How to draw a beautiful frame. Drawing a frame

MS Office has become the most used, convenient editor for typing and processing text. In certain cases, a document requires additional external design, requiring the addition of stamps and frames. This procedure may differ for different versions of the office. Below is how to add a frame in Word 2010.

How to make a frame around a page in Word 2010

Word program from Microsoft has several editions; many changes have been made to the interface and menu. The software includes ready-made designs for framing greeting cards. There will be opportunities for preparing and writing dissertations, coursework(according to GOST), just for improvement visual perception text. Creating markup on a document page can be done in several ways. Below are instructions on how to make a frame in Word 2010:

Go to the "Home" tab.
In the “Paragraph” section, find the icon of a dotted square with a filled bottom border, click on the arrow next to it.
Click on the “Borders and Shading” line (located at the bottom).
A window will open to create a frame; you can set the thickness, color (white will not be visible), and style.
After assigning all the settings, click on “Ok”.

How to make a frame in Word for a diploma

The procedure - how to make a frame in Word 2010 - is of interest to all students who are defending coursework and diplomas. Boundaries must be set strictly in accordance with GOST, otherwise the work will not be accepted. At the first stage, you need to create sections for the document, for example, the main part, table of contents, title page. This is necessary so that the frame is displayed only for the necessary areas. To create sections, you need to go to the “Page Layout” item, click “Breaks/Next Page” at the necessary places. Instructions on how to make a frame correctly in Word 2010:

According to GOST standards, the design must have the following indentations: 20x5x5x5 mm. To make settings, go to the “Page Layout” section.
Click on "Fields/Custom Fields".
A window for entering parameters will appear. Install following values: top – 1.4 cm, left – 2.9, bottom – 0.6, right – 1.3 cm. Binding – on the left, orientation – strictly portrait.
From the menu, select Page Layout, click Page Borders.
Select the “Frame” line, immediately confirm “Apply to this section”, then click “Options”.
In the settings window, set the following parameters: top – 25 pt, bottom – 3 pt, left – 21 pt, right – 20 pt, in the parameters – “always ahead”.
Click "OK" and a border will appear for the section you selected.

How to make a frame around text in Word

In certain cases, you should know how to insert text in a frame in Word, and not around the entire page. This is an additional design technique that can help improve the perception of information. The program provides the ability to frame only part of the text to emphasize its importance. You can do this as follows:

Select the area to be decorated.
Go to the “Paragraph” main menu tab and select the “Borders and Shading” item.
Click “Border”, here you can enter all the necessary parameters for future framing.
In the “Apply to” line you need to set “Text”. If desired, you can assign a “paragraph” here and create a frame for an entire piece of the document.

How to make a beautiful frame in Word

Framing can be applied not only to official documents, but also to greeting cards. If you came up with beautiful toast or a poem for the birthday person, you can design it as a card and give it as a gift. Instructions on how to insert a frame in Word 2010:

Select the "Insert" section.
In the Illustrations group, find the Shapes button. When clicked, options for possible frames will be displayed.
Select the appropriate one and use the mouse to place it on the desired area of the document.
You need to insert the design on a blank document; it is impossible to do this on already written text.
Right-click on the shape, click on “Add Text”, enter the required content inside.

How to draw a frame in Word

In addition to standard tools, there are options on how to make a table frame in Word 2010. You yourself will draw the design boundaries as you see fit. The creation algorithm is as follows:

On the main menu tab, from the “Paragraph” group, select “Draw Table” (the button with a dotted square).
Set the required margins on the right and left.
The cursor will change to a pencil. Set it to in the right place, holding down the left mouse button, stretch the rectangle to the required size.
The result is a design that is essentially one large table cell.

Because this is a table, all Word commands will apply to the content. You can easily change the size of the frame or the thickness of the lines, or move its borders. You can move a cell horizontally or vertically. The contextual sections “Layout” and “Designer” will remain available to you, which provide the ability to adjust the position of the text and fill.

