarn, in my case, dark gray, and knit 3 rows with it, also making 8 stitches per row in each second row. In total, we get 38 loops on each knitting needle.

After we have knitted the third row with gray yarn, we divide our knitting into two parts, which we will knit separately.

We take black yarn and cast off 5 loops from the first circular knitting needle, after which we knit one knit stitch (on the knitting needle, in addition to it, there will already be one edge loop, after closing the loops) and decrease with a slant to the left. Next, we knit 29 stitches from the first circular knitting needle, make an increase from the broach according to the pattern, and knit one knit stitch from the first circular knitting needle. After this, we do not change the working knitting needle, since we have already finished circular knitting, but with the same knitting needle we begin to knit loops from the second circular knitting needle - 1 knit, 1 increase from the broach, 29 knit stitches, 2 loops together with a tilt to the right, 1 knit, 1 edge. We still have 5 loops left on the second circular knitting needle - they will need to be closed, but later, so as not to interrupt the knitting. Therefore, we throw these 5 loops onto the third circular knitting needle and for now we forget about them, just as we forget for now about the loops on the third and fourth circular knitting needles - we will finish this part later.

We now have 62 loops on the main working knitting needle - we will usually knit them with two knitting needles. At the same time, in order to maintain the slope of our stripes, in every second row we will make increases from broaches in the central part. And so that the shirt front narrows a little towards the bottom, we make decreases in each row, front and back. Thus, the second row (purl) of our knitting will be like this: 1 selvedge, 1 purl, 2 purl with a slant to the left, 54 purl, 2 purl with a slant to the right, 1 purl, 1 selvedge. All other purl rows will be knitted in a similar way, only the number of middle purl loops will change, each time decreasing by 2 loops.

The third row (knit) of knitting will look like this: 1 knit, 1 knit, 2 knit with a slant to the left, 52 knit, 2 knit with a slant to the right, 1 knit, 1 knit. All other facial rows will be knitted in a similar way, only the number of middle facial loops will change, each time decreasing by 2 loops.

At the same time, every three rows we change the color of the yarn - in total I got 4 dark gray stripes. You can lengthen the shirtfront, but I don’t recommend shortening it – it will ride up.

After knitting the last dark gray strip, I knitted 10 rows in black garter stitch to prevent the fabric from pilling. At the same time, I also followed the whole scheme of increases and decreases, otherwise it will turn out ugly and the fabric will tighten.

After knitting one part, we still have the back part of the shirtfront - we do it in absolutely the same way. The difference in the first row is that we must cast off not 5 loops, but 10, since we still left 5 loops from the front so as not to interrupt the knitting.

And we will also have to close the last 5 loops - to close them, I took a small piece of black yarn and closed them separately so as not to break the main thread.

In the end, we got this shirt-front as a gift to our beloved husband!

Circular knitting with stocking needles

Circular knitting greatly simplifies the process of creating a new item and, oddly enough, is used very often, for example, when knitting mittens, socks, hats, even jumpers and sweaters. But in the process of knitting, novice knitters often encounter the problem of skewing the fabric. In this short article I will describe how to knit loops correctly so that the circular fabric is even and does not warp.

So, for clarity, there is a video in which I showed how to knit knit and purl stitches on stocking needles. When knitting in a circular pattern, the loops get twisted and due to this, if they are not returned to their original position, the fabric will become mowed. Therefore, the point of knitting in the round is to knit the loops with a turn.

We will use the following terms:

– when the loop is on a knitting needle, then the part that is in front of the knitting needle will be called the front wall, and the part that is behind the knitting needle from you will be called the back wall of the loop.

The first two loops of the video are front ones - we pick them up by the front wall, that is, we insert the knitting needle from the bottom up behind the front wall of the loop and grab the working thread. Pulling out a new loop.

The second two loops in the video are purl. In general, if you are knitting a simple knit fabric, then purl stitches are not used - you knit knit stitches all the time, but when knitting an elastic band, for example, you cannot do without purl loops. So, we knit the purl loops by inserting the knitting needle behind the back wall of the loop and picking up the working thread.

Thus, we knit all the loops with a flip, thanks to which they lie evenly, as when knitting with two ordinary knitting needles. And the result is such a smooth canvas that does not require stitching.

I wish you success.




Related publications: