E flat tuning. Guitar tuning

In addition to the usual way to tune a guitar, there are alternative tunings.

Guitarists need them to diversify their performance and achieve an unusual or powerful sound, and also to simplify finger placement while playing. If you have problems with the setup process, there is a separate section about this on our website.

In this article, the tuning will be indicated from the sixth string to the first. Some settings are easier to remember this way.

Classical tuning and its variations

EADGBE - classic tuning

The generally accepted system, also called “Spanish”, is most often used to write songs. As an example, consider Ed Sheeran - Shape of you. Ed plays this song in classical tuning.

Variation one - DADGBE

Among guitarists it is called a drop-D, since the sixth string drops a tone to the note D. In it, power chords are pressed with one finger, which is why drop-D is often used in rock music.

Turns into this:

Stockholm Syndrome by Muse is played in this tuning.

Variation two - DADGBD

Also called Double drop-D, similar to the previous one, but the first string is lowered a tone down. It is convenient to play parts through the repeated note D, both on the sixth and on the first string. Skillet's Circus For A Psycho plays the main riff in this tuning.

Variation three - DADGAD

Among guitarists it is called “deadged”, often used in folk music because of its ease of imitation of bagpipes and sitar. Open strings do not form thirds, so this tuning is neither major nor minor, but modal. The first, second and sixth strings are lowered a tone. White summer by the Yardbirds plays just like that.

Drops and capo

Next, we will consider tunings formed by uniform changes in all strings from the classical tuning and its variations. The downward movement adds “heaviness” to the sound. The vocalist may be more comfortable singing. As the tuning goes down, it is better to switch to thicker strings; their tension will decrease and it will be uncomfortable to play.

Step one - D#G#C#F#A#D#

It’s also half-step-down, “half a step down.” All strings are evenly lowered by a semitone.

Guns`n`roses play their classic Sweet Child O`mine a little lower than it might seem.

Step two - CGCFAD

Popular in metal and hard rock drop-C. This is the tuning that is almost always used, with all strings down a tone and the sixth string down another tone, i.e. one tone down from drop-D. The first two albums of the band System of a Down were played at drop-C. For example, the song Toxicity from the album of the same name.

Step three - BF#BEG#C#

Another tone lower than the previous one, also known as drop-B. Even harder and more aggressive. Slipknot used this tuning on their first albums. Wait and bleed is no exception.

We will not consider lower tunings here, since in modern music, to lower them even further, guitars with additional strings, 7-, 8-, 9-strings, are used.

Capo

To improve the tuning, the guitar is very rarely retuned; for this, a capo is used, which evenly clamps all the strings.

This creates a movable threshold, and if you need to play a song in a different key, for example, for the convenience of the vocalist, you just need to move the capo to the desired fret.

For example, the Scarborough fair by Simon and Garfunkel is played with a capo at the seventh fret, which creates a BEADF#B tuning 3.5 steps higher than the classic one.

Open formations

Open tuning is the tuning of all strings not by intervals, but by the notes of a chord.

Such tunings are often used in folk music and when playing with a slide—usually a metal or glass cylinder that is placed on the finger of the left hand. It is moved along the strings as a “moving” fret.

Let's look at some commonly used open tunings.

Open D major Open D - DADF#AD

We have already discussed the DADGAD tuning as a variation of the classic tuning. Let's lower the third string another half step - we get the notes of the D major chord.

For example, let's take the composition of guitarist Alain Johannes - Make God Jealous.

Open D minor Open D Minor - DADFAD

Let's lower the third string another semitone, and we'll end up in D minor, a more “sad” chord. Let's evaluate the changes in sound using the song Wine and Roses by John Fahey.

Open G major Open G - DGDGBD

Let's return the second and third strings to the classical tuning, but lower the fifth a tone - we move into a G major chord. This tuning was used by Jimmy Page in Led Zeppelin's Bron-Y-Aur Stomp.