How to make a frame with a stamp in Word

For diploma or official documents, you not only need to insert a frame in Word 2010, but also design a place for a stamp. Creating a frame is described above; below are instructions for creating a typical title block:

First you need to insert a footer. To do this, find the bottom of the page, double-click on it, and the editor will open.
Go to the "Design" tab from the "Position" group. Change the value to 0.
Create a table with 9 columns, 8 rows via “Insert” -> “Table”.
Hold down the left mouse button and move the left border of the table to the edge.
Select all the cells, go to the “Layout” tab, select “Cell Size”, set the height to 0.5 cm.
Set the width of the columns one by one to: 0.7-1-2.3-1.5-1-6.77-1.5-1.5-2.
Combine cells as needed to create space for a stamp, signature, etc.

Video: how to create a frame in Word

Learn how to draw a mermaid, fairy, flowers. In the article you will find detailed description how to make frames with your own hands to frame drawings with them.

How to draw a fairy?

Children love the animated series "School for Witches", so why not show them how to draw a fairy. She might look like one of the heroines of this cartoon or it will turn out a little different, thanks to the artist’s imagination.

This flying sorceress is depicted against the backdrop of fabulous nature, which makes the picture even more mysterious and interesting.

It is better to start drawing such a fairy tale from the main geranium. When children learn to paint it separately, then they can easily transfer it to the canvas, where the background will also be depicted.

We begin to draw a fairy with a pencil by drawing a diagram. On the left, draw an oval, which will soon turn into the head of the heroine of the canvas. As you can see, the segments at shoulder level and the pelvic line are almost the same size and parallel to each other. Draw small circles on either side of these lines. Draw the same ones in the area of the elbow and knee bends, in place of the palms and feet. Draw a diagram of the torso, arms and legs using straight lines.

Further, magical girl It is drawn with a pencil step by step as follows. Draw rectangles around the body and pelvis. Keep your waist thin. Draw a hairline on your head. Next, below, draw 3 more slightly rounded lines. They will help depict facial features. 4 segments behind the back will tell you how to draw wings.

After all, at the next stage you will depict 2 upper and 2 lower wings, outlining these 4 segments behind the back of the sorceress. Also outline the arms and legs, based on the previously created diagram of these limbs.

Draw the palms and the flower she is holding with them.

In the next step draw her tight clothes, hair, facial features and see how to draw the wings next. The veins will help them become more realistic.

In the next step, erase the auxiliary lines and draw on the main ones if you accidentally erased them.

The final step of the fairy image is coloring. Children really like this stage. If it is difficult for them to draw a fairy with a pencil, then they will color it with pleasure.

Looking at the following photo, draw intricate lines. They will help us correctly place objects in the foreground and background.

We draw large mushrooms on the left, a large tree on the right. Here we will leave the place where our main character. Before this, you have practiced depicting it, so this should not cause any difficulties.

Drawings of fairies from a family familiar to children animated series Winx School could be the same. Draw the proportions of their body in the same way. Fairy-tale girls differ from each other only in hair color, clothing, and facial features.

In the next step, draw mushrooms, trees in the background and on the sides. So that you can clearly see how to do this, the following hint drawing was created using a red and blue felt-tip pen.

You will have it in a pencil. By erasing the auxiliary details, you will get this or a similar result.

All that remains is to paint the canvas and admire the end result. Here's how to draw Winx and other fairies from the famous cartoon.

Step-by-step drawing of a mermaid in pencil

Final result it might be like this if you colorize your sketch.

And the work begins with a simple drawing, with the help of which we will create the basis of the body parts. Since Ariel is sitting on a rock, we need to create a line of curves to show this. Draw it as shown in the photo, marking the lower part of the tail with two lines.

Create shoulders using straight section. Apply similar lines to the face of the aquatic beauty to then draw facial features here. To make them symmetrical, draw a vertical segment.

On next photo you can see how to draw Ariel's eyes, nose, lips and upper part of her clothes. Make her hair flowy with a few strokes of the pencil.

At the next stage, the extraordinary girl has a tail, a body, and arms. We outline the stone so that we can see what she is sitting on. All that remains is to erase the unnecessary lines of the diagram and leave the drawing as is or decorate it.

Now the fruits of creativity can be placed in a frame made by yourself, placed on a table or hung on a wall.

How to make a picture frame from cardboard?

You can make this one from scrap materials, taking an ordinary cardboard box of the required size. You can make a photo frame in the same way.

