How to draw cool cars. Step by step lessons: how to draw cars

In this lesson you will learn how to quickly draw a crossover car, step by step, with a pencil. A car in this class is slightly larger and heavier than other types of passenger cars, so the wheels of this car are higher and wider than those of ordinary passenger cars. For better off-road performance, this vehicle has a high suspension, which means there will be more clearance between the body and the ground. The modern streamlined design of the car body is not very easy to reflect in a drawing, so we will draw the car without additional design elements, only the base of the car body.
If you can do it right draw a car step by step with a pencil, you can then add additional design elements, such as an air intake and a spoiler, etc. The picture drawn in pencil can be colored with colored pencils in the penultimate step of this lesson.

1. Draw a simple general outline of the car

Draw a car not easy, so it is necessary to make the correct preliminary marking of the general contour of the machine. To make this task easier, draw two parallel lines 2.5cm apart. Divide these lines into two segments of 6 and 8 cm. If you draw a larger car, on an entire sheet of paper, then increase these numbers proportionally. At the same stage of the drawing, next to the straight lines, draw lines at an angle, and delete the first contour lines.

2. Draw the contours of the roof and wheels

Try to make exactly the same markings for the wheels as in my drawing. Note that the right front wheel is further from the vertical edge of the outline than the left wheel. And the contours of the wheels themselves are not square, but rectangular. The outline of the car roof is easier to draw, however, try to make it as accurate as possible.

3. We begin to draw the shape of the car body

First, it is better to draw the streamlined lines of the body shape along with the hood, and then start drawing the contours of the fender liners. Between the outlines of the wheels, draw the lower part of the car body. Don’t rush to draw everything at once, look carefully at car drawing again before moving on to the next step.

4. Body and wheel shape

Start this step by removing all the extra contour lines from the drawing. After that, start drawing the wheels of the car. You may not be able to draw perfect circles right away, so don’t press too hard on the pencil. Now start drawing the body parts, glass, headlights. Detailed instructions on how draw a car impossible to give, just be careful.

5. Finishing touches on the car drawing

Car wheels are difficult to draw because they have to be perfectly round and identical. But drawing disks is not difficult. Any symmetrical figure, such as a star, is suitable for drawing a disk. When you draw the car's side windows, don't forget to draw the side mirror. Draw the rest of the body parts at your discretion, the main thing is that you can draw the shape of the body and wheels correctly and symmetrically.

6. How to draw a car. Final step

If your drawing of a car is made using a simple pencil technique, then you must shade the drawing. This will give the car a three-dimensional appearance and volume. But, probably, any car will look more beautiful if it is painted with colored pencils. You definitely need to draw the road and the landscape surrounding the car, then your drawing of the car will be a real painting.

Sports cars have a more streamlined, dynamic design and a low stance. In addition, they have low and wide car tires. This is necessary for greater stability on turns and better traction of the car with the road. Otherwise, the design of a sports car is no different from that of a regular passenger car.

The tank is one of the most complex military vehicles in design. The most important thing in drawing a tank, as well as in drawing a car, is to draw its frame correctly.

Nowadays it is rare to see wooden sailing ships. But even now they are the subject of many drawings. On our website there are many lessons on drawing equipment, including cars. In this lesson we will learn how to draw a ship step by step.

Drawing an airplane is not that difficult, much easier than, for example, drawing a car. In order to draw an airplane, you just need to know some of the features of its structure. For example, military aircraft, unlike passenger aircraft, do not have a passenger cabin, but only a cockpit.

Let's try to draw a hockey player in motion, with a stick and a puck, step by step. You might even be able to draw your favorite hockey player or goalie.

It is better to draw a tram against the backdrop of a city landscape. Draw a road, cars, and if you wish, you can draw people getting on the tram.

Cars are one of the favorite topics for drawing by children, especially boys. They often organize an unspoken competition to see who can create the coolest and most believable image of a car. Not everyone has the artistic talent to perform such a task, but these skills are trained. If a person shows enough persistence in mastering artistic intricacies, such a task as drawing a car will lose its complexity for him and will turn into something completely feasible and giving pleasure from the anticipation of the wonderful result of his efforts. Our tips are intended to help in the implementation of such plans.

