How to make a slanted line in Photoshop. How to draw a straight line in Photoshop? Tips and tricks

Graphics editor Photoshop is rightly considered a fairly complex program. He has a large number of tools, and therefore is able to perform many tasks. Well, in order to understand all its nuances, you need to make every effort, spend a lot of time and, of course, have a great desire, otherwise nothing will work out.

Of course, not all teams are within the capabilities of a beginner, for example, but this is only at first. But you have to start somewhere! I suggest starting with something simple, but at the same time very the right lesson: how to draw a straight line in Photoshop. So, let's figure it out.

Brush and Pencil tools

There are several ways to draw a regular straight line in Photoshop, it all depends solely on the user’s preferences. By the way, there are also several ways. To begin with, I would like to introduce you to the tools that are not the most obvious for these purposes: “Brush” and “Pencil”.

Please note that if you hold down the key before drawing, the line will not turn out strictly straight, so do not forget to perform this simple action.

Line Tool

This method of creating a straight line is perhaps very obvious and lies on the surface, and, nevertheless, beginners may not know about it. The point is that this tool is part of a group of others called by the U button on the keyboard. You can also call it manually; to do this, on the vertical Panel, click on the “Rectangle” button with the right mouse button. A small menu will appear with a list of possible tools, including the one we need – “Line”.

Click on it, then adjust the header with customizable parameters, for example, you can adjust the line thickness. Now let's start drawing: to do this, just drag computer mouse to the side while holding its left button. If you clamp in parallel, you will get a vertical or horizontal line. Also, if you hold down the same key and drag a line along an inclined line, the line will accordingly be inclined at an angle of 45 degrees.

That's all science, as you can see, absolutely nothing complicated! Patience, a little practice, and you will succeed.

Lines, as well as other geometric elements, are an integral part of the work of a Photoshop master. Lines are used to create grids, contours, and segments. various shapes, skeletons of complex objects are built.

Today's article will be entirely devoted to how you can create lines in Photoshop.

As we know from the school geometry course, lines can be straight, broken and curved.

Straight

To create a straight line in Photoshop, there are several options using various tools. All the main construction methods are given in one of the existing lessons.

Therefore, we will not linger in this section, but will immediately move on to the next one.

Broken

A polyline consists of several straight segments, and can be closed, forming a polygon. Based on this, there are a couple of ways to build it.

1. Unclosed polyline

As we said earlier, such a line is a polygon. There are two ways to construct polygons - using the appropriate tool from the group "Figure", or by creating a selection free form followed by a stroke.

• Figure.

  When using this method we get a geometric figure with equal angles and the parties.

  

  To obtain a line (contour) directly, you need to adjust the stroke, called "Stroke". In our case, it will be a solid stroke of a given size and color.

  

  After disabling the fill

  

  we will get the required result.

  

  Such a figure can be deformed and rotated using the same "Free Transformation".

• Straight line lasso.

  

  Using this tool you can build polygons of any configuration. After placing several points, a selected area is created.

  

  This selection needs to be circled, for which there is a corresponding function that is called by pressing RMB on the canvas.

  

  In the settings you can choose the color, size and position of the stroke.

  

  

Curve

Curves have the same parameters as broken lines, that is, they can be closed or open. You can draw a curved line in several ways: with tools "Feather" And "Lasso" using shapes or selections.

1. Unclosed

Such a line can only be drawn "Per"(with a contour outline), or “by hand”. In the first case, the lesson, the link to which is above, will help us, and in the second, only a steady hand.

2. Closed

• Lasso.

  

  This tool allows you to draw closed curves of any shape (segments). Lasso creates a selection, which, to obtain a line, must be outlined in a known way.

  

• Oval area.

  

  IN in this case the result of our actions will be a circle of regular or elliptical shape.

  

  To deform it, it is enough to call "Free Transform" (CTRL+T) and, after pressing RMB, select the appropriate additional function.

  

  On the grid that appears, we will see markers, by pulling which you can achieve the desired result.

  

  It is worth noting that in this case the effect also extends to the line thickness.

  

• Figure.

  Let's use the tool "Ellipse" and, using the settings described above (as for a polygon), create a circle.

  

  After deformation we get the following result:

  

  As you can see, the line thickness remained unchanged.

This concludes the lesson on creating lines in Photoshop. We learned how to create straight, broken and curved lines different ways using various program tools.