Below is a list of what is needed for this craft. This:

cardboard box;
stationery knife;
glue.

That, in fact, is all that is needed.

If you want to decorate your creation, use colored paper. Pasted with it ready product, on top of which you can glue buttons, coffee beans, shells and even pasta.

Take the box, lay it out, cut the corners as shown in the photo.

Now fold its four edges, also relying on visual cues. From two long sides glue on a strip of cardboard.

Fold the edges down so that they become voluminous and glue them.

You need to cut a rectangular hole in the center of the cardboard box so that you can then insert the design into it. But it should be a little smaller than necessary, since you will wrap the edge of the cutout inside.

Now glue the frame to cardboard box, and the self-made picture frame is ready.

You can do it differently - create a border for the picture from a solid box. Then unfold it, cut three sides shorter, and the fourth (E) just a little, on which you will place the design.

Fold the sides as shown in the photo, glue the parts, and another DIY picture frame is ready.

DIY baguette frame

Picture frame made from ceiling plinth - great option for those who still have this material after repair. From the remains you need to cut 4 strips - 2 of the same size in a mirror image.

Please note that the joints are cut at an angle of 45° so that when glued together they form a 90° angle.

Assemble a picture frame from plinth, put a picture in it, and glue a cardboard base.

You can leave the frame as is or decorate it, for example, by covering it with spray paint.

But unprocessed ones also look great. Allocate a wall space for children's drawings and hang their pictures, framing them in frames.

Not only images of cartoon heroines can hang on the wall, but also flowers that will decorate the space and look good in light frames.

How to draw flowers step by step?

It will be easy for kids to draw a sunflower if an adult shows them how to do it.

Have them draw a circle. It’s easier to do this by outlining an object of this shape, for example, a coin.

Next, the circle is framed by petals with a sharp outer edge.

First on one side, and then on the other side.

This was the first top row petals. Below it, in a checkerboard pattern, draw the second tier.

All that remains is to mark the stem, leaves with a pencil and color the sunflower.

And here is how a rose is drawn with a pencil and then painted in a bright color.

We will depict 2 blossoming buds, for this you need to take:

paper;
pencil;
eraser;
compass;
paints.

Using a compass, stencil or ruler with holes, draw 2 circles. In this case, one slightly overlaps the second. Then the connection point needs to be erased with an eraser.

Now you know how to draw a rose with a pencil and you can teach it to your children. Let dad act as a teacher, then the son or daughter will create such a drawing and present this gift to mom for her birthday or on March 8th.

They can also give their other creations, for example, to grandparents, and parents will first frame the drawings, placing them in frames that are quickly made from scrap material.

From the presented videos you will learn how to draw the characters of the cartoon “Smeshariki” a hedgehog and Nyusha, quickly make beautiful frame from cardboard for framing children's canvases:

In order for the photo to look unusual, the most the easy way is the framing of it by a frame. Nowadays such frames are extremely popular on the Internet. People use these frames to make their photos more colorful and interesting. Nowadays there are a lot of links for downloading frames, but in our lesson we will teach you how to draw a frame in Photoshop yourself. These tips and options given in the article will help you draw it correctly and without special effort. In the article, you will find the answer to the question of how to draw a frame, what is needed for this and what tools can be used to make a frame, as well as what program to use to achieve the best effect.

How to draw a frame in Photoshop

Open the photo of your choice in Photoshop. We adjust the photo to the desired size. Now we need to change the background color. In the menu on the left, select the background we need - the color of the frame. You can choose the color you want, whatever you want. Now we need to determine the size of our future frame. Go to the Image menu and select Canvas Size. Depending on the size of the source file, we make the dimensions of the frame. To do this, enter the values we need in the Width and Height fields and click OK. You can also play with the layer settings, click Background, double-click, enter the settings, determining what exactly we need, click OK, then the Stroke tab.

