Step by step drawing of a car. Drawing a car

Step one. Let's make a geometric shape of a parallelepiped (I hope you know what it is). Let's fit the typewriter into it. Step two. Let's sketch out the frame of the nine with light, long strokes.
Step three. Let's start drawing all the parts in more detail.
Step four. Let's add shadows for realism, voila - even better than in real life:

How to draw a truck with a pencil step by step

Step one. To begin with, we have to mark on paper the locations of the structural parts of the truck. Using straight lines we will sketch out such a frame.
Step two. Let's start drawing the body, cabin and wheels.
Step three. Let's add details: glass, mirrors, and other little things.
Step four. Let's remove the auxiliary lines using an eraser and add shading for realism. Here's what happened:

How to draw a carriage with a pencil step by step

Step one. Let's sketch out the location of the objects with lines.
Step two. Now let's sketch out the sketch. We will enter the necessary elements into each of the segments
Step three. Let's outline the contours more clearly, even add shadows.
Step four. Let's remove unnecessary lines and add shading. It turned out pretty good:

How to draw a sailboat with a pencil step by step

Step one. Sketch out a few lines that vaguely resemble a ship.
Step two. Mark the locations of the sails.
Step three. Draw the hull and other structural parts of the ship.
Step four. Next we have to more accurately draw all the elements and outline the contours.
Step five. Let's add shading, shadows, and draw waves from below.

How to draw a Lamborghini with a pencil step by step

Step one. Draw a polygonal shape to place the car inside.
Step two. We clearly highlight the body with headlights and hood.
Step three. We complete the body of the car, add wheels, side mirrors and other parts.
Step four. Add hatching and remove extra lines.

How to draw a Kamaz with a pencil step by step

Step one. Divide the paper into several square sectors representing different parts of the car.
Step two. In the appropriate squares, draw the car's wheels, body, cargo compartment and windshield.
Step three. First sketch out the front part, apply shadows, license plate, draw wheels and windshield.
Step four. Do the same with the other half, sketch it with large hatching.
Step five. Clean up the drawing and erase the extra lines with an eraser.
Step six. Add shading if necessary to make it look more realistic. This is how it should look:

How to draw Lada Priora with a pencil step by step

Step one. Draw the car body and front wheels.
Step two. Add headlights, rear wheels and other details.
Step three. Outline everything with a thicker line.
Step four. Shade and write Lada Priora instead of numbers.

How to draw a fire truck with a pencil step by step

Step one. Let's start small, select the area for drawing with a geometric figure, as in the picture below.
Step two. We sculpt the shape of the car, add three wheels in circles. At the top, use a short horizontal line to mark the place for the water cannon.
Step three. Let's round out the shapes and make softer transitions. Let's determine the centers of the wheels by drawing perpendicular lines.
Step four. The basic form is ready, now we just add all the accessories and elements: headlights, bumpers, doors, windows.
Step five. Let's darken the bottom of the car, create the image of tires with short lines around the wheels and finish adding various bells and whistles.

How to draw Boomer with a pencil step by step

Step one. Draw an oval circle.
Step two. Carefully turn the drawn pseudo circle into a car body. Using straight lines we highlight the structural parts: doors, hood, roof.
Step three. We make the shape more rounded and even, highlighting the windshield and door windows. We also carefully draw two wheels.
Step four. The main elements are ready, let's move on to the smaller details. Let's draw the headlights, bumper and side spoilers, side mirrors, and don't forget the steering wheel.
Step five. We draw the tires, create a shadow under the car, lightly shade the windows and hood.

How to draw a tractor with a pencil step by step

Step one

We will place large figures in the center of the sheet and set the shape and position of our drawing. There are two parallelepipeds - the tractor cabin, huge uneven circles - the wheels, and behind there is a trapezoid.

Step two

Let's outline the outline of the cabin and give it a shape. The large, uneven circles should become large, massive twin wheels. Behind, inside the trapezoid, we will draw buckets.

Step three

Let's draw the tractor cabin. Let's draw the pipe and the front part. Let's outline the wheels. Let's pay attention to the ladle.

Step four

Let's show what we can barely see inside the cabin. We will place all sorts of lanterns on top. Carefully examine all the details on the body and try to transfer them to your sheet. Inside the wheel we see a disk.

Step five

Since we have a tractor, the tires have high tread. The radiator trim and a few small things are missing. OK it's all over Now! The tractor is ready! Congratulations to you!