How to draw a car step by step with a pencil: some subtleties of the process

Before you try to draw a car step by step, you should decide on its appearance. If you like a specific model, you need to get images of it, study it in detail, mentally divide it into separate elements: this way it’s easier to distribute the work into separate stages. In the case when a car looks too complicated to draw, it is advisable to resort to stylization or simplification, leaving only the key components, the main lines. For those whose artistic skill is not yet high enough, it is preferable to avoid excessive detailing of the product. Auxiliary lines and strokes drawn during the creative process are necessarily erased when the need for them disappears.

How to draw a car step by step for children

Difficulties with how to draw a car for children arise precisely because of the lack of simplicity of the form. They don’t have to try to repeat a certain model - they should depict a certain conventional car, like this one. First, an arbitrary rectangle is outlined with a smaller trapezoid above it - this will be the body part. Windows are drawn in it, wheels are added, preferably with rims. Approximately in the middle of the rectangle, a pair of parallel vertical lines indicate the edges of the doors. Smaller details are added: the edge of the steering wheel looking out of the window, bumpers, headlights.

How to draw a racing car

If the task is how to draw a racing or sports car, you can proceed as follows. A basic form of this type is created, consisting of a projection of a parallelepiped and a volumetric trapezoid in the desired angle. The contours are specified using it. First of all, the lower part is outlined, with the recesses for the wheels, and then they themselves are drawn, slightly oval due to the features of the projection. Now the bottom of the front is indicated, slightly rounded and with a low rise, and in a similar way - the rear. The top is slightly rounded, the boundaries of the glass are drawn, side mirrors are added, then several pairs of headlights are added. The edges of the doors, hood, and space for the license plate are marked. A spoiler and other details are added. Detailed step-by-step instructions are on this page.

How to draw a cool car: Dodge Viper

Many guys rush to learn how to draw a car with a pencil in order to further create images of cool cars. We will now consider one of the options, detailed instructions for which can be found. First, a blank is created, like this one, with two perpendicular lines drawn inside it, one of which will turn into the lower edge of the windshield. Now it itself is drawn, then the lower edge of the car, the outline of the body shape, the top of the headlights, the hood, and the seats for the wheels. A lot of details are added: a pattern running along the body, fog lights, radiator grilles, tires with rims, ventilation holes, mirrors, headlights. Hints on their location can be found in the link to the instructions.

How to draw a police car

Not everyone can cope with such a task of how to easily draw a car of this type. But it will be an easy job if you find the right instructions. It is permissible to follow the instructions given in this video clip. A text version of a step-by-step story about the process of creating an image of a similar company car is provided on this website. In fact, the image of any car, with the possible exception of sports cars, can serve as the basis for a police officer. All that remains is to apply some distinctive marks to the simple body. A block of flashing lights is drawn on the roof, located parallel to the bumpers. Side stripes, digital designations 02, and a small inscription “police” in a simple font are applied to the body.

How to draw a fire truck

Such a problem is not easy, but the following will allow you to solve it successfully:

The modern automobile industry surprises and delights car fans with a colossal variety of models that were difficult to even imagine just a few years ago, and accordingly, much more opportunities for artistic depiction have appeared. But in order to realize this creative impulse and draw a car, you need to know some subtleties.

What you need

In addition to patience and perseverance, to create a drawing of a car you will need:

Useful tricks

What to do if you really want to make a drawing, but you don’t have enough skills?

You can use some tips that will allow you to find a compromise between desires and capabilities.

Draw Lada Priora

The popularity of the Lada Priora car can be explained very simply: good price, relatively good quality, but in case of an unforeseen situation on the road it’s not too bad. So for young people who have just received their license, such a car is an excellent option. So teenagers are happily engaged in the graphic materialization of their dreams, namely, drawing the Priora BPAN.

This is interesting. The abbreviation BPAN stands for No Landing Auto No and denotes a community of motorists who prefer cars with modified suspension in the direction of lower ground clearance.