Second way

This method is undoubtedly more elegant. Now we’ll tell you how to draw a beautiful frame a little differently. Open the image, then:

To draw a beautiful frame, first we need to duplicate the background (Background), you can use the key combination Ctrl + J. This creates a new layer - Layer 2. Next, press the D key - reset the palette, that is, set the default color settings - this is usually black and white colors. Press the key combination Ctrl + Backspace to fill the second layer with white - Layer 2.
Then, in the dialog box, find the item canvas size - Canvas Size, you can call it using the Image menu, and increase the size of this document. Hold down the Ctrl key and click once on the picture with our 1st layer - Layer 1, if you don’t know where, it’s in the lower right corner, the Layers toolbar. We've just selected our entire layer. If this seems like a lot to you, then you can reduce the width and length of the selection areas by approximately as many pixels as you need. To do this, we press Select, then Modify and Contract, and choose what suits you. Now we need to add a mask to the first layer - Layer 1. Click once on our layer in the Layers toolbar and click on Layer Mask. For those who do not know and for those who have forgotten, let us remind you that at the very bottom there is a layers panel.
This is the very last step. And the most creative, so to speak. Photoshop filters will help us here, with the first layer mask - Layer 1. There are many filters, so there can be many masks. IN in this case Let's consider one option with which in the future you will be able to make various masks to suit your taste. To get this frame, we need to click once on the “mask” of the first layer - Layer 1. Apply the Spatter filter, this is in the Filter menu, then Brush Strokes, now Spatter again, with the settings you need. If you don’t like the result, you can cancel it with a simple Ctrl+Z key command. If everything is fine, then you need to run the Trim command, you can call it using the Image menu, then Trim, it is usually used to remove excess white space around the edges of a photograph (pictures, images ). That's it, the frame is ready!

02/07/14 96.4K

Quite often there is a need to visually separate an image from the surrounding text on a website and decorate wedding photographs.

There are many applications on the Internet for creating frames, but you can do it in almost any graphic editor. How to make a frame in Photoshop?

Let's look at a few of the simplest methods.

Ways to Create a Frame in Photoshop

Method number 1: stroke

Open a photo in Photoshop and select the image using the keyboard shortcut ctrl+a or using the selection tools by going to the "Edit" menu and clicking on the item " Stroke»:

Select the color, thickness and position of the stroke:

If the outer stroke position is selected, the image size can be reduced using the command " Free transformation", moving dotted line, or increase the size of your canvas by the desired amount.

Method number 2: frame around the picture as a background effect

Let's assume that the frame we need has a thickness of 2 pixels. If a picture opened in Photoshop has only one layer, then it is the background layer.

Press F7, double-click on the background layer, and when the Layer Style window opens, select the Stroke panel. The “Outside” selector must be changed to “Inside”. Having specified all the parameters you need, click on “OK":

Method number 3: using a brush

In order to make an arbitrary frame for a picture or a separate part of it, you can use a brush. Select with hotkey B brush and specify its thickness:

The frame color will be active in this moment color. Click the brush in the place where you will start drawing the stroke, hold down the shift key and, without releasing the button, draw a straight line.

Repeat this action three more times to all sides of the picture, and you get a simple stroke. Unsuccessful actions can be undone using the ctrl+z combination. The end result differs little from the first method, however, you can make such a frame not only along the edges of the image, but also in any part of the picture:

Method number 4: transparent frame

Open the image and duplicate the background layer twice using the keyboard shortcut ctrl+j. Turn off the top two layers by clicking on the eye icon next to each:

While on the first layer, select "Filter", "Blur" and " Gaussian blur" and blur the image:

Then in the “Filter” window, click on “Noise” - “Add noise”. In the layer blending options of layer 2, in the already familiar way, make a one-pixel black or white stroke.

Turn on the visibility of all layers and layer 2, using free transformation, reduce it along the contour by the required amount.

You will get a frame like this:

By experimenting with layering and blurring, you can create a beautiful and effective photo frame. However, sometimes it is necessary for a photograph to have a more complex or thematic frame.

In order not to reinvent the wheel, on the Internet you can easily find many different free .psd or .png files into which you just need to insert an image. How to do it?

How to insert a photo into a finished frame?

Step #1

Open the downloaded frame and photo in the same Adobe Photoshop project:

Step #2

Using the Move tool, drag the photo into the frame window. In order to synchronize images, in the "Edit" menu, select " Free transformation" and, holding down the shift key, resize the image to fit the frame and rotate if necessary:

Step #3

In the Layers window, place the frame layer higher than the photo layer, as shown in the picture.