Modal scale G Modal G - DGCGCD

This tuning has the same features as the modal tuning D (DADGAD) discussed above; it is convenient to play both major and minor songs. Jimmy Page also used this tuning. He generally used many non-standard tunings and was their popularizer. For example, Rain song performed jointly with Robert Plant.

Open G minor Open G Minor - DGDGA#D

By lowering the second string a semitone, we form a G minor chord from the open strings. It is used on guitarist John Renbourn's Mist-Covered Mountains of Home and imitates a lute.

Open A major Open A - EEAAC#E or EAC#EAE

There are two setup options. In the first case, we raise the second, third and fourth strings by a tone, forming an A major chord.

In the second case, lower the second string by a tone, the third by a tone and a half, and the fourth string by a half tone. This variation is often found in delta blues compositions, one of the earliest blues movements.

Robert Johnson uses a slide to play in this tuning on Crossroads Blues.

Open C major Open C - CGCGCE or CGCGGE

The sixth, fifth and fourth strings repeat drop-C, the second string is raised by a semitone (or lowered by two steps), the third and first - as in the classics.

Chris Cornell's song Burden In My Hand, performed by Soundgarden, is written in this tuning.

There are many more rarer customization options. Nothing prevents a musician from tuning the instrument the way he wants or needs.

Come to us and we will teach you how to play the guitar and find innovative solutions to musical problems.

If you have already decided to start playing the guitar, then the first thing you need to do when you pick up the instrument is to tune the guitar. About how it is carried out 6 string guitar tuning and this article tells the story. Let's look at how to tune a guitar with and without a tuner. Never play an out of tune guitar - it will completely damage your hearing!

Standard guitar tuning

Tuning a guitar requires each string to sound a specific note. The set of notes of all strings is called the tuning of a guitar. Tuning a 6-string guitar can be done in different tunings, but we will focus on the most common - classical tuning, which is more often called standard guitar tuning.

In short, any tuning is written as a sequence of notes of the open strings from the first to the sixth. The standard tuning is written like this:

E B G D A E

What does it mean in Russian:

Mi Si Sol Re La Mi

As you can see, the first and sixth strings sound the note Mi , but in the case of the sixth string it is Mi second octave (thick string), and the first string produces Mi fourth octave (thin). There will be more about this a little later.

Guitar tuner

In the age of technology, it would be strange if there was no gadget for tuning a guitar. But it exists and there are just a lot of options. Not only is this a very convenient thing, it is also very cheap.

This is a small clothespin that attaches to the headstock, i.e. to the place where the pegs are on the guitar. The clothespin contains a sensor that detects sound vibrations going about t strings Thanks to this, the tuner does not pick up external noise.

We will look at what these strange letters on the screen are, but for now I want to please you. The cost of this miracle on AliExpress only 3$. In music stores, such tuners are sold many times more expensive. I recommend purchasing it if necessary. It will come in handy, I use this myself. It's better to buy in this store .

Tuner for tuning a guitar on your phone

Today there is more than one online service for tuning a guitar. There are also quite a few programs for PCs, for example Guitar Pro allows you to do this. But it is much more convenient to install the application on your smartphone and not depend on the Internet and/or computer.

There are tons of guitar tuning apps for smartphones. But the most complete and advanced among them all was and remains to this day the gStrings guitar tuner. I've been using it for 5 years now.

You can download it from Google Play Market ‘ A.

After all the changes made by the developers, the application has become maximally adapted to living conditions. You just need to take your phone out of your pocket, open the app and start plucking strings, not necessarily guitar strings. The application is omnivorous and is great for tuning a guitar, as well as for tuning a bass guitar, violin and any other instrument. Even the drums were once pulled up on it.

At the top of the tuner screen are consecutive notes. In the center is a tuned note, and an arrow indicates what to do with this note. If the arrow is to the left of the center of the screen, it means the note is not played. If it’s to the right, it’s overtightened.

