Amazing paper sculptures. Master class "sculpture made of paper or paper-plastic" Volumetric sculptures made of paper

Each of us in childhood tried to make at least one paper airplane, crane or boat. At first glance, this seems like a completely childish activity. But Calvin Nichols, a talented artist from Toronto, Canada, has been doing this for 30 years. In his work he uses only scalpels, scissors and glue. What he creates from paper exceeds all expectations about the capabilities of this simple material.

It takes from one month to two years to create one work.

If you look closely, you can see in the dog's eyes who he is looking at.

The artist depicts not only every hair, but also conveys emotions.

To create a figure, first a rigid frame is made that describes the contours of the future figure. It gives the sculpture strength, and the main small parts are already attached to it.

The artist cuts the paper into thousands of small strips and assembles the sculpture by hand.

Wings are particularly difficult elements to perform.

To make the sculpture look three-dimensional, strips of paper are tightly laid in several layers.

When an artist works with white paper, it is important for him to consider the depth of each piece so that it creates the necessary shadow.

Calvin received an award for his work Bird of Paradise.

King of beasts.

“My passion for wild animals, nature, photography, design, sculpture, light and shadow has converged in one point - in my work. When I started in the 1980s, I had no idea what my work would look like 30 years from now.”

"Paper sculpture

or paper plastic"

Possibilities of paper plastic

1. Decoration of any children's holiday, especially New Year's - Christmas tree decorations and interior design elements, children's costumes and various masks.

Possibilities of paper plastic

2.Make original greeting cards for any event and teach this to your students.

Possibilities of paper plastic

3. Supplement your costume with decorative elements using the paper plastic technique, which will allow you to look individually unique against the backdrop of general standardness and sameness.

A little bit of history

Chinese chronicles report that paper was invented in 105. n. e. Tsai Lunem;

Rice. 1. Map of China in the 2nd century. BC.

Tsai Lun's paper recipe was as follows:

• crush mulberry fibers, wood ash, rags and hemp;
• mix with water and place the resulting mass on a mold (wooden frame and bamboo sieve);
• After drying in the sun, smooth this mass using stones.

The result was durable sheets of paper.

Rice. 3. The old way of manual

paper production.

Types of paper plastic

1. Origami ( translated from Japanese as “folded paper”) is the ancient art of folding paper models, which originated in Japan. It is very similar to crumpling paper, but in this case the folds and bends are not random, but are subject to the will of the artist, he himself decides where and when to make them.

Types of paper plastic

2. Quilling – paper rolling or paper filigree. This is the art of creating volumetric or planar compositions from strips of paper (Translated from English "bird feather" Originated in Europe at the end of the 15th and 16th centuries. In medieval Europe, monks created elegant medallions by twisting paper with gilded edges onto the tip of a bird's feather.

Types of paper plastic

3. Paper sculpture which is often called paper plastic (“plastic” from the Greek word "to sculpt" because in terms of the type of creativity it is more similar to sculpture than others and allows you to create semi-volume and volumetric compositions. In paper plastic, all products are hollow or empty inside; only their shells are created.

Materials and tools required for work:

• 1.Whatman paper ½
• 2. PVA glue.
• 3. Scissors.
• 4. Stationery knife.
• 5. Cardboard.
• 6.Compasses or any round objects.
• 7. Paper clips.

Safety Techniques

• Use the knife carefully, do not put your fingers under the blade,
• Pass the knife or scissors only closed (scissors – rings first);
• Be careful when working directly with paper, or rather with the edge of a sheet of whatman paper (you can cut yourself!!!).

1 Method. A crumpled piece of paper looks like mountains.

Model "grouse"

• Cut along the contour
• Making cuts
• We complete the elements with a punch
• Deflections in cuts
• Assembly

Model “Alyonushka”

Shape Analysis:

• a large cone of half a circle,
• at the bottom of which there is a geometric pattern.

Model “Alyonushka”

• The cylinder is the basis of the head.

Model “Alyonushka”

The face has the shape of a segment (half an oval).

Model “Alyonushka”

The small cones are the sleeves.

Model “Alyonushka”

• The hair is cut into strips, curled with scissors and glued to the inside of the head.
• The palms are cut out in the form of mittens, then the fingers can be cut through.

Model “Alyonushka”

A scarf is a curved triangle.

Model “Alyonushka”

• Buckets are cylinders.
• You can cut out the rocker arm, which will add completeness to your model.

Expert advice

• Whatman is the ideal paper for creating paper sculptures.
• Our industry produces white Whatman paper in accordance with GOST. It is dense and this allows you to perform operations such as bending, twisting, slits and cuts.

Expert advice

• Colored paper The one we have is too thin.
• Paper sculpture Can made from colored paper, but here you need to follow some recommendations:
• 1. Colored paper should be dense .
• 2. Should not be colored finished product in watercolor or gouache.
• 3.You can paint the product with paint from spray cans.
• 4. It is undesirable to resort to using a large
• quantities colors , in order to avoid fragmentation and diversity.

