How to make a landscape from leaves. How to make a panel of autumn leaves with your own hands


Collecting beautiful leaves on a fine autumn day is a most exciting activity. And when you return home, you want to somehow preserve this splendor or use it to create something beautiful - the material simply begs for it! The most interesting thing is to make various compositions and applications from colorful autumn leaves. This type of creativity develops the child’s fantasy and imagination. In it, images can be created from ready-made shapes by simply placing them on top of each other, rather than cutting them out of paper. And the color palette of leaf fall will put any largest set of colored paper to shame!

YOU WILL NEED:
Colorful autumn leaves
Multi-colored cardboard or velvet paper
PVA glue (you can use starch glue or rubber glue)
Brush
Scissors
Tweezers
Oilcloth

DRYING AUTUMN LEAVES

Applications can be made from either freshly picked or dried leaves. If you want to preserve the leaves, two drying methods can be recommended.

The first, well-known, method is to insert leaves between the pages of an old unnecessary book. It is better to lay each leaf on both sides with a paper napkin.

The second method is express drying of the leaves using an iron. Just remember that the leaves are not sterile, so it is better to iron them on a surface that you don’t mind throwing away later, for example, on large sheets of paper. You also need to place a sheet of newsprint or a paper napkin on top of the sheet before ironing.

AUTUMN LEAVE APPLICATION TECHNIQUE

Before you start work, cover the table with oilcloth so as not to stain it with glue. Prepare the base - a sheet of cardboard, collected leaves, scissors, glue, tweezers.

First you need to come up with a future picture. Then arrange it on a separate sheet of paper. And only then start gluing the individual leaf parts to the base. It is best to apply the glue in droplets along the edges. If you apply glue to the entire surface of the sheet, it will warp when the application dries.

The finished picture should be placed under a press for one or two days.

Don't forget to frame it!

4.

TYPES OF APPLICATIONS

Overlay applique. Try to start by coming up with pictures that do not require cutting out any details from the leaves, but are created by overlaying the leaves. You can come up with a lot of such pictures: butterflies, mushrooms, chickens and other birds... The missing elements can be drawn in with a felt-tip pen or made from other natural materials.

Having mastered simple pictures, children can begin to come up with multi-tiered images. In this technique, leaves are glued on top of each other in layers. The application will turn out bright and cheerful if the leaves are different in color.

5.

6.

Silhouette applique.

In this type of appliqué, excess parts of the leaf are cut off so that the result is exactly what the little artist intended.

7.

8.

9.

10.

11.

12.


Modular application (mosaic).

Using this technique, a picture is created by gluing many leaves of the same or similar shape and size (or, for example, maple seeds). This way you can make the scales of a fish, the tail of a cockerel or a firebird.

13.


Symmetrical applique.

It is used to create individual images or entire paintings with a symmetrical structure, as well as to obtain two completely identical images (for example, reflection in water). To do this, you need to select similar leaves to get an image with its “reflection” or symmetrical in itself (“Butterfly”, “Dragonfly”, “Landscape with a lake”, “Boat on the river”).

14.

15.


Ribbon applique- a type of symmetrical applique.

Its difference is that it allows you to get not one or two, but many identical images - ornaments. You get a whole “round dance” of trees, flowers, mushrooms, butterflies, etc.

In conclusion, here is a small selection of pictures collected from different parts of the Internet - to awaken the first associations in you and your baby. One has only to show the child how this is done, and his imagination will allow him to create more and more pictures from this amazingly beautiful natural material - autumn leaves!

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

29.

30.

31.

32.

33.

34.

35.

36.

37.

Source: http://allforchildren.ru/article/autumn01.php

And these work samples are taken from

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

26.

27.

28.