How to draw a sports car Audi S 5 Coupe

Step one.

Let's draw the body of a sports car.

Step two.

Let us denote the windows and the location of the wheels with lines.

Step three.

Let's erase the auxiliary lines. Let's outline the contours of Audi.

Step four.

Let's add doors and front bumper.

Step five.

Now the details. We draw the door handles, tank, rims, headlights and Audi brand badge.

Step six.

All that remains is to darken the front of the car using shading. This is how the drawing of the sports car turned out:

How to draw a bicycle with a pencil step by step

Step one

First, let's show the outline of the bike, its main lines. That is, you and I should get two oval wheels connected by a frame, a base for the seat and steering wheel.

Step two

Let's outline the oval wheels and make them wider. Let's show the steering wheel line smoothly. We will outline the existing seating base and give it a shape. From the saddle down we draw another line, draw the front sprocket and pedals.

Step three

Draw the thickness of the rubber. There is a wing above the rear wheel. Now let's turn to the frame and wheel fork. Let's design the saddle and show the seatpost. Let's move on to the steering wheel: here are the handles and the steering column.

Step four

Now let's pay attention to the details. We still don't have enough wheel rim with nipple. Next we draw the cassettes on the rear wheel and the chain. Let's draw holes on the star. Let's make the pedals voluminous. There are stripes on the bicycle handles. On the saddle we will draw a line separating its sidewall.

Step five

There is very little left to reach the goal. Namely, a box for a chain and spokes for wheels. Now you know how to draw a bicycle with a pencil. It's a shame you can't ride it. But I want to!

How to draw a bus with a pencil step by step

Step one.

Let's draw the base. It will serve us as a huge parallelepiped located in the very center of the sheet. That is, you need to remember a little geometry. By the way, if you remember about the “vanishing point” from the lesson about the room, then this is very cool. Because this trick works with the top and bottom lines of our bus. And somewhere far, far away they intersect.

Step two.

Let's draw the wheels. We remember an important rule: those objects that are located close seem large, those that are further away seem small. And if you look at an angle, then the visual effect is such that you see the circle as an oval.

• or parallel to the base of the bus,

• or parallel to the vertical lines of the bus itself

Step three

Let's divide the resulting windows into sections. Perhaps there are already passengers sitting inside.

Let's add rectangular headlights to our drawing.

Step four

We will make our drawing more voluminous and lively. For each line of the window we will make a parallel. We'll show the rims inside the wheels.

Let's remember the details: these are the wipers, the rear-view mirrors, the door, and the turn signals. Ready:

How to draw a motorcycle step by step

Step one

The first thing to do is draw a horizontal center line for the wheels. This way we will immediately give directions to our drawing. Now the wheels themselves. Let's outline the horizontal axes. The visual effect is such that we see them not quite round, but slightly elongated vertically. Moreover, the wheel closest to us is larger.

At the top is the angular outline of a motorcycle.

Let's connect the grain of the ear with a horizontal line.

Step two

Let's make the wheel closest to us three-dimensional. Let's show the width of the rear wheel tires and its wide fork. On the body of the motorcycle itself we will need to make a lot of straight reference lines, which we will need later. Look carefully at the drawing and try to do the same.

Step three

We continue to draw wide wheels. Above them are wide wings. Let's show the seat and front tail.

Step four

All the details of the two-wheeled friend need to be transformed from angular to smooth and graceful. We carefully draw out the details.

Step five

Let's outline the outline of the base and make it brighter. Here, our brainchild is already visible.

Step six

There are a couple of barely noticeable inscriptions on the case. But we noticed them and will draw them. Now we need to give shadow to some of the details located in the depths. Well, you're done!

How to draw a car with a pencil step by step

So let's get started.

Step one.

Draw an outline. All lines are smooth and smooth. Minimum sharp corners. We start drawing from the base, outline the top of the car, and then show the lines of the hood and windshield. More precisely, at this stage, these are auxiliary lines. We draw the wheels: what is located closer to us is a little larger than the one farther away. Step two.

Now we need to draw the windshield. In this case, we focus on the drawn auxiliary lines. Let's draw a rear view mirror. Step three.