A note is considered tuned if the arrow points to the center, i.e. on the note itself, while its color changes, in this case from gray to white. Today, all tuners have a similar intuitive interface.

As already shown above, notes are indicated by the first letters of the English alphabet. The letters go as in the English alphabet, in order, but starting with the note A:

• Do - C
• D - D
• Mi - E
• Fa - F
• Salt G
• A - A
• C - B

When talking about standard tuning, octaves were mentioned. Which octave a note belongs to is indicated in the program by a number next to the note. Under the note, its frequency is indicated in Hertz (Hz). The current sound frequency is shown in the center of the screen. For standard tuning this is:

• 1 string — E 4 — 329.63 Hz
• 2nd string — B 3 — 246.94 Hz
• 3rd string — G 3 — 196.00 Hz
• 4th string — D 3 — 146.83 Hz
• 5 string — A 2 —110.00Hz
• 6th string — E 2 — 82.41 Hz

Don't get confused! Otherwise, at best you will break the string, at worst you will damage the guitar.

Tuning a 6 string guitar by notes

Today, given that everyone has a smartphone or two in their pocket, this option for tuning a guitar can be considered outdated, but you shouldn’t write it off. One way or another, everyone who plans to continue playing the guitar should know it. You never know, suddenly the battery on your smartphone runs out)

The method is based on the fact that each subsequent string is tuned to the previous one by ear, by resonance. As we already know, the open first string produces the note Mi. If we hold down the second string at the fifth fret, we will also get the same note Mi and a resonance will arise between them, i.e. they will begin to enhance each other's sound.

This means that in order to tune the second string, it needs to sound the same as the open first string at the fifth fret. Therefore, we clamp the second string at the fifth fret, pluck the first string, and then the second, and try to determine whether the second string sounds higher or lower.

At the same time, to make it easier to determine whether the second string is understretched or overtightened, you can move from the fifth fret to other frets and look for which fret the resonance will occur on. If it occurs on higher frets (6,7,8...) then the second string should be tightened even more. If resonance occurs if you hold the second string at lower frets (1-4), then the second string is overtightened.

Guitar beats and tuning

When you come very close to the desired note and the difference between the notes is very close, so-called beats occur. Beating is the result of a slight difference between two close frequencies that are trying to resonate, but because of the slight difference, the sound is either strengthened or weakened. Graphically it looks like this:

When tuning an acoustic guitar, the beats are not only perceptible by ear, but also clearly felt by the body when touching the soundboard (body) of the guitar. This is especially noticeable on the upper bass strings, due to their thickness and lower sound frequency.

The closer the sounds of two notes correspond to each other (the second string on the fifth fret and the open first), the faster the beats will occur. And when the notes coincide, the beats will stop altogether. You just have to feel it and then you can adjust it without thinking.

By analogy for the other strings. The third string should sound the same as the second open string when plucked at the fourth fret. To tune the 4th, 5th and 6th strings, you should clamp them at the fifth fret and compare their sound with the sound of the previous string.

It turns out that all strings except the third are tuned according to the resonance between them at the fifth fret and the previous string, and the third string is similar, but is clamped at the fourth fret.

Sheet music for guitar tuning

This way you can tune the guitar in reverse order or starting from any string, but there is one weak point in this method. Initially, one of the strings must be tuned from outside. The tuning fork was invented for these purposes. A standard tuning fork produces an A note with a frequency of 440 Hz. Those. This is the first string on the fifth fret.

Especially for you, a 20-second file with the note A (440Hz) produced by a standard tuning fork was created in the Audacity audio editor. Well, at the same time, 20 seconds of the sound of the first string.

Download or listen online sheet music for guitar tuning:

You can create the sound of any note yourself in Audacity. How to do this, read the article:

Another instrument, such as a piano or a second guitar, can also serve as a reference. But it’s better to memorize some melody for yourself, preferably using all the strings separately, by playing which you could accurately determine whether the instrument is out of tune and which strings should be tuned.