Handicraft master class "Landscape of autumn leaves"

Annenkova Elena Nikolaevna, teacher of fine arts and technology, Glebovskaya Secondary School, Fatezhsky district, Kursk region.
Description of material: I offer you a master class on creating an autumn landscape using floristry techniques. This material is aimed at middle and senior level students and will be useful to technology teachers, additional education teachers, and all creatively oriented people.
Purpose: DIY gift, decorative interior decoration with an original product.
Target: creating an autumn landscape from dried leaves.
Tasks:
1. get acquainted with the basics of floristry techniques,
2. develop imaginative thinking,
3. develop creative abilities, aesthetic taste, environmental consciousness.

All art originates from natural sources. Leaves, flowers, twigs, herbs, and spikelets make up a non-woven carpet, forming bizarre, intricate patterns. You can not only enjoy this beauty, but also continue it. Natural material- a storage room for the development of children's creativity. You just need to know how to manage the wealth from this pantry. With a little imagination and perseverance, wonderful paintings can be made from the simplest materials. The main idea of ​​such creativity is for children to realize that nature, even in the smallest particles, is a reflection of the entire vast world as a whole.
One of the directions in working with natural materials is floristry. This word translates as "flat ikebana".
Each blade of grass is uniquely individual, has its own, unique silhouette, pattern, and evokes certain associations: cineraria leaves with snow-covered trees, yarrow heads with a blooming apple tree, lupine flowers with flying birds...

I'm trying to reach timid souls
Tell your students:
In the hands of skilled people, maybe even
Dry branch bloom.
I teach you to take Nature as a co-author,
After all, we all originate from it.
Art that serves the people
She rocked it in her hands.

To work in floristry techniques, you need to dry leaves, flowers, inflorescences, and herbs. To do this, use a stack of old newspapers. The material to be dried is laid out between layers of newspapers and placed under a press. To ensure that parts of the plants do not lose their color, after 3-4 days they need to be transferred between layers of new newspapers.
For landscape work we will need:
- dried leaves of corn, birch, willow and other trees, twigs of wormwood, a large poplar leaf, woody lichen;
- a sheet of blue matte cardboard (it doesn’t stick well to glossy material),
- a sheet of tracing paper,
- scissors, PVA glue,
- a clean cloth.


Take a sheet of blue cardboard and draw a horizon line.


We crumple the sheet of tracing paper and smooth it slightly.



We spread glue on the future sky, paste on crumpled tracing paper, forming small folds. Press the tracing paper well with a cloth. Trim off the excess around the edges. The result was cirrus clouds.




We lay out dried corn leaves, simulating fields, half a poplar leaf - a hillock. Thus, we create a preliminary drawing using the leaves.


We start gluing the leaves from the horizon line. First, the poplar leaf is a tubercle.
We spread the sheet with glue, placing oilcloth on it, and press it well with a cloth to the background.
If necessary, you can put the work under a press (something heavy).



Apply glue to the next sheet and glue it in the same way. Glue a willow leaf nearby, creating a horizon pattern.




Gradually fill the entire lower part of the cardboard with corn leaves.






Next stage: we lay out birch leaves and other small leaves of a different shape, imitating trees; twigs of wormwood, imitating grass on the field. We place smaller leaves closer to the horizon line, and larger ones below the previous leaves.


We glue the details of the composition one by one.



And smear the wormwood branches well with glue and stick them on the corn leaves.


The final stage: we glue wood lichen on the horizon line, imitating the mass of trees in the distance.


All that remains is to insert our landscape into the frame. http://allmyhobby.ru/publ/roza_sorta_quot_zolotaja_osen_quot/20-1-0-2036

Hello dear friends! Putting my decorations aside, I decided to relax a little and plunge into the world of my favorite floristry. It's golden autumn outside and I have brought out for you a new variety of roses with the same name "Golden Autumn"))).

Of course, this is not a real rose, but a rose made from leaves. I use aspen leaves because they look the most like rose petals. In floristry, flowers collected in this way are called glamelia. For those who are not familiar with this name, let me explain: this is when a large flower is collected from individual flower petals (roses, lilies, gladiolus, etc.), each of which is planted on a wire.

And so let's get started.