Instructions:

We start with sketches of the machine, that is, we draw two parallel lines - at the top and bottom.
We start the drawing by drawing auxiliary lines
Between these segments we draw two curved lines on both sides.
We take on the left wing, making its outline slightly curved to the left.
Underneath is an arch for the front wheel. To make the arch line more voluminous, we make it double.
For the volume of the arch, we make its line double
Draw the middle and side parts of the machine.
Make the door line curved
The next task is to show the rear door and fender. Make a line parallel to the bottom of the body.
Showing the arch under the wheel.
We outline the line of the rear bumper.
Draw the lines of the bumper, arches under the rear wheel and the lower part of the body
Let's move on to the roof. We make two perpendiculars to the front and middle windows. We draw a smooth line for the sloping rear window.
The lines of the windshield and roof should be smooth
We draw the rear part of the body: the trunk with a small circle and an oval - LED headlights.
Add a license plate at the bottom.
We are working on the image of the rear bumper. We show the reflective element with a small rectangle.
We complete the drawing by drawing the details of the rear bumper
Under the arches we draw semicircles with double lines - wheels. Use a soft pencil to determine the thickness of the wheel.
We draw a few strokes in the center and on the tires, and between these lines we show the stamped Lada wheels in small circles.
We erase the auxiliary lines, draw an outline and, if desired, color the car with pencils, felt-tip pens or paints.
You can color the drawing with simple pencils

Video: how to draw a Priora BPAN, starting with the windshield

Video: how to draw a Priora professionally

Drawing a racing car step by step

You can hardly find a car lover who would be indifferent to racing cars. Speed, mobility and beauty are what make race cars so popular. However, drawing this masterpiece of the auto industry is not so easy.

Instructions:

The basic rule for depicting a racing car is to first convey on paper the most simplified sketch possible. In this case, we start by drawing an elongated body.
We start the drawing with auxiliary lines
To add volume, we add the upper part - the driver's and passenger seats. Along the outer edge, based on a line drawn parallel to the outer edge, we build the interior frame.
To add volume, draw the roof lines and interior frame
Let's start with the bottom part. We draw the bottom line, making recesses for the wheels.
Draw the recesses for the wheels, round off the line of the rear bumper
Due to the fact that the car is located at an angle, we make the wheels oval.
Due to the fact that the machine is located at an angle, the wheels should not be round
We make the lower part of the car curved.
To give the correct shape, we round the front part of the body
Let's move on to the top. Add a side mirror and soften the initial lines with soft strokes.
Soften the top lines, finish drawing the side mirror
Add two lines of the car to the side and back.
Add lines to the side and back
We erase the extra lines and work out the details. We start with the front lines and add headlights.
Remove extra lines and draw headlights
Draw a line at the bottom, as well as a rectangle for the number.
We finish drawing the license plate, detailing the lines of the car
Add several lines to the car windows, as well as a door line.
We complete the picture by drawing the doors and parts of the front of the car.

Video: two racing cars drawn from the cells of a notebook sheet

How to draw a fire truck

Modern fire engines are significantly different from those that first appeared in 1904. The old cars could accommodate 10 people and practically nothing of fire equipment. But modern models are so spacious that they have plenty of fire extinguishing equipment built into them.

Instructions:

We draw three parallel horizontal lines, which we divide in half with one vertical line.
For a fire truck you need to make four auxiliary lines
In one part we draw the cabin, starting from the upper part, and then drawing the lower part, which is almost half protruding.
We make a recess along the bottom edge for the wheels.
We depict the body in the form of a rectangle, with recesses for wheels along the lower edge. The height of the body is half the height of the cabin.
We start the drawing with the cabin and body outlines
Draw the wheels.
We mark the two right doors of the cabin.
We finish drawing the stairs on the body.
In the wheels, don’t forget about drawing the rims; you can use a ruler to draw the stairs
We add headlights, as well as a coiled fire hose, which is attached to the side.
We complement the drawing with a fire hose and the inscription 01
The drawing is ready, you can color it if you wish.
The car can be painted with a simple pencil, but if you use paints, felt-tip pens or colored pencils, the main shades will be red and white

The next way to draw a special equipment car will be interesting even for those guys who are not very good at drawing.