From the hood we draw the side windows. At the same time, we will, as it were, continue the line of the hood to the trunk, and then we will draw the windows themselves and show the side-view mirror. We will draw a line along the side that will give relief to our car. Ahead, at the intersection of the auxiliary lines, we will draw the radiator lining: several almost parallel lines, and on the cross itself - the brand name of the manufacturer. Next we draw the headlights. In this case, again, we rely on our auxiliary lines.

Step four.

Draw the bottom and outline the bumper. Notice how we can see the wheels from under the wings. Let's show the doors. Go ahead. Step five.

On the hood we will show the lines of the body relief. Let's draw the cross of the Mercedes icon. Let's draw handles on the doors. Now you need to draw a picture on the bumper. The drawing should not be flat, but voluminous. To do this, on the one hand, we seem to repeat the contour of the figure.

The very last thing remains. Here you need to try: wheel rims. Let's draw both the cross and the arcs to show the wide tire and voluminous rim. Step six.

We erase all the auxiliary lines! Well, the car is ready! You can trace the outline!

Step one.

Let's draw the basic geometric shapes that will help us in the future. The first is an elongated ellipse. It is not located horizontally, but slightly at an angle. You need to place the figure closer to the left side of the sheet. We should still have some space left. From the ellipse we draw two lines to the side - the axis of the tail of the aircraft. Inside the plane there is a long center line. You can cheat and draw it using a ruler. Let's draw a small oval to our ellipse - the future turbine. So, the main defining parts are ready and we can move on.

Step two.

This step is more difficult than the first. As carefully as possible, starting from the turbine, we draw the contour line upward, drawing the contour of the windshield. Next we draw the roof, which should be parallel to the long axial line. We are gradually approaching the tail section. Here the tail axles should help us. Based on them, we need to draw a tail. Happened? Let's move on!

Step three.

We draw the second turbine of the engine, and then draw it in detail. Now we need to connect the body of the aircraft with a smooth line to the tail. We will show another almost horizontal line from the aircraft body at the rear. Step four.

On the body of our aircraft we draw another long line parallel to the axial one. Continue draw an airplane step by step - We depict the details as shown in the figure. Step five.

Along the long line we draw: a windshield, a hatch for landing and for an emergency exit, portholes. Step six.

Now we erase the auxiliary lines. Take a soft pencil or black felt-tip pen in your hands and trace the outline! Step seven.

The very last stage: coloring! It seems our plane is ready to take off!

STEP 1. As in the previous lesson, we first draw the elongated shape of the car. And also draw two lines, as shown in the figure, on which the windshield will later be located.

STEP 2. Next we make sketches of the future shape of the car. We start with the far left wing and then move to the right. Draw the wheels, hood and windshield. Sketch out the headlights. You can also roughly outline the location of the wheels using two lines, as shown in the figure.

STEP 3. Here we have to add a lot of details to the car. Let's start with the lower grille, spoiler and headlights. Then we move on to the trunk and wheels. You can depict the rims on the wheels that you like best, or copy them from our example.

STEP 4. We already have a good drawing of the car, however, that's not all. It is necessary to add more parts on the body and hood. Add some stripes also on the roof of the car, make ventilation holes. Draw a round shape for the tires.

STEP 5. It remains to add the finishing touches to drawing the car. Let's make the rear-view mirrors, draw the headlights, and start applying the pattern to the tires. You can also add wipers.

STEP 6. Erase the extra lines with an eraser and trace the remaining contours of the car. This is how it should work out for you.

STEP 1. The first step is quite easy. All you need to do is make an elongated shape for the future car. It should look like an oblong box. It even somewhat resembles a guitar or violin. Try to repeat exactly as shown in Figure 1.

But if you want, you can use a ruler to draw the car windows, and later round them off manually.

STEP 3. Start drawing the glass. The windshield comes first, the passenger side window later. Some Barbie girl or famous singer Debby Ryan might be sitting there. Next we draw the headlights.

STEP 4. On pencil drawing of a car we only see the car from one side, so we draw only one door and the running boards under the door. Add window frames. Don't forget to make a handle and a keyhole.

STEP 5. Move on to the hood. Draw two lines on the hood and a grille below. Next, outline the lining for the spoiler and the bumper.

STEP 6. We are all ready to go. All that remains is to draw the wheels of the car. Please note that the wheels are not round! Under the weight of the machine, they become a little flat at the bottom. It will look more realistic. Well, of course, the tires are not perfectly round.

STEP 7. And finally, we carefully draw the rims. Try to repeat it as in the picture, or you can draw your own version, so they can be of different types and shapes, for every taste and color.