We will need:

1.Aspen leaves of different sizes and different colors

2. Thin wire, I use floral broth

3. Floral tape

4 Scissors

First you need to select about 30-35 leaves of different colors, increasing evenly. They must be fresh (it is much more difficult to work with dried leaves), clean (if the leaves are dusty, rinse them under water)

We’ve chosen it, okay, now we need to cut off the petiole from each leaf.

Now let’s prepare the wire by cutting it into 8-10cm pieces in an amount equal to our leaves.

Now prepare the tape, tear 4-5 cm pieces in the same quantity as the wire

Great, now let's get down to work.

I start from the largest petal. We take the largest leaf and thread a wire through it, about 0.5-0.7 cm from the bottom edge

We bend the wire, doing everything very carefully so as not to tear the sheet.

Now take the tape and place one end on the wire from the front side and pinch the whole thing between your fingers. Under the warmth of your hands, the tape will slightly stick to the leaf

Now we need to wrap the entire wire with tape. To do this, we begin to slightly stretch and wrap the base of the leaf and the wire stem with tape.

This is what you should get (front side)

Wrong side

To make sure that everything is done correctly, turn the leaf horizontally, it should adhere tightly to our artificial cuttings

Thus, we make cuttings for the remaining leaves, except for the smallest one.

Now take the smallest leaf

Roll the piece of paper into a narrow envelope

Take the wire and pierce all layers of the envelope

bend the wire as on the other sheets

We take the tape and wrap our cutting

Here are all our future rose petals

Well, the first stage is finished, let's start assembling

We take the core and the leaf next to it in size (we slightly bend the leaf at the base of the cutting to the back, the looseness of the rose depends on the angle of the bend, the larger the angle, the more blooming the rose will be)

We apply it to the core, as if wrapping it. We place the cuttings strictly PARALLEL

We take the next leaf and place it on the opposite side of the second petal (we have the core of the first leaf), as if trying to wrap the edges of the second

When all the petals are collected, you need to turn our flower over and secure the stem; to do this, wrap the stem with tape

Here's what we got

When the leaves dry they will curl up and the rose will become more curly, something like this, this is a rose I made last fall

You can make any number of these flowers, in different sizes and colors.

How to use this is a matter of taste.

I made 2 panels from these roses (sorry for the photo quality)

To make roses look more glossy, you can spray them with hairspray

Oshibana is an ancient art of Japan. The available master classes allow you to quickly master this technique, and you will be able to create beautiful paintings from flowers.

What is an error?


This word came to us from Japan, where this art form first originated more than six hundred years ago. Oshibana is called flat floristry. Pressed natural materials are used as the main material. It can be:
  • dried flowers;
  • dried leaves;
  • grass;
  • tree branches;
  • seeds;
  • fruit;
  • Poplar fluff;
  • sometimes - dried fruits and vegetables.
This natural material is dried by placing a weight on top. First, paper is placed on a sheet of plywood, and straightened plants are placed on it. Then, paper is placed on top again, and plywood is placed on it. On which you need to put a weight and dry the herbarium for a week.

Replace the paper with fresh paper daily to allow the plants to dry out. And remove the damp ones.


When the natural material is dry, iron it through a double layer of gauze. The prepared materials are glued to thick fabric or paper.

A distinctive feature of oshibana is that plant materials practically retain their original color and do not fade. This is achieved by pumping out the air between the work and the glass covering it. In such a vacuum, the material is better preserved. Now you can also buy various devices in the form of mini-pumps from us to apply this technique and make your work durable.


You can first come up with a topic for your work, select material for it, or create a composition from what you already have. Once you have prepared everything you need, you can begin.

Oshibana - master class on painting with flowers


To create such a picturesque picture, you will need:
  • dried pansy flowers;
  • dried leaves;
  • PVA glue;
  • tassels;
  • tweezers;
  • sheet of cardboard;
  • White paper.
If you have white cardboard, leave it as is; if it is gray, then you need to glue a sheet of white paper on top. Draw on it the features of the future landscape using a simple pencil.