Instructions:

Draw a rectangle and divide it vertically in half.
The basis of this machine will be a rectangle divided vertically in half.
On the left side we draw the cabin, draw double lines to draw the windows, and draw handles.
On the left side we draw a cabin with double lines of windows
We make windows on the body. To do this, we make the lower border just above the bottom of the cabin windows.
Drawing windows on the body
On top we add a rolled up fire hose and a tank.
We finish drawing the tank and a rolled-up fire hose on the body
We finish drawing the wheels and make the lines double.
Drawing wheels
We install a flashing light on the roof of the cabin.
We finish drawing the flashing light and inventory details
We complete the design details of the special equipment vehicle (for example, fire extinguishing tools that are attached to the outer wall of the lower rectangle).
We remove the contour lines, and draw the main ones with a soft pencil or felt-tip pen.
The car can be painted or left in the version with outlined contours

Video: how a child over 3 years old can draw a fire truck with a marker

Drawing a police car

Depicting a police car is a tricky business. To simplify the drawing process, it is recommended to start with auxiliary elements. In addition, for this drawing we will need a compass.

Instructions:

In the center of the sheet we draw two rectangles connected to each other by a common horizontal line. We will draw within the boundaries of this figure.
We start the drawing with two rectangles
The upper rectangle is the car body. We show its shape with an arc.
Showing the shape of the body with an arc
Add the front part of the car - the hood.
Finishing the hood line
Using a soft smooth line we connect the body and the hood. We erase the auxiliary lines of the rectangle in this area.
We connect the body and hood with a smooth line
Let's give it shape. We draw holes for the wheels, and turn the line separating the rectangles into a line that “separates” the top from the bottom of the car.
Slightly tilt the line of the front part and draw recesses for the wheels
We add a line for the trunk, rear suspension, as well as a line separating the windshield from the car body, and two vertical lines for the front door.
Add a line for the trunk and front door, and also separate the hood from the windshield
Use an eraser to erase all the extra lines, leaving only the outline of the car itself.
Removing auxiliary lines
Using a compass we make wheels.
Drawing wheels using a compass
Draw the lines of the window frames, using a ruler if necessary.
To depict windows, use a ruler if necessary.
We supplement the wheels with circles for the rims.
Draw contours and color if desired

Video: how to draw a police car without auxiliary lines

Photo gallery: drawing a Bugatti Veyron

We start the drawing with the base figure We draw the contour lines of the supercar, as well as the bumper, side body kit, wheel arches and hood We depict the contours of the headlights, three front air intakes, windshield and side windows, as well as the line of the driver’s door and another air intake We detail the model: we start with the meshes front air intakes, then move on to the headlights, rear-view mirrors, fuel tank cap, and finish with the wheels. Finish drawing the rims and tread on the wheels, remove the auxiliary lines. Draw the lines of the car.

Photo gallery: how to draw a convertible

We start with a sketch of the outline: the upper part has an oval shape, and the lower part consists of straight lines of different angles of inclination. We check the angles of inclination. We draw the front bumper, the right fender and the holes for the wheels of the car. We draw the windshield, the passenger side mirror and the interior of the convertible. We add fog lights and more. we draw in detail the hood of the car, the windshield We draw the side doors on the passenger side, the contours of the rear bumper, the interior of the car and the seats for passengers, after which we draw the folded roof of the car We finish drawing the wheels We draw the rims on the wheels of the car, paying attention to the symmetry of the spokes, we remove the auxiliary lines We draw the contours and optionally paint the car

Drawing a car with paints

If you plan to paint the picture with paints, then it is better to take a watercolor sheet of paper - this way the strokes will be smoother and more beautiful. Otherwise, recommendations for making a drawing in paints will be as follows:

you need to fill the contours with color only after the pencil base has been completely completed;
before coloring, wipe off all auxiliary lines - they will interfere;
if, in addition to the car, there are other elements in the drawing, then it is better to start with large details of the environment (roads, trees on the side of the road), but it is better to leave those objects that are in the background for last.

This is interesting. Models of toy cars can be drawn without pencil outlines, that is, directly with paints. And it is more convenient to do this with gouache, since the color is saturated and the contours do not blur, as in watercolor.

Higher philological education, 11 years of experience teaching English and Russian, love for children and an objective view of modernity are the key lines of my 31-year-old life. Strengths: responsibility, desire to learn new things and self-improvement.