STEP 8. Remove unnecessary auxiliary lines using an eraser and trace the contours. This is how it should turn out:

How to draw a train with a pencil step by step

Step one. Using long, drawn-out lines, we will create the figure of a train in motion with a small chimney on top.
Step two. Let's add a lot of wheels, headlights in front and other accessories of the locomotive.
Step three. Let's carefully draw every detail, especially taking a closer look at the wheels. Let's remove the extra lines.
Step four. Now let’s sketch everything thoroughly with a pencil, and most importantly, create a beautiful, lush smoke that comes out of the chimney.

How to draw steam with a pencil step by step

Step one. Draw the body of the ferry and the water line with straight lines.

Step two. We add a deck to our ferry, all sorts of antennas and gadgets. We complete the lines of the body so that they stand out more clearly.

Step three. Somewhere on the horizon we draw the earth, insert a pipe for the exhaust for our ferry, draw lines for the windows.

Step four. All that remains is to complete the windows in the already marked places, make some adjustments to the structure of the ship and its appearance, and, voila, the ferry is afloat. Take the helm, captain, we have a long journey ahead in the world of creativity!

Step five.

How to draw a helicopter with a pencil step by step

Step one. First we draw all the lines with a thin line. For this we can take a hard pencil. Let's determine the position of the helicopter and the angle at which we will look.

We draw an oblique triangle - this is the outline that determines the future aircraft technology. At the top of the triangle there is a continuation of the sides, and above them there is a curved line. This is the back of our helicopter. The angle facing us is the front.

Step two. Starting from a curved line, almost vertically upward or at a slight angle, draw a structure on which the main rotor will be located.

Step three. The task is not easy: let's draw the outline of the helicopter around the main triangle. The upper corners, “ears”, attached to the main device, will later turn into engine turbines.

Step four. Now we need to show the wings. We look at our main triangle: its side farthest from us is the reference line. Mentally, or perhaps with a thin line, draw a line parallel to it. And already on it are the wings of a helicopter. The wings will create additional lift, and this will increase the flight speed.
Step five. We draw turbines: large ones at the top and small ones under the wings. We carefully draw the nose of the helicopter on the corner of the triangle closest to us, and the wheeled chassis below. Step six. Using thin, barely noticeable lines we draw the windows, contours and corners of the body.

Step seven. Now let’s take a swing and draw a cross-shaped rotor. Step eight. Almost forgot about the tail. It is slightly visible because of the screw.

Step nine. Well, that's practically all. There’s just a little bit left: erase our supporting triangle with an eraser. And then, using a soft pencil, outline the outline of the main large parts. Coloring the helicopter is at your discretion.

Good afternoon, we continue to publish collections of various interesting pictures collected from all over the world. Since we are an Internet resource that carries knowledge in the fine arts, it will certainly be interesting for our readers and subscribers to see unusual and original pictures and photographs that people take or draw. This will help you develop your horizons and get ideas for your own artistic...

Good afternoon, today, as promised in the last lesson, there will be a lesson purely for boys. Today we will learn how to draw a jeep. Jeep is the collective name for all off-road vehicles, those cars for which the element is not asphalt and comfortable smooth roads, but their element is fields, forests, mountains, where there are no good roads, where there is no asphalt, but...

Good afternoon, boys, rejoice, today's lesson is for you! Today we are learning how to draw a truck with a step-by-step drawing of each element. This drawing is very simple, so even a child or a parent can easily draw it for their child. Our truck is rushing along the highway to do its delivery business. It's red with a van body, but you can make it...

Good afternoon, today we will learn again How to draw a car. This is our fourth lesson on drawing cars, we drew a Chevrolet Camaro, a Lamborghini Murcielago, and a '67 Chevrolet Impala. We receive many requests from our young artists to draw another car. And so, today we present a new lesson How to draw a car and...

In this lesson you will learn how to quickly draw a crossover car, step by step, with a pencil. A car in this class is slightly larger and heavier than other types of passenger cars, so the wheels of this car are higher and wider than those of ordinary passenger cars. For better off-road performance, this vehicle has a high suspension, which means there will be more clearance between the body and the ground. The modern streamlined design of the car body is not very easy to reflect in a drawing, so we will draw the car without additional design elements, only the base of the car body.
If you can do it right draw a car step by step with a pencil, you can then add additional design elements, such as an air intake and a spoiler, etc. The picture drawn in pencil can be colored with colored pencils in the penultimate step of this lesson.