For me personally, such a melody is the introduction of Viktor Tsoi’s song “Aluminum Cucumbers.” If you develop auditory memory and remember the sound of notes, then you can tune a guitar without a tuning fork, and even more so without tuners, without any problems. It just takes practice and regular play.

And finally, a video showing another guitar tuning option:

The article was written exclusively for the site

And he even posted it, albeit in English.
In general, today I decided to touch upon this topic again and consider the most common of them.

It wouldn't hurt to remind you of simple things. If you decide to tune lower, then it is better to take a thicker one, otherwise in some Dropped the usual nine will just dangle and ring on the frets. If you decide to make the tuning of your guitar higher, then in this case you can take thinner strings, because Large gauge strings, in this case, can be very tight. Well, no one has canceled the excess load on the bar either.

Also, if there is a radical change in the system, be prepared to do it again, although you may not have to do this.

So, let's go.

Standard tuning: E-A-D-g-b-e

In standard guitar tuning, all string intervals are perfect fourths (five semitones), except for the interval between the third string (g) and second string (b), which is a major third (four semitones).

Down a semitone: Eb-Ab-Db-gb-bb-eb

This guitar tuning is also called "Eb" - based on the note to which the thickest string is tuned. Tuning the guitar is exactly the same as in standard tuning. The sound intervals between the strings remain exactly the same, but each string is tuned exactly one semitone lower than the standard tuning. Eb tuning can be used for many reasons, such as making the strings softer and bending easier, or to better suit a singer's vocal range. There can be many reasons. This tuning was used by Jimi Hendrix and Stevie Ray Vaughan.

Down a whole tone: D-G-C-f-a-d

This tuning is also called “Tuning D” - based on the note to which the thickest string is tuned. Everything is the same as in the previous case, except that each string is tuned a tone lower than the standard tuning. This tuning is used for the same reasons as "E?", it causes the strings to sag even more and makes bending even easier. At this point I would think about using thicker gauge strings.
If this is not enough for you, then you can continue further. Those. lower or lower each string at an equal interval relative to the standard tuning. The algorithm is simple, the main thing is to choose the appropriate size strings.

Drop-D: D-A-d-g-b-e

Drop-D is probably one of the most popular tunings in hard rock, alternative and other motherfuckers. By the way, folk guitarists do not disdain them either. Although they are generally big fans of alternative and non-standard guitar tunings.
By lowering the low E string one step to D, we can make power chords easier to play. Now they can be played with one finger, simply by plucking three thick strings, the 4th, 5th and 6th, respectively. Drop-D tuning gives a meatier sound and extends the overall range of the guitar towards the bottom compared to standard tuning.
By the way, this system does not require a large and lengthy restructuring, which allows you to change the system right on the fly, with the proper skill, of course.
To facilitate this procedure, a special device was even invented and made - the D Tuner, which will allow you to literally rebuild the sixth string in a second.

Double Drop-D: D-A-d-g-b-d

Double drop D is Neil Young's favorite tuning. It is identical to the regular Drop-D, except that the high e is also lowered one tone from the standard tuning - to d. With this setup, it turns out that the 4th high strings form a G major chord, and this can be convenient when playing with a slide. This tuning is also quite quick and easy to get from the standard one.

Drop-C: C-G-c-f-a-d

This tuning will help make your guitar sound lower and meatier when overdriven. This tuning is obtained if you first tune the guitar a tone lower than the standard one, and then lower the 6th string another tone.
Quite low, don't you think? With this tuning, thicker strings are clearly needed. Thin ones will obviously hang around like snot.
In general, the technique is simple. We already understand what Drop is. But whether to lower it by one tone, 2 or more - that’s up to you. Everything will depend on the gauge of the strings and your desire.

