How to draw an equilateral triangle in Photoshop. Draw a triangle in Photoshop

Drawing a cloud with a pen

A simple drawing lesson. How to draw anything with a tool Pen Tool(Feather). The tool is universal, it can do a lot, but non-professionals rarely use it. Why? They think it is difficult to learn how to use the Pen tool in Photoshop. Nothing complicated. Try this tutorial as an example.

How to draw a simple figure with a pen - a cloud or a small cloud? Or any other figure consisting of several curved segments. The easiest way is to create a simple and primitive rectilinear contour, and then “bend” its segments as needed.

Take the Pen Tool, click the Paths button on the options bar to draw a path without filling, and draw a shape like this, simply clicking in the right places with the pen:

The Path Selection Tool and Direct Selection Tool arrows, located on the toolbar immediately below the pen, allow you to move the path or its individual nodes. Use these arrows for editing if the outline you created is not entirely successful.

It doesn't look much like a cloud. Select the Add Anchop Point Tool reference point) from the Pen tool group and place an additional anchor point in the middle of some straight line.

In order for the straight line to bend, you need to pull outward by the middle, that is, by this additional point that we installed. Two guides extend from this point. If they are very short, the arc will bend steeply. To change the shape of the arc, grab the tip of the guide and stretch it. For the arc to be symmetrical, the guides must be the same length and located at the same angle to it.

Convert all straight segments into arcs as in the figure.

The result is a contour resembling a cloud. But a figure drawn in this way is not an image, but only a pattern that can be used to create an image. The outline is invisible in the picture. The created outline of the cloud can be filled with color or texture, or outlined with a pencil or brush.

Select white from the Photoshop toolbar.

Right-click anywhere on or near the outline. A context menu for working with the contour will open.

From this menu, select Fill Path. In the dialog box that opens, you can select the foreground or background fill color, Feather Radius, and layer overlay mode.

Here is the result - a nice white cloud is drawn:

What if the cloud should not be white, and you only need to draw the outline of the cloud? Undo the last action - filling the outline: History palette (History), one step back.

Select and customize the Pencil tool. In the Options Bar, set its thickness to 2 or 4 pixels.

Right-click to bring up the context menu for working with the path. From the menu, select Stroke Path.

In the window that opens, select the Pencil tool.

Click OK and get the result - the outline of the cloud outlined in pencil.

You can also use other tools for outlining, such as a brush. Each tool must be pre-configured.

Undo the last action - pencil stroke: History palette (History), one step back. On the toolbar, select the Brush tool and give it the following parameters:

Right-click to bring up the context menu for working with the path. In the menu, select Stroke Path (Stroke) and in the dialog box, instead of Pencil (Pencil), set Brush (Brush)

You will get this result:

If during the learning process you created a small masterpiece and want to save it for future use, then again right-click the context menu for working with the contour and select Define Custom Shape.

In the window that opens, enter a name for the shape and OK.

In the future, you will find your cloud in the section of ready-made vector shapes free form and you can use it whenever you need it.

Adobe Photoshop occupies a special place among users. This is a professional editor that has great amount functions. With them correct use You can retouch photos, create graphic illustrations, 3D objects and more. For beginners it will be difficult to immediately understand the most simple things, for example, how to draw a triangle in Photoshop. Or a beginner might have a hard time working with layers. You can find a huge variety of Photoshop courses on the Internet. They talk about the intricacies of work and are educational in nature.

triangle?

There are several ways to draw triangles. To do this, you should pay attention to the toolbar - everything you need is here. First you need to understand how to use the tools in Photoshop. Each item on the panel has its own special function. There are brushes, lines, magnifying glasses, magic wands and much more. The user should pay attention to the fact that one cell may contain different parameters. For example, in the eraser cell, you can find the Background Eraser and Magic Eraser tools by right-clicking on the tool. A graphic triangle can be drawn using the following tools, which will be discussed in the article:

• Line tool;
• Polygon tool.