Very carefully, using tweezers and a thin brush, you will transfer the pansies coated with glue to the prepared place. Blot excess glue with a napkin.


In this case, flowers occupy the corner part of the space. Glue the larger ones closer to the corner, followed by smaller flowers. Decorate them with thin leaves or under dried grass.

In another part of the composition there is a butterfly. Make her wings from reddish aspen leaves, and draw her body with black gouache. Using the same composition, make the edging for the wings.

Once the glue has dried, you can frame the picture. If you want, you can first coat it with varnish.


Using the oshibana technique you can create not only paintings, but also decorations. See how the following is formed.

How to make a flower decoration with your own hands - technique


Here's what you'll use for this:
  • epoxy resin;
  • dried plant;
  • accessories.
Follow these steps:
  1. You can use a stencil or take a medallion blank into which you will pour resin. First, prepare this substance as written in the instructions for this material.
  2. If you are using a stencil, then place it on a flat, clean surface, covering it with a file on top. Then you can pour epoxy resin here in small portions and distribute it with a toothpick. Now it is very important to prevent dust and dirt from getting on the wet surface. To do this, cover it with a lid on top.
  3. When the resin dries a little, put the prepared dried flower in it and fill it with resin on top. Then this semi-finished product must also be covered with a lid to prevent dust from entering.
  4. When the medallion is dry but still pliable, make a hole at the top with an awl to insert the fittings here. Attach a chain to it to wear this beauty around your neck.

If you decide to get serious about creating jewelry from flowers and resin, then you can buy special molds, which will make the work easier.


But let's return to the classic mistake. Watch master classes that will help beginners master the interesting art of Japanese masters.

Paintings from oshibana flowers: easy master classes for beginners


It is not necessary to use only flowers and leaves to create canvases. These decorative elements can be used to decorate, for example, photographs of a loved one and give him such an original portrait.

To carry out the work, you need to prepare the following materials:

  • photograph of a person;
  • colored paper;
  • scissors;
  • glue;
  • dried flowers and leaves;
  • tinsel;
  • colored pencils or paints;
  • sheet of cardboard;
  • frame.
Making master class:
  1. If you want to dress the heroine of the portrait at your own discretion, for example, so that the dress is antique, then you will need to cut it out of paper of the desired color. But first draw its outlines.
  2. Glue the portrait to the top of the picture, and the dress below. Arrange dried small flowers in a bouquet, glue its elements so that the heroine of the composition holds this beauty.
  3. Oshibana allows you to create outfit details, for example, this hat. It consists of one large leaf, small flowers and stems. You can decorate your headdress with a piece of fur or feathers.
  4. You can also create a beautiful skirt from flowers. You can take tulips for this. Make a tinsel trim. Glue various flower or paper decorations onto the panel.


Another beauty created using the oshibana technique can be achieved by using flowers.

  1. To do this job, you will need to first dry iris petals, pansies, and various other small flowers. Draw the outlines of the future beauty on cardboard with a simple pencil.
  2. Taking the iris leaves, glue them to the appropriate place. You can also cut out the back for the top of the dress from iris. The sleeves are created from lighter petals, you can even use roses.
  3. Make a head decoration from pansies. Place smaller flowers in the girl's hands to make a bouquet. You can use the same composition idea as in the photograph. Where the girl seems to be looking in the mirror, so she is illuminated from two angles.

You can also create a magical fairy using the oshibana technique. She is almost entirely made of flowers, even her butterfly. Draw the facial features with a colored pencil, and also use a brown pencil to draw the body of the insect.



With your children, collect various leaves in the fall so that in winter you can make beautiful compositions from them. From large ones you will make picturesque hills, and small ones will turn into leaves of various trees. In the foreground you can glue small flowers, which will become a picturesque clearing.


If you have many flowers, then dry them in the shade on a flat surface as described at the beginning of the article. See how they should turn out.


As you can see, this plant material should retain its colors. Now you can make, for example, a vase of flowers. This craft is perfect for beginners.


Create the vase itself from colored paper. Glue the flowers on top so that they form a bouquet and the cardboard is almost not visible through them.

The art of oshibana is the use of other materials. For example, you can take birch bark, remove the top layer from it and apply it. Look how beautiful the roofs of the houses will be.


If you want to make winter compositions, then the roof will look snow-covered if you use birch bark. But you can also create an autumn landscape from these materials. In this case, large leaves will become the outlines of bushes, and small ones will show off on the trees.

Painting made from natural materials


At first glance, it is difficult to guess what this picture was created from. Look at exactly what natural materials were used to create the work using the oshibana technique. Find out what paints for work can be obtained from certain plants:
  1. White - from the leaves of thin corn cobs.
  2. Gray - from silver poplar leaves.
  3. Light gray - from cineraria.
  4. Dark gray - from sedge leaves that lay on the ground and darkened.
  5. Yellow - from the leaves of young willow or autumn leaves of various trees.
  6. Red - from hazel leaves.
  7. Red - from the autumn leaves of maple, viburnum or other trees and shrubs.
  8. Brown - from oak leaves.
  9. Green - from dried currant leaves.
  10. Blue are delphinium petals.
  11. Sea water can be created in a painting if you use the leaves of a young silver willow, and river water can be created from poplar leaves.

To obtain a dark brown color, scrape the pulp from the banana skin and dry the remaining skin completely.


But what auxiliary materials and equipment will be needed to create a picturesque composition of leaves. This:
  • PVA glue, but not stationery glue, but for working with wood;
  • cardboard;
  • tweezers;
  • scalpel;
  • brush;
  • scissors.


Using a thin pencil, outline the outline of the future painting on the cardboard. Draw a horizon line, indicate where the house, mountain, tree will be located.


Now start filling in the background and the largest objects with plant material first. Take the leaves with tweezers, coat one side with glue and apply to the desired place.


Once you have completed this part of the work, move on to smaller elements. Also glue them to the designated place. If you need to create the smallest details, such as highlights, shadows, then cut the leaves of the desired color with scissors and glue them.


See if everything is okay? Perhaps more plant material needs to be added somewhere. Do it.


When the painting from natural materials is completely created, put it under a press overnight. When it's dry, it's time to frame it in a glass frame. It will prevent dust from settling on the work and will make the material more durable.

Floral painting - technique

Trees and shrubs will bloom in spring. Don't miss this time. Hurry up to collect fallen flowers to use them in paintings.

Look how wonderful the cherry blossoms look. It will be enough just to dry them and you can create such a floral composition using the oshibana technique. First, take cardboard of a darker color, for example, blue. Then the white petals will be clearly visible against this background.

You will make buds that have not yet opened from petals, which need to be cut to the shape of a given part of the plant, or take real buds.



If you have an apricot or apple tree that blooms pink flowers, then use this natural material. The result is a delicate picture that will decorate any room. You can make a bird out of feathers and glue it to a branch.


You can take pelargonium flowers, which retain their original color for a long time. But dry them as quickly as possible to avoid losing their vibrant color.


Mistake involves the use of a variety of natural materials. See what interesting work you can create if you use them.

DIY painting “Mill” made from natural materials


To get this composition, you need to take:
  • tweezers;
  • scissors;
  • medical syringe without a needle;
  • sharp knives, like a scalpel;
  • gouache;
  • watermelon seeds;
  • pieces of apple and cherry bark;
  • bamboo sticks for frame;
  • small pebbles, sea sand, crushed stone;
  • thin tree branches;
  • fine vegetable mesh.
First you need to print out the outline of the mill on a piece of paper.

Mix blue gouache and glue in a ratio of 1:10 and apply this solution with a sponge to the base. Use burlap as a base, gluing it to cardboard.


Glue moss onto the walls of the mill using PVA.


Make the mill blades from thin viburnum branches. To do this, draw glue into a medical syringe without a needle, squeeze this substance onto the place indicated on the canvas and attach the branches.


Cut the watermelon seeds in half crosswise to reveal their white interior. These “bricks” will help create the front wall of the mill. Make this masonry by arranging the natural material in a checkerboard pattern.


And you will create a side wall from seeds, the untouched part of which must be placed towards the audience. In this case, the cut rib will be on the canvas.


Make a window frame from thin branches.


Attach flat pebbles to the corners of the walls using glue.


Cut the bark of a cherry or apple tree into strips and glue them onto the roof, starting from the bottom. Moreover, the upper elements of the tiles should cover the lower ones by about half a centimeter.


Generously coat the bottom of the work with glue and add sea sand or small pebbles there.


Transform the vegetable net into a fishing net, as if it had been hung to dry in the sun.


Draw clouds with white gouache or glue poplar fluff.


The dried work can be framed using bamboo stems or other natural materials.

That's what it is - an error that allows you to make amazing paintings from flowers and other natural materials. It is interesting to watch the creation of such works

We invite you to see how a painting is created using the oshibana technique.


Samples of work and useful tips await you in the second story.

Panel “Sunny Bouquet”. Master class with step-by-step do-it-yourself photos for children over 6 years old.

Panels using natural materials

Polyakova Lera, student of MBDOU "Combined Kindergarten No. 8 "Aistenok" Michurinsk
Supervisor: Sidorova Zoya Grigorievna, teacher of MBDOU "Kindergarten of a combined type No. 8 "Aistenok" Michurinsk
Description: This master class is intended for children from 6 years old, educators, additional education teachers, loving parents and creative people.
Purpose: gift, interior decoration, work for exhibition
Target: making panels from natural materials
Tasks:
learn to use dried leaves to create panels;
expand children's knowledge about the plant world;
develop creativity, imagination, fantasy, aesthetic taste;
cultivate hard work, patience, accuracy, and a desire to protect nature.

Flowers are a miracle created by nature. There are no ugly flowers. They are all different - large and small, magnificent and graceful, colorful and strict. We decided to create flowers from dried leaves. Having selected the leaves according to color and shape, we made the “Sunny Bouquet” panel.

I asked Lera why she decided to call the panel that. Without hesitation, she replied that the leaves and flowers are so bright, they shine so much that they look like the sun.
A bouquet of flowers - what could be more wonderful,
What could be more tender and desirable!?
A bouquet of flowers can only be compared with a song,
With that song that I can't forget.


Materials required for work:
1. Black fabric (cardboard is possible)
2. PVA glue;
3. Scissors;
4. Glue brush,


Safety precautions when working with scissors
1.Scissors must be well adjusted and sharpened.
2. Store the scissors in a specific place (box or stand).
3. When using scissors, be as careful and disciplined as possible.
4. When passing the scissors, hold them by the closed blades.
5 Place the scissors on the right with the blades closed, pointing away from you.
6. When cutting, the narrow blade of the scissors should be down.
Rules for working with PVA glue
1. When working with glue, use a brush if necessary.
2. Take the amount of glue that is required to complete the job at this stage
3. It is necessary to apply the glue in an even thin layer
4. Try not to get the glue on your clothes, face, or especially your eyes.
5. After work, close the glue tightly and put it away
6. Wash your hands and work area with soap and water
Natural material will be useful to us:
Dried parsley leaves


Beautiful leaves of bushes and trees (small)


Making panels:
Using scissors, cut a piece of fabric of the required size (I have size A 4)


Beautifully arrange parsley leaves



We make flowers from leaves of approximately the same size


Glue it on the panel


We arrange several yellow flowers evenly


From red leaves we make a flower in the same way


Glue it on the panel next to the yellow flowers


We do the same with another pink flower.



We frame the panel


The panel is interesting, looks bright in the interior




The language of flowers is understandable to everyone.
We inhale the scent of flowers,
He is sweet and pleasant to the heart.
The bouquet - it pleases our eyes!

Thank you for your attention, dear colleagues! Happy creativity to you and the children!