Expert advice

• Don't limit your creativity . Having mastered the techniques of working with paper, you can create your own designs based on them, perhaps more interesting and original.

• Try modeling yourself so that ready-made patterns do not deprive you creativity !!!

Conclusion

1. You were Interesting ?

2. You learned something new and interesting for myself?

3. You will use knowledge gained in your teaching practice?

"Paper sculpture

or paper plastic"

American artist from Los Angeles (Jen Stark) creates stunning geometric sculptures from paper, wood and other organic materials. Stark's works are beautiful and organic, and her arsenal is surprisingly simple: the artist uses only a ruler, a special knife and pencils.

The artist’s sculptures have an amazing hypnotic power – this is noted by regulars of Stark exhibitions. Bizarre patterns captivate viewers so much that they spend a long time looking at the color palette of each small masterpiece of the master.

According to the artist herself, she draws inspiration from natural forms and human anatomy. The work takes Stark a lot of time - sometimes the artist works on one sculpture for two weeks. However, this activity does not seem tiresome to her - on the contrary, Stark considers her work meditative and calming.

Jen Stark was born in Miami, Florida in 1983. Graduated from the Maryland Institute College. Stark's work is often exhibited in major art spaces in the United States, including the Museum of Contemporary Art in Miami and the Florida Museum of Art. The artist currently lives and works in Los Angeles. Paper sculptures are not Stark's only hobby. She devotes a lot of time to drawing and animation.

Perhaps the works of the sculptor can compete with the works of Stark in terms of complexity and “jewelry” of execution Rogan Brown. His works, united in the Paper Sculptures series, are characterized by minimalism, airiness and incredible beauty of the finished works.

In Japan, paper art such as origami, kirigami and similar sculptures have long been traditional. How amazing and delightful are the beautiful paper crafts arranged in three-dimensional compositions.
Sometimes it can be very difficult, or even impossible, for a non-professional to repeat them even using diagrams and master classes. But if you really want to do something like that, you start looking for compromises. While searching, I came across the author of the paper sculpture, Benja Harney. Benja himself successfully applies his favorite hobby in the commercial sphere, advertising, and mass media, so this is not a hobby for him, but a job. I really liked the idea of ​​this creativity; making a figure this way, in my opinion, is much easier than folding it using the origami technique.

The method is really not that difficult to master. At the graphic design department, we made layouts in this way, while almost no attention was paid to the technology itself. You draw the model, then draw its layout with all sides, leaving bends for fastening and connecting the sides. Remember that we all glued together the same cube or parallelepiped from paper in geometry lessons at school.

In design, more complex figures are glued together in this way, such as building models and other three-dimensional compositions. Of course, in such work, three-dimensional vision is very useful, but you can start with simple forms, gluing them together.

By applying layer after layer of colored paper, the composition becomes multi-level, volume is created, and the figures acquire three-dimensionality.

Benja was fascinated by this process during his studies, still in the same graphic design department, and now very beautiful paper models come out of his hands. They are so interesting and neatly executed that you can’t call them anything other than paper sculpture.

Benja Harney's work is somewhere on the border between design and art.

His works are original and attract attention. Large brands and famous people are showing interest in them.

For example, Benja made paper wings for the Sydney showcase of the luxury brand Hermes.

For Kylie Minogue's Australian tour, they came up with a pop-up book for her album.

Original art by Patty and Allen Eckman.

Artists first mix acid-free cellulose using raw cotton, all of which is placed in a mold, compressed by vacuum or by hand. In this case, excess moisture is gradually removed, but the drying process is very long. When the cast is removed from the mold, then the finishing process begins, the most delicate one. Some details are removed, some are added, which ensures very fine detailing.

This is a very lengthy process, sometimes taking months of work. In some ways it is similar to the bronze casting process. The finished product is white, very light and with many fine details.

Calvin Nicholls is a unique artist and sculptor. His sculptures (which can be called three-dimensional paintings) are created from ordinary paper. Paper cut and glued in a special way creates amazing detail in the works. Calvin mostly creates paper portraits of wild animals - bears, lynxes, monkeys, birds and others.
Each voluminous creation takes a lot of time and painstaking work. The first step is to create a rigid skeleton, which is the outline of the future figure. The frame gives the work strength. All other small parts are already attached to the frame. Each piece is cut and textured using an assortment of metal and wood tools. During the work process, the sculptor constantly monitors the light and shadow on the sculpture. Having completed the main part of the work, the author creates an even more detailed and complex image using studio lighting. At this stage of work, all the nuances of the sculpture are completed.
And finally – photography.

Peter Callesen sculptures from a single A4 sheet

Danish-born artist Peter Callesen creates incredible works of art from a single A4 sheet of paper. Through a surprising combination of cutting and folding, Callesen creates incredible scenes from the simplest of materials.
In his own words, by eliminating all information and starting from scratch on a blank white A4 sheet, he feels that he has found material that everyone can relate to. At the same time, the A4 sheet is neutral and open to accept any meaning. The thinness gives the paper sculptures a fragility that highlights the tragic and romantic theme of his sculptures.