Using the Line tool

In Photoshop using lines? Very simple. We select the tool of the same name; in the settings menu at the top you can adjust the parameters the user needs. For example, fill color, outline color, line thickness, stroke thickness and other items.

1. For arbitrary triangle. After selecting the parameters, draw the first line. From the end of the first we draw the second. Connect the end of the second and the beginning of the first line. In the layers menu, select the three resulting shapes (Shift + left mouse button) and by right-clicking, select the “Merge Shapes” item. Some may have noticed that during the process of creating a triangle, a small window popped up near the cursor with the degrees of the angle and the length of the line. Thanks to this small panel, the user can adjust the resulting triangle.
2. For rectangular isosceles triangle. You need to hold down the Shift key to draw a line. We draw the second line from the end of the first, adjusting the angle 45/90 degrees while holding Shift until the auxiliary ones indicate the right place stops. We connect these two lines with a third one.

Using the Polygon tool

The simplest command to draw a triangle in Photoshop. As mentioned earlier, the toolbar contains many different instruments. In the cell where the Line tool was located, there is a Polygon tool. When you select it, an editing panel appears at the top (as was the case with “Line”). There you can set the necessary parameters. Be sure to enter the value 3 in the "Parties" field.

By default, an equilateral triangle will be constructed, where all sides are 60 degrees. The resulting figure can be pulled out and pressed in to get the required form. To do this you should do next way"Edit" > "Path Transform" > "Scaling", or use hotkey Shift + T.

When I was a “teapot”, I was faced with the need to draw a triangle in Photoshop. Then I was unable to cope with this task without outside help.

It turned out that everything is not as complicated as it might seem at first glance. In this lesson I will share with you my experience in drawing triangles.

There are two (known to me) ways.

The first method allows you to draw an equilateral triangle. To do this we need a tool called "Polygon". It is located in the shapes section on the right toolbar.

This tool allows you to draw regular polygons with a specified number of sides. In our case there will be three of them (sides).

After setting the fill color

Place the cursor on the canvas, hold down the left mouse button and draw our figure. During the creation process, the triangle can be rotated without releasing the mouse button.

Result:

In addition, you can draw a shape without a fill, but with an outline. Contour lines are configured in the top toolbar. Filling, or rather the lack thereof, can also be adjusted there.

I got the following triangles:

You can experiment with the settings to achieve the desired result.

The next tool for drawing triangles is "Straight-line lasso".

This tool allows you to draw triangles with any proportions. Let's try to draw a rectangular one.

For a right triangle, we will need to accurately draw a right (who would have thought...) angle.

Let's use the guides. Read how to work with guide lines in Photoshop.

So, we read the article, let’s pull the guides. One vertical, the other horizontal.

To make the selection “attracted” to the guides, turn on the snap function.

Then right-click inside the selection and select, depending on your needs, context menu items "Perform Fill" or "Stroke".

The fill color is configured as follows:

The stroke width and position can also be adjusted.

We get the following results:
Filling.

To obtain sharp corners, the stroke must be done "Inside".

After deselecting ( CTRL+D) we get it ready right triangle.

These are the two simplest ways to draw triangles in Photoshop.

There are many areas in which you could apply your knowledge Photoshop programs. I can tell you with confidence that sometimes for two different areas the skills required are so different that it’s simply amazing. The designer may not even imagine how to retouch a portrait. And the photographer will have no idea how to work with rulers. But there are things that everyone should know. Like, for example, creating simple shapes. Let's figure out how to draw a triangle in Photoshop.

There are several ways to draw a triangle in Adobe Photoshop CS 6. Let's start with the polygon tool.

Let's create a new document. On the right, find the polygon tool and select it.

Now choose the color of the future triangle. On the same toolbar. This method will allow us to create a triangle filled with color.

And now on the top panel we set the number of angles of the triangle.