These skills should not be neglected, since they are the ones that help build geometric figures, contours, various meshes and frames in Photoshop.

25.01.2017 28.01.2018

Hello to all Photoshop lovers!

Drawing a straight line in Photoshop is not at all difficult, just move the mouse cursor, but, alas, this movement does not always turn out straight. In this lesson we will learn how to draw straight lines.

To make the line in Photoshop smooth, hold down the keyboard SHIFT and you will draw a straight line in Photoshop. This allows you to draw straight horizontal and vertical lines. You can also draw diagonally; to do this, click the left mouse button once on the area where the line begins, and a second time where it ends (with the SHIFT). This will draw a straight line at the given coordinates.

There are several ways to draw straight lines in Photoshop, giving them color, thickness and other styles. The following tools are commonly used: Brush, Pencil, Pen, Line, Rectangular Marquee. Which tool is best suited for the task is up to you to decide. Each method has its pros and cons.

Draw a straight line with the Brush Tool

The easiest way to draw a line is with a tool Brush (Brush Tool). Create a document in Photoshop (Ctrl + N) with an arbitrary size, I have this 800x600 pixels:

Activate the tool Brush (Brush Tool). Tool hotkey - B.

At the top settings panel change tools if necessary size And rigidity brushes:

We draw the line:

Somehow it’s not quite even, you’ll reasonably notice, right?

To draw perfectly straight line, you need to hold down the key before starting to draw Shift, draw a line and release the key. This is how smooth the line turned out:

Keystroke method Shift before starting to draw a line, it helps to draw a strictly horizontal or vertical line at an angle of 90 degrees, but if you need to draw a line, for example, diagonally, then you must first click the mouse button at the beginning of the line and hold down the key Shift, draw a line, then release the mouse button and Shift.

Draw a straight line using the Pencil Tool

Tool Pencil Tool is in the same tool group as the tool Brush, hotkey calling the tool - B.

Drawing a line using the tool Pencil Tool similar to drawing Brush- click the mouse at the beginning of the line, hold down the key Shift and draw a line.

Draw a line with the Pen Tool

To draw a line with the tool Feather It will take a little longer than in previous cases.

Activate the tool Pen Tool tool hotkey - P.

Don't forget to make sure that the tool Feather is in mode "circuit". You can view this at top panel instrument settings:

Create a new layer, click on the layer creation icon in layers panel:

Draw a straight line - just put two points. To draw a horizontal or vertical line, hold down the key again Shift:

To start drawing new line, hold down the key Ctrl and click on the canvas; if this is not done, the lines will be created continuously.

Draw arbitrary curved lines and hold down the key at the end Ctrl with a mouse click on the canvas to complete the lines.

The lines are ready, but, unfortunately, they are only visible in Photoshop in the tab Outlines (Window-Paths), if you save the image, for example, in jpg* format, the lines will not be displayed.

In order to make them visible, we return to the tool Brush, V top panel adjusting instrument settings size, brush hardness and if necessary, select the brush itself. We will need a round brush:

Choose a color:

Activate the tool Feather, right-click on the canvas and select “Stroke Path”:

The following window will open in which you need to select as the source "Brush", and a tick "Simulate pressure" (Simulate Pressure) It is advisable to remove it to get straight lines:

Result:

If you leave a checkmark “Simulate Pressure”, the lines will become thinner towards the ends:

Draw a line with the Line tool

One of the most common ways to draw a straight line in Photoshop is the Line. Located in the left panel:

The great thing is that you can easily adjust the color and thickness of the line:

With the clamped SHIFT I draw straight lines. They are created by the shape tool from a vector. You can easily draw a vertical, horizontal and a straight line at a 45 degree angle.

Straight line using selection in Photoshop

It happens that you don’t want to bother with the settings of vector shapes and brushes. Therefore, you can simply select the desired area in Photoshop, for example, in the form of a line and fill it with color.

There is a Rectangular Marquee tool in Photoshop:

For example, we need a long and thick line in Photoshop. Select the desired area:

Choosing a tool Fill and set the color for the future line.

Fill the selected area with color and deselect it CTRL+D. We have a straight line.

Like these ones simple ways draw a line in photoshop. We hope you found this information useful! Good luck in your creativity and good mood!

Good day, dear readers of my blog. It would seem, what does it cost to draw a straight line in Photoshop? Hold down Shift and there you go. Nevertheless, this can be done in as many as three ways. Everyone's result will be different.