From early childhood, boys are not indifferent to cars. Therefore, they not only play with them and assemble a body from a construction set, but also depict them on a sheet of paper. Creative potential in drawing is manifested in the reproduction of modern and rare cars of famous brands, military ground equipment and even cars of the future. The last point is especially interesting because of its idea due to the fact that, in addition to sketching, the child is asked to imagine a little, imagining what, in his opinion, the car of the future should look like in a pencil drawing. For example, will it be mirrored, glass, or even look like a spaceship on wheels.

While drawing a fictional car is not a problem for an adult, a child often needs small hints presented in the form of pictures. Therefore, in today’s article we decided to demonstrate options for already invented machines of the future, which you can sketch or use as a basis for your drawing with a simple pencil.

To inspire a child to draw an unusual and, one might even say, fabulous picture, parents need to come up with a presentation that includes an intriguing speech and printed pictures (photos). As an idea, you can use the teaching style of art teachers or psychologists, who, if desired, can even tell.

There is no need to limit the child in the objects necessary for drawing. It’s good if there are not only white sheets of A4 paper and a simple pencil on the table, but also felt-tip pens, watercolors, gouache and colored pencils. This approach will not limit the child’s actions.

Don't limit your baby's time! Let him spend as much time drawing as he sees fit.

Car of the future - pencil drawing for children, photo

Below in the article there are pictures of cars that were invented by adults, children and even famous brands that annually add new cars to their ranks. Among them: BMW (BMW), Audi (Audi), Volkswagen, Lifan, Toyota, Lamborghini, Porsche, etc.

Car of the future pencil drawing step by step

Drawing is easy! Video

In the video you can see how children learn to draw.

Many children like it because it allows them to express their thoughts and fantasies. This type of activity also promotes creative development. Sometimes kids want to draw their favorite cartoon character or toy, but it can be difficult for them to understand how to do this. A mother can help her child create his own masterpiece, suggesting all the actions step by step on the way to the goal.

Most preschool boys love toy cars, watch cartoons about them, and collect stickers. Sometimes girls have the same preferences. Therefore, you can consider how to draw a car step by step for a child. Of course, for very young children the drawings will be simpler, but for older children you can offer more complex ideas.

How to draw a car for a 3-4 year old child?

Very young children will find it interesting to depict even the simplest cars.

Option 1

A passenger car is very familiar to kids, so it would be a great idea to draw one.

The baby should be offered a sheet of paper and a simple pencil. He can independently draw a rectangle and draw a trapezoid on top.
Next, you should draw windows inside the trapezoid. At the bottom of the rectangle you need to draw two wheels. In front and behind, you can draw the headlights and visible parts of the bumpers in the form of small squares.
Now you can draw the door. To do this, let the child draw a couple of vertical lines on the rectangle. In the front of the window, you can draw a small strip at an angle, which will look like a piece of a steering wheel. Let the mother ask the baby to highlight the arcs above the wheels so that the picture becomes more expressive.
At the final stage, you should erase everything unnecessary using an eraser. Let the baby try to do it himself, if mom can help.

Now the picture is ready and, if desired, you can decorate it with pencils or felt-tip pens. The kid will surely be delighted by how easy it is to draw a car with a pencil practically on his own.

Option 2

Many boys like trucks. This is confirmed by the fact that almost all the guys have a toy dump truck or something similar. The kid will be happy to try to draw such a car.

First, the child must draw two rectangles of different sizes, in the lower left part of each of which there should be semicircular notches.
Under these notches you need to draw small circles.
Next, the semicircles should be extended so that circles are formed around the small circles. These will be truck wheels. The smaller rectangle on top should be drawn so that it looks like a cabin and depict a window in it. Next, the headlights and parts of the bumpers are applied to the corresponding places of the larger and smaller rectangles.
The child can decorate the resulting truck at his own discretion.

This is how your child can learn how to easily draw a truck. In the future, he can do this on his own, without the help of his mother.

How to draw a car with a child over 5-7 years old

If the child has already mastered some techniques and is happy to get acquainted with more complex methods, then you can offer him other ideas.

You can consider how to draw a pickup truck step by step

You can give this picture to your dad or grandfather, or you can show it to your friends and tell them how to draw a beautiful car.