Tuning D5: D-A-d-d-d-d

This tuning is classified as an open tuning, because If all the strings are open, the chord D5 sounds. This tuning is quite often used when playing slide. To get this tuning you need to lower the 3rd string by 5 semitones, raise the 2nd string by 3 semitones and lower the 1st string by a tone.
There are variations of this tuning in which the 3rd string is raised to A instead of lowered to D. This gives two fifths of a step in different octaves, which gives the sound some depth.

Ostrich formation: D-D-d-d-d-d

In this tuning, all strings are tuned to the same note. Lou Reed is said to have invented this tuning while he was with the Velvet Underground. Important note: With this tuning, you will definitely need to build your own set of strings.

I guess I'll stop for today. Of course, all alternative and non-standard guitar tunings are not limited to this.
I think I’ll throw in a dozen more soon.

One of the problems that every guitarist faces while learning is choosing a guitar tuning. Guitar tuning is determined by the sound of open strings; accordingly, the transition to one or another key is accomplished by tuning the strings to the appropriate notes. Below is a list of the most widely used tunings:

. "Spanish" or standard. This tuning is considered a classic. This is where mastery of playing technique begins. Many people continue to play it after completing their training, since this system is universal. Designation - EBGDAE, according to strings (1st to 6th).

Drop D. One of the popular tunings, often used in rock music, especially by hard rock performers. Literally translated as "lowered D". The reason for this name lies in the fact that in this tuning the 6th string sounds a tone lower than in the standard tuning, that is, it corresponds to the note D (D). This type of tuning sounds best on an electric guitar.

Drop C. This guitar tuning, like the previous one, is based on the fact that the sixth string sounds a full tone lower than the first. However, with Drop C, strings one through five are first tuned exactly one step down from standard tuning. That is, we get DAFCGC. In this tuning the guitar sounds lower and heavier. Used primarily in heavy music.

Open D. This tuning is most often used when playing slide guitar.

High and low tunings. Often musicians lower or raise the guitar tuning by a semitone, a tone, or even more. All strings can be tuned the same or differently. However (especially classic ones) when played in high formation they are at risk of getting damaged.
. Instrumental structure. Implies a standard tuning for another instrument. You can tune it like a balalaika, charango, or cithara.

I would also like to mention that the guitar, unlike many musical instruments, is not tuned in fifths. Why, despite the fact that the fifth gives the purest and most pleasant sound, is the guitar tuned in such an incomprehensible, at first glance, way? The answer to this question is more than simple: standard guitar tuning provides the greatest simplicity and ease of play.

Where to start? Naturally, with mastering the technique of playing in the classical (Spanish) system. Only after studying musical literacy, especially chords, will you be able to choose in which tuning it is more convenient to play this or that chord, this or that song. It is worth noting that it will be much more difficult for a beginner to play in an alternative formation, especially if he does not know the barre technique.

If you play or plan to play in the future, you should pay special attention to the geometry of the neck, especially the height of the strings. The guitar may need to be re-tuned to avoid loose strings and rattling when played in the new tuning. Beginner electric guitars are not designed to play in alternate tunings and may not sound as good as a Drop C guitar. Be sure to take this into account when purchasing!

Tuning an electric guitar is a complex process that is very difficult for beginners to master. The fact is that an electric guitar is a complex instrument, the tuning of which is not limited only to tuning the strings; in comparison with a regular guitar, the process of tuning an electric guitar is more complex and requires more attention. Also, if you just purchased a new guitar, then you need to fully tune it, otherwise the instrument will not sound, it will sound bad on high frets.

Well, if you're ready, then let's get started. First of all, we will clean the electric guitar from excess dirt; the fact is that over time, dirt forms on the frets, which, as you understand, does not contribute to the purity of the sound of your instrument.

Preparation

So, we take the guitar and carefully remove the strings (as mentioned above - to remove dirt), first remove the first, then the sixth, then the fifth and the second. This sequence is necessary to prevent the bar from being pulled to the side..