1. Draw a simple general outline of the car

Draw a car not easy, so it is necessary to make the correct preliminary marking of the general contour of the machine. To make this task easier, draw two parallel lines 2.5cm apart. Divide these lines into two segments of 6 and 8 cm. If you draw a larger car, on an entire sheet of paper, then increase these numbers proportionally. At the same stage of the drawing, next to the straight lines, draw lines at an angle, and delete the first contour lines.

2. Draw the contours of the roof and wheels

Try to make exactly the same markings for the wheels as in my drawing. Note that the right front wheel is further from the vertical edge of the outline than the left wheel. And the contours of the wheels themselves are not square, but rectangular. The outline of the car roof is easier to draw, however, try to make it as accurate as possible.

3. We begin to draw the shape of the car body

First, it is better to draw the streamlined lines of the body shape along with the hood, and then start drawing the contours of the fender liners. Between the outlines of the wheels, draw the lower part of the car body. Don’t rush to draw everything at once, look carefully at car drawing again before moving on to the next step.

4. Body and wheel shape

Start this step by removing all the extra contour lines from the drawing. After that, start drawing the wheels of the car. You may not be able to draw perfect circles right away, so don’t press too hard on the pencil. Now start drawing the body parts, glass, headlights. Detailed instructions on how draw a car impossible to give, just be careful.

5. Finishing touches on the car drawing

Car wheels are difficult to draw because they have to be perfectly round and identical. But drawing disks is not difficult. Any symmetrical figure, such as a star, is suitable for drawing a disk. When you draw the car's side windows, don't forget to draw the side mirror. Draw the rest of the body parts at your discretion, the main thing is that you can draw the shape of the body and wheels correctly and symmetrically.

6. How to draw a car. Final step

If your drawing of a car is made using a simple pencil technique, then you must shade the drawing. This will give the car a three-dimensional appearance and volume. But, probably, any car will look more beautiful if it is painted with colored pencils. You definitely need to draw the road and the landscape surrounding the car, then your drawing of the car will be a real painting.

Sports cars have a more streamlined, dynamic design and a low stance. In addition, they have low and wide car tires. This is necessary for greater stability on turns and better traction of the car with the road. Otherwise, the design of a sports car is no different from that of a regular passenger car.

The tank is one of the most complex military vehicles in design. The most important thing in drawing a tank, as well as in drawing a car, is to draw its frame correctly.

Nowadays it is rare to see wooden sailing ships. But even now they are the subject of many drawings. On our website there are many lessons on drawing equipment, including cars. In this lesson we will learn how to draw a ship step by step.

Drawing an airplane is not that difficult, much easier than, for example, drawing a car. In order to draw an airplane, you just need to know some of the features of its structure. For example, military aircraft, unlike passenger aircraft, do not have a passenger cabin, but only a cockpit.

Let's try to draw a hockey player in motion, with a stick and a puck, step by step. You might even be able to draw your favorite hockey player or goalie.

It is better to draw a tram against the backdrop of a city landscape. Draw a road, cars, and if you wish, you can draw people getting on the tram.

An article about how to apply beautiful airbrushing to a car body. Nuances of technology for applying images to a car. At the end of the article there is a video of beautiful 3D drawings on the car body.

Advantages and disadvantages of airbrushing

The advantages include:

• The opportunity to demonstrate your own individuality, your hobbies, and catch the admiring glances of passers-by and other motorists with your car;
• The ability to use drawings to hide small body defects, cracks and scratches;
• The presence of a pattern on a car significantly reduces the likelihood of it being stolen. Few people would steal such a car, since it is easy to find later, and getting rid of the drawing is too expensive and expensive.

• High cost of work;
• After an accident, a car with a pattern is more difficult to restore;
• Selling a car with airbrushing is usually difficult, since not all buyers will like the design on it.

What tools are needed?

1. Airbrush. This is the main device that sprays paint under pressure onto the surface of the car body. This ensures precise and accurate spraying.
2. Compressor;
3. Connecting hoses;
4. Paints;
5. Different skins;
6. Varnish fixer;
7. Solvent and degreaser;
8. Polishing machine with different wheels.