In this article you will learn three ways to draw a straight line in Photoshop. Which filter to use to create a wave. How to do this with the help of another interesting instrument. I'll show you how to achieve a dotted line and draw under certain angle.

A lot of information awaits you. Shall we get started?

Line Tool

First, I'll show you how to use a tool that's designed to create straight lines. In this place you can have a rectangle, oval, ellipse or polygon. Just hold down the left mouse button for a few seconds to open a menu with additional tools.

First things first. One of the most important parameters– thickness. Thanks to the line, you can even draw rectangles. You just need to make it fatter.

Next comes “Fill” and “Stroke”. Click on the color block to the left of the inscriptions and select a shade. If you want to make a stroke, enter its width. Now, my screenshot shows the option without it. The no color icon looks like this. Gray line crossed out in red.

You can see the settings and the result in this screenshot. It's not very visible, but the thickness here is 30 pixels. On big picture 30 pixels may look like a modest stripe. Everything needs to be adjusted to your own dimensions.

This is what the line will look like if you select red for the stroke color.

The next button will allow you to create a dotted stroke.

If you reduce the thickness and remove the fill, you will just get a dotted line.

Here you can align the stroke to the inner edge, outer edge, or center of your outline.

And round the corners. True, it will not be so noticeable.

If you press Shift while you're drawing a line, Photoshop will automatically create a straight line. Horizontal or vertical. Depending on where you are taking her.

If you need a line at a certain angle, then the easiest way is to look at what the information window shows and adjust it manually, pointing it in a certain direction.

Well, now I’ll show you another one.

Brush Tool

I drew these rectangles using lines drawn with a brush.

Choose the type and size that suits your brush line.

Place a dot at the expected beginning of the line, hold down Shift and left-click where the strip should end.

There are two lines in front of you. The yellow one was painted using the Line tool, and the purple one was painted with a brush.

How to make a wave

No matter what tool you used, do wavy line The easiest way is to use a filter. Go to this category, find “Distortion” and select “Wave”.

Based on the preview picture, you will quickly understand what's what and how to set it up. The amplitude should be approximately the same. If it doesn’t work, you can just click on “Randomize” until a suitable one appears.

The last applied filter is always quickly accessible. I apply it to the layer with yellow stripe, drawn by the tool.

This is the result I got. As you can see, it is different.

Pen Tool

To be honest, I still can’t use a pen professionally. I know that you can draw anything with it: smoothly, quickly, fun and cool, but it takes me a lot of time and the result is not always at the level I expected. And yet I can even draw straight lines with a pen. It's worse with curves, but I'll try. I select “Feather”.

I put a dot, then a second one. While I haven't released the mouse button, I adjust the smoothness.

I do the same thing with each new point.

After all the manipulations are completed, right-click and select “Stroke outline” from the menu that appears.

You can choose several tools: pencil, brush, stamp, pattern, and so on. Now let this one be a brush.

I press the right mouse button again and select “Delete outline”.

This is the result I got.

Well, don’t forget that you can always use your collage making skills. Read the article about how to take a line from any picture and insert it into your image.

If you want to learn how to professionally use the pen and other tools found in Photoshop. I can offer you a course " Photoshop for beginners in video format ».

Lessons created by professionals will teach you everything you need to know about this program. You will save a lot of time searching for answers to this or that question. Ideas on how to complete the task will spontaneously appear in your head.

By the way, do you know how to make sure that you always have interesting needs related to Photoshop? This could take your relationship with this program to the next level. All you need is to be passionate about web design. People of this profession never sit idle. There are always clients, projects and new tasks.

There is a job for everyone, and you can do what you really like and bring good money. Read the article about or. Stop inventing tasks for yourself, let someone else pay money for your time.

Don't know where to start? Take the course Commercial Web Design Basics " Try a few free lessons, this will help you understand yourself and understand whether you are ready to explore new horizons.

OK it's all over Now. It's up to you. Decide when you are ready and start conquering new heights. If you liked this article, subscribe to the newsletter and take one step closer to your cherished goal every day.

Learn as much as you can about the Internet, write your success story, stop sitting around waiting. Take action. Your dream is realized by others every day. Today they are doing what you have been wanting for so long. Do they think about preparedness? The right moment is right now. Don't miss it. You have the strength to do this.

I wish you good luck. Until next time.