After the strings are removed, check whether the pegs are screwed to the electric guitar well; it often happens that they are loose, thereby your guitar is constantly out of tune and sounds bad. Tighten the bolts on the pegs so that the pegs are stable and do not wobble.

Now we take a dry one (under no circumstances take a wet rag, moisture is strictly contraindicated for an electric guitar) and carefully wipe the frets on the fretboard, removing all dried dirt, if any. Your guitar has most likely been hanging in a store and dirt may have accumulated while it was there, so cleaning is necessary even for a new instrument.

Before installing strings (preferably new ones), carefully treat all the bolts on the bridge with graphite lubricant or, if you don’t have one, you can use machine oil. This is done so that the bolts do not rust and in the future it will be convenient for you to adjust the scale. After all the above operations, install the strings. Place the strings in the same way as you removed them: first the sixth string, then the first, fifth, second, fourth and third. You need to put it in exactly this order so that, as already mentioned, you do not bend the bar to one side.

Strings

After the guitar is cleaned and the strings are set, the first thing you need to do is tune the strings (it is advisable to start with the standard ones, i.e. E,A,D,G,B,E,). At the end of the article, we will also talk about the lower tuning of the guitar, so don’t worry, but use the standard one for tuning.

You can tune the guitar using a tuner (it is advisable to use this method the first time, in order for the tuning to be as accurate as possible), using a program on a personal computer -, and you can also tune the guitar by ear -.

An anchor is a metal rod that is located inside the neck of an electric guitar and prevents its deformation. At one end of the anchor there is a nut for adjustment. Before you start adjusting the truss rod, you need to check the bend of the neck:

• press the fast string on the first fret and the same string, but only on the seventeenth fret;
• look at the gap (distance from the string to the frets), it should be no more than 0.3 mm;
• if the gap is large, then tighten the anchor nut; if there is no gap, then loosen the nut accordingly.

If you do not understand the principle of operation of the anchor, then it is better not to touch it; adjusting the scale and strings will be enough.

Mensura

Let's move on to setting the scale. The scale is the length from the bridge to the nut of your instrument. Its tuning is necessary so that the electric guitar, on the upper frets, sounds in accordance with your tuning, and not “all differently.” If you have encountered the fact that the guitar on the upper frets does not sound or quickly goes out of tune, then know that it is not tuned, namely, the scale.

Steps for setting up, standard tuning (to adjust the scale length you will definitely need a tuner):

• we play the first open one, the tuner should show the note E (E), we play the same string on the twelfth fret, the tuner should also show the note E (E);
• if the tuner shows a sound higher than required, then slightly tighten the bolt on the bridge; if the tuner shows a sound lower than required, then, accordingly, loosen the bolt a little;
• again we tune the first, open, string and then repeat the entire operation described above until the string and scale are tuned;
• This way we adjust the scale on all strings.

Build

Most modern bands playing heavy music use lower tuning. Drop tuning allows you to play lower chords on your electric guitar. This allows you to make the guitar sound more “heavy”, which is typical for metal bands..

The following are mainly popular:

• Low tuning D-Sharp Standard (D#) (adjustable - D# A# F# C# G# D#);
• Low tuning Re-Standard (D) (adjustable - D A F C G D);
• Low tuning C-Sharp Standard (C#) (adjustable - C# G# E B F# C#);
• Low tuning C-standard (C) (adjustable - C G D# A# F C);

Drop tunings

Also very often used are so-called DROP tunings. When playing this tuning, the guitarist plays the fifth (rock chord) with one finger, which makes playing complex parts much easier.

• Drop tuning D-Sharp (D#) (tuned - C# G# C# F# A# D#);
• Drop tuning D (D) (adjustable - C G C F A D);
• Drop tuning C-Sharp (C#) (tuned - B# F# B E G# C#);
• Drop tuning C (C) (adjustable - A# F A# D# G C);

In order to tune your electric guitar to the required tuning, simply lower the tone of your strings to the required note; for these purposes, it is best to use a tuner.