Now click on the work area and drag it out. The triangle is ready!

Let's look at another way. How to draw a triangle in Photoshop using a pen.

We return to the same toolbar. Select "feather".

Make 2 clicks on the work area and close the outline.

This method will allow us to make both a triangle filled with color and the outline of the triangle. Let's start with the outline.

Click on the drawn triangle with the left mouse button. In the drop-down list, select “stroke the outline.”

As you can see, a window has popped up allowing us to choose two options. Stroke with a brush or pencil. I'll use a brush.

Know that the outline will be outlined using the settings that were set in advance.

The stroke is completed. To remove the outline, select the pen tool again. Left-click to bring up the context menu. And select the “delete outline” command.

Now let’s figure out how to use a pen to make a triangle filled with color. Let's return to the outline. Click with the left mouse button. In the drop-down menu, select “create selected area”. And let's go to the sidebar, to the color selection tool we are already familiar with. We install the required one. On the same panel we look for “fill”.

Click on the selected area.

Removing selection using the key combination ctrl+d. The triangle filled with color is ready!

At first glance, it may seem that the second method is much more convenient, because we can choose any triangle shape. But in fact, the first method allows us to carry out any manipulations to change the shape. But that's a completely different story.

Adobe Photoshop is widely used for working with images, providing a truly wide range of possibilities. Most users use Photoshop for photo retouching, but, in addition, the program allows you to create: drawings, paintings, graphics - of varying degrees of complexity. Photoshop has several tools designed for creating drawings. The first step is to learn how to draw simple elements like triangles, lines, ellipses and others, since they are used very often when creating various types of drawings. In this article we will take a closer look at how to draw simple shapes in Photoshop. Let's figure it out. Go!

Let's understand the basics of computer graphics

With Adobe Photoshop open, look at the Tools panel. To go to the shapes, click on the rectangle icon. In the pop-up window you will see the following tools:

• "Rectangle";
• "Rectangle with rounded corners";
• "Ellipse";
• "Polygon";
• "Line";
• "An arbitrary figure."

The editor offers several classic and free forms

There are three drawing modes in total:

1. Created new figure, for which you can make a fill layer or a vector mask.
2. An outline of the figure is created and painted over with some color.
3. Pixel mode. In this case, the images are raster and not vector.

For each selected figure, geometric parameters are set, in other words, proportions. To draw a rectangle, select the appropriate tool, set the necessary outline settings and fill color. Now just place the cursor at the point on the sheet from which you want to start drawing. Hold down the left mouse button and drag the rectangle as needed.

There is nothing easier than drawing a line. The tool of the same name is used for this.

For a circle, use the Shift key or the additional settings menu

Let's move on to how to draw a circle in Photoshop. Here everything happens in a similar way. Select the Ellipse tool and decide on the color and thickness of the outline. If you want to get a circle rather than an ellipse, hold down the “Shift” key on your keyboard or set “circle” in the geometric parameters section.

We draw a beautiful composition using standard tools

Now let's figure out how to draw a triangle in Photoshop. In this case, everything is not so obvious, but at the same time it is not at all more complicated. All you need to do is select “Polygons” and in the small “Sides” window, set the number of angles. Accordingly, to get a triangle, enter the number “3”. Then everything is done exactly the same as in previous cases. Using the Polygon tool, you can create a shape with any number of angles. If you need a right triangle, draw a square and then cut off half diagonally.

Arrows at the beginning or end can be set in the tool properties

Let's look at how to draw an arrow in Photoshop. There are two ways to do this. The first is that you need to select the “Line” tool, then in the parameters window mark which side of the line the arrow will be on (at the beginning or at the end), then you need to set the thickness of the arrow in pixels. Place the cursor at the desired point and start stretching the line with the mouse. The second method is to select “Custom Shape”. On the top panel there is a table with templates, among them there is an arrow.

Templates included in the standard application package