Finding this equipment will not be difficult. All this is sold in specialized stores. Particular attention should be paid to paints. There are different types of mixtures available today, but beginning artists can use the 646 and 647 grades of universal paints and solvents, which can be used to perform a wide range of tasks. In principle, working with automotive paints is similar to working with conventional paints.

As a rule, drawings are applied to the hood, doors, trunk lid, front or rear fenders. If you really want, you can paint the entire car.

Complexity of the drawing

• First category. It includes simple graphic designs: different lines, patterns, stripes, elementary geometric shapes.
• Second category. In this case, the drawing is limited to one artistic object, the creation of which uses multi-component paints.
• The third category includes complex artistic drawings with several objects and a printed background. In this case, a wide variety of colors can be used. It is important for the master to mix the paints correctly and create a smooth transition of colors. If everything is done professionally, a simple car will become a unique masterpiece.

How to draw correctly

The paints used must be of high quality, durable and resistant to various atmospheric precipitations.

These are the basic rules of drawing. But it is important to strictly adhere to airbrush technology.

Main stages of airbrush technology

When the theme of the drawing is chosen, you should start developing a sketch. A collection of drawings, a graphics tablet, a camera, a laptop, and a scanner will help with this. If you are good at drawing, paper and pencil are enough. Using Photoshop, you need to apply a drawing to a photo of the car and add fragments of the selected drawing. That's it, the sketch is ready.

Then you should carefully study the nature of the image in order to choose the appropriate method of applying the picture. As mentioned above, each method requires its own tools. If it is “just a sticker” or a decal, then a stencil is enough. If you need to depict various complex objects with smooth color transitions, you will have to use an airbrush and brushes.

It should be remembered that it is important to place the drawing correctly, because what looks great on paper will not always look beautiful on the body.

The computer will help with this. The entire process of modeling and positioning the image on the car body is performed using a computer.

If you are an experienced professional, you can do all this manually. However, it should be taken into account that the body has a complex relief and shape. It has different protrusions and transitions that can affect the appearance of the design. Therefore, it is still better to enter the image into the PC, apply different versions of the painting, and nuances of the body geometry to it. Now images can be presented in three-dimensional form, which will allow you to carefully see and edit all the shortcomings.

If you are satisfied with everything, you can proceed to preparing the car body for applying the image.

Preparing the car

After this matting is performed. You only need to treat the top layer of varnish so that the paint adheres well to the surface. All scratches and small chips should be repaired. You can perform the work with special matting sponges that do not leave scratches.

All parts and elements not involved in the design must be covered with tape or paper so that paint or varnish does not get on them. The place where the drawing will be applied must be cleaned of dust and degreased.

Drawing process

The drawing should be applied carefully and accurately, excluding sudden movements. The hand must be held calmly but firmly to avoid smudges. Gradually (layer by layer) it is necessary to display the entire image. First, the base is outlined, and then new details are added.

Success in this matter depends on the correct settings of the airbrush. It is necessary to adjust the required line thickness and pressure supply.

At the very end, the finished drawing must be coated with several layers of varnish from a spray bottle so that the image is fixed. When the varnish has hardened, you need to start polishing. This is the final stage in the procedure of applying a pattern to the car body.

The durability of the design will depend on compliance with the technology and the quality of the materials used.

1. When drawing, work in a respirator with a high-quality air filtration system. This will help maintain health, because paints and varnishes are quite toxic.
2. In order for the design to retain its beauty for a long time, it is necessary to periodically apply protective agents to it. Be sure to buy protective and abrasive polishes. As a rule, if the technology has been followed, the image will last as long as the factory body paint.
3. If you want to delete the drawing in the future, some problems may arise. When applying temporary airbrushing, it can be easily removed using special washable paints. But you can’t get rid of constant airbrushing so easily. You will have to either repaint the car or cover it with a special film.
4. If the image occupies more than half the surface of the body, you will have to re-register documents for the car, since its color has changed.
5. Airbrushing is considered a multi-color car paint job. It should not copy the identification coloring or symbols of special vehicles. The fact of the presence of the image must be noted in the car passport.
6. If desired, airbrushing can be insured with CASCO. In this case, the insurance company will cover all costs of image restoration.

Let's sum it up

If you decide to decorate your car with some kind of design, you should carefully consider whether you need it. If necessary and you have certain skills, you can draw a sketch yourself and apply the design to the body. If you have never held brushes in your hands, it is better to entrust this task to professional craftsmen.

Video - beautiful 3D car body tuning: