How to make a piston longer in Minecraft. How to Make Sticky Pistons in Minecraft and How to Use Them

Hi all! Today we will try to figure out one of the integral parts of minecraft, namely pistons. Here, beginners will learn: how to make a piston, the function of pistons, the differences between a sticky piston and a regular piston.

So, to craft a piston we need:
1 redstone
1 iron
3 boards (type of wood does not matter)
3 cobblestones.

We lay out all this as shown in Figure 1.

This is a recipe for a regular plunger, to make it sticky you just need to take a regular plunger and add mucus (Fig. 2). So we made 2 types of piston.

Why are pistons needed in Minecraft?

But now a question arises. Why did I even craft them? Here you can move away from explanations a little. Pistons were added to Minecraft in beta 1.7 and brought with them the other half of the game's fun. We are talking about redstone schemes that make Minecraft not just a game about survival, but something like a construction set, where every mind can come up with something of its own. But today is not about schemes.

Now, let's look at the most basic function of the piston. First of all, you should know that the piston has 2 states - passive and active. Passive is the normal position of a block. Active - when a redstone signal is connected to the piston, then its front part moves forward (Figure 3).

This front part is capable of moving blocks forward, but after the signal is turned off, it leaves the block in the position it moved it to. This is the function of a conventional piston (Figure 4).

The operation of the sticky piston is slightly different; it also moves the block forward, but when turned off, it “takes it back” (Figure 5).

From such basics, people have come up with the most ingenious mechanisms. For example, a system of leveled enchantments. I'll explain how it is. Sometimes people encounter this problem: you have fully equipped the enchantment and now it can enchant objects to the highest level, but bad luck! For example, you need to enchant a pickaxe not to level 30, but let’s say level 10, you don’t want to break book blocks, what should you do?

And here pistons come to the rescue and help solve the problem. The pistons simply move the book blocks into the area of influence of the enchanting table. This way you can build a suitable level. There is also an automatic farm for collecting pumpkins, watermelons and canes. Everything is much more complicated here, so it’s better to google it yourself, or find a video on YouTube.

I hope this information helped you. Good luck to all! Let the diamonds find you themselves;)

The piston is one of the indispensable elements of the Minecraft game. With its help, players have the opportunity to create different mechanisms to advance their heroes.

How to make a piston in Minecraft - appearance

At first there was no piston launch in the game. One of the players suggested introducing it into the Minecraft toolkit. He independently developed the first version of the piston and sent it to the developers for consideration. A subsequent update added this tool to the game. After this, all players were able to use the new feature in Minecraft.
At first, some problems often appeared when activating it. The most common of them is throwing the character up.
The developers decided to slightly improve the functionality and eliminate shortcomings. When update 12w27a (1.3.1) was released, the piston began to work much better; players no longer encountered such difficulties. From that moment on, the piston became one of the most useful and used tools in the Minecraft game.

How to make a piston in Minecraft - the purpose of the combination

The “piston” function is needed to create objects in the game such as a car, elevator, mechanical door, trap or cannon. The appearance of these objects is possible because the piston is capable of moving the game blocks horizontally and vertically. However, the maximum movement is possible only for 12 blocks.
This tool affects some objects and individual characters. Thanks to the piston, obsidian and bedrock can be moved in the game.
In the game, this move is unaffected by lava and water, and is also capable of destroying torches and pumpkins. However, it is easy to break with a regular blow.
Due to the content of a certain code in some blocks, the piston will not be able to affect them. Such exceptions include: portal; sign; spawner; box.

How to make a piston in Minecraft

In order not to look for a piston in the game, you can try to create it yourself. There are 2 types of tools for this:

regular piston;
sticky piston.

To create a regular move, the player will need the following materials:

iron ingot;
boards – 3 pcs.;
cobblestones – 4 pcs.;
red dust.

These materials can be obtained in the game as follows:

iron ingot is mined by melting ore;
to create boards you will need wood species;
cobblestones are mined with a pickaxe from stone blocks;
Red dust is mined from red ore blocks, and they are hidden underground at the diamond level.

A sticky piston is created when it is necessary to obtain a mechanism that can return the blocks to their original positions. It allows you to improve the operation of some game systems.

To create a sticky piston you need:

find slime that appears from small cubic slugs that live in caves and mines;
attach it to the main mechanism of a conventional piston.

To all those who like the game minecraft, this little article is for you on how and from what to make a regular piston and a sticky piston. The pistons in this game are designed for many tasks. With the help of pistons you can make all sorts of trinkets, traps, homemade glass doors that open, retractable stairs, gates and much more.

How to make a piston and sticky piston in Minecraft

In order to make a sticky piston, we need to assemble an ordinary piston. And so we assemble an ordinary piston and for this we need the following ingredients: three boards, four cobblestones, red dust and an iron ingot. By adding all these ingredients in the correct order, we get a piston.

To invent a sticky piston, we need a ready-made piston to make a piston out of it and a clot of mucus. We can find a clot of mucus by killing one or more slugs. Making a sticky piston is very easy; put an ordinary piston on a workbench and sticky mucus on top of it.

The difference between a simple piston and a sticky piston is that when the sticky piston pushes the blocks, they return back when the piston is deactivated. A regular piston simply pushes the blocks in the right direction. Most often it is used in the construction of retractable stairs.

Video - how to make a plunger and sticky plunger

One of the many uses of a sticky piston

With the help of sticky pistons and pressure plates you can make a very interesting design that is inaccessible to mobs. After building a house, you can build a trap at the entrance doors and windows. More precisely, it will not be a trap, but protection from mobs invading your home. And so what we need for this. Depending on how many doors and windows you want to line with these traps. In order to place a trap in front of the front door, we need to dig 1 block of earth and insert a sticky piston there; if we have a doorway of two doors, then we dig into a hole 2 meters wide, that is, two blocks of earth. In front of the sticky pistons inserted into the ground, we place pressure plates, with the help of which the pistons will rise, blocking the path of mobs. You can protect windows in the same way.

If you play Minecraft, then almost unlimited possibilities open up before you. You can interact with all objects in the surrounding world, create new ones, build huge and large-scale structures, start wars with mobs, or settle on your own farm, growing vegetables and raising livestock. In general, you are given complete freedom of action, and most importantly, a large assortment of tools that will significantly diversify your time in the game. Each block can be examined for a long time, studying its capabilities. For example, you can take a sticky piston - this is a very unusual device that has useful properties, but is quite simple to make. And if you want to find out, then you just need to read this article.

Creating a piston

If you want to learn how to make sticky pistons in Minecraft, then you need to understand that they are crafted from ready-made regular pistons. These blocks also have a useful feature that allows you to move up to twelve blocks to one side automatically. This opportunity will come in handy, so it’s time to learn the recipe for making these blocks. To create them you will need various materials. Start with cobblestones, since you will need the most of them - four pieces to make one piston. Also prepare three planks, one redstone and one iron ingot. Place the last item in the center of the workbench, place redstone under it, there should be cobblestones on the sides, and three boards on top. That's the whole recipe for a simple piston, which you can already use as an independent mechanism or as part of a larger circuit. Now that you know this recipe, you can figure out how to make sticky pistons in Minecraft.

Getting slime

The next step if you're trying to figure out how to make sticky pistons in Minecraft is to mine the slime. This is the next component for creating this block, and without it you won’t succeed. To get slime, you will need to kill slimes. Unfortunately, this will have to be done for quite a long time, since to create a unit of material you need ten blocks of slime, and each slime drops a maximum of two blocks. Or it may happen that none will appear at all. But when you already have at least one unit of slime, you can start crafting the final object. Now you will learn how to make a sticky piston in Minecraft.

Craft sticky piston

All stages of preparation have been completed, you have obtained both a regular piston and mucus for it. It's time to learn how to make a sticky piston in Minecraft. To make this you won't need anything other than the ingredients you already have. As you already know very well, you have space in your inventory to craft things that have fewer than five ingredients and do not have a clearly defined shape. With the sticky plunger, you only have two ingredients, so you don't even have to worry about having a workbench - you can get by just fine without one. Combine these two elements, and you will end up with what you wanted. Now you know how to make sticky pistons in Minecraft, but you still have to figure out how to use them.

Using a sticky plunger

From this article, you have already learned how to make a piston and a sticky piston in Minecraft. You were even told a little about how to use a regular model. But so far nothing has been said about the sticky analogue - how does it differ from the standard version? In fact, there is only one difference (not counting the appearance, we are talking about functionality). When you use a regular piston, it pushes the blocks away and returns to its original position. If you use a sticky piston, it moves the blocks away in exactly the same way, but the first block it touches returns to its place along with the piston itself. Some novice gamers may wonder why this is even necessary. But if you have already played Minecraft for some time and are familiar with the principles of design, then you should not have such questions - this effect can be very useful when creating various schemes and objects, for example, when installing large doors or gates, as well as organizing secret passages. You can also, of course, come up with your own options for using this